•Use Bank Up & Down buttons to choose the bank you wish to copy.
•Press Add / Midi button.
•Select another Bank, in which you wish to copy using the Up & Down buttons.
•Press Music / Bank Copy button. All the LEDs will flicker, indicating that your bank is copied.
Delete a bank
•Use Bank Up & Down buttons to select the bank you wish to delete.
•Press Auto / Del and Music / Bank Copy buttons at the same time. All the LEDs will flicker,
indicating that the selected bank is deleted.
Create chases
•Choose any Chase from 1 to 6 to be programmed.
•Select the desired scene from any bank.
•Press the Auto / Del button. All the LEDs will flicker, indicating that the scene is copied to the
chase.
•Repeat the same steps for all the scenes you want to include in to the chase. You can copy the
maximum number of 240 steps, in to the chase.
•Note that scenes order in the chase, is the one you used when programmed the chase.
Copy a Bank in to a chase
•Use Bank Up & Down buttons to select a bank you wish to copy.
•Select the chase you want the bank to be copied.
•Press and hold the Music / Bank – Copy & Add / Midi buttons at the same time. Then all the
LEDs will flicker, indicating that your bank is copied in to the case.
Add a step in to a chase
•Select a chase in which you wish to add the new step.
•Press Tap Sync / Display button. The LED Screen shows the current chase and step.
•Use the Bank Up & Down buttons, to navigate through the chases steps, until you find the one
in which you would like to add the extra step.
•Press the Add / Midi button. One new step will be added, after the step you have chosen in the
previous step. It will also appear on the screen, indicated with a number. For example, if you
have pressed the Add / Midi button while the console was on the #10 step, your new step will
have the number #11.
•Pres Tap Sync / Display button for once more and the screen will resume in showing the Chase,
Scene and Bank numbers.
•Then navigate with Bank Up & Down buttons and choose the Scene button which includes the
scene you want to include in your newly created step.
•Press the Add / Midi button. All the LEDs will flicker indicating that the scene has copied in to
your newly created step, in to the chase.
