FOS Technologies Luminus Pole Manuel utilisateur

FOS Luminus Pole

User Manual

This manual contains important information.

Please read before operating fixture.

SECURITY TIPS

WARNING!!! To reduce the risk of fire, electric shock, or

injury to persons, follow these important safety instructions:

Rated voltage range: AC110V-120V/60Hz or AC200V-240V /

50HZ (to be selected).

Fixtures used in ambient temperature: -15 ℃-40 ℃, the highest

temperature of the surface of the lamp: 60 ℃.

Keep away from the liquid substance and humid environment.

Before using the lights must ensure the good grounding.

Do not use the fixture, in case of an abnormal behavior.

Technical Specifications

Power Supply: AC 100-240V/50-60Hz.

Power consumption: 90W.

Light source: 9pcs LED RGBWA+UV 6in1 mixing color.

Beam Angle: 25°.

Dimmer: 0-100% dimmer.

Strobe rate:0-24HZ.

Working Environment: -20℃-40℃.

IP rate: IP20, indoor.

DMX Channels: 2 DMX modes, 6 channels mode & 10 channels mode.

Control Mode: DMX512, Master-slave, Sound, Auto, Wireless, Wi-Fi,

Remote.

Battery:

Battery type: Lithium Ion.

Battery Charge Time: 6 hours (full power).

Battery Life: (two colors) 8hours, (single Color) 24hours.

Battery Power: 12V, 25Ah.

Wireless effective distance: 400 meters.

Net weight: 11kg

Production function:

DMX512 console control, which can be controlled online through 2.4G

wireless mode.

Mobile Wi-Fi operation control, support Android Android 2.3 and above,

Apple iOS 4.3 and above.

Mobile APP name: LED LAMP,Language: The software automatically

recognizes Chinese or English according to the system.

Static color selection (6 colors, dimming value 0-255) + strobe function

(speed adjustable 0-20).

Macro color: 16 colors to choose.

Automatic color jump function (speed adjustable 1-20)

Color gradient function (speed adjustable 1-20)

Color Sudden function (speed adjustable 1-20)

Strobe (speed adjustable 0-20)

2.4G wireless electronic switch, you can turn on or off the 2.4G

wireless power through the menu. You can know whether to turn on or

off the wireless module through the icon in the upper left corner of the

interface. The wireless transceiver frequency can be selected through

the menu.

White balance setting, adjust the brightness of the 6 colors

appropriately (also has the function of fine-tuning the current), the

value is (127-255)

The battery icon in the upper right corner of the interface can be turned

on or off by setting. For products without battery, it can be set to off

Screen saver settings: can be set to normally open or automatically

turn off the display backlight after 5 seconds, 10 seconds, 15 seconds

Infrared remote control function setting: can be turned on or off

through the menu setting.

Onboard Menu

MENU UP DOWN ENTER

Operate Menu

Menu Item1 Item2 Item3

"Choose Pattern" "Static" (Color) (Dimming)

RED 0-255

GREEN 0-255

BLUE 0-255

WHITE 0-255

AMBER 0-255

PURPLE 0-255

STROBE 0-20

"Macro" 1-32

(Speed)

"Show" "AUTO" 0-20

"FADE" 0-20

"SNAP" 0-20

"R-STRO" 0-20

"G-STRO" 0-20

"B-STRO" 0-20

"A-STRO" 0-20

(Sensitivity)

"Sound" "SOUND1" 0-100

"SOUND2" 0-100

"SOUND3" 0-100

(Options)

"User Settings" " Channel" 006/010

(Addressed)

" DMX512" 001-512

(Mode)

" Slave" OK

" WiFi" WiFi Icon

"System Settings" "1.white Balance" (Color) (Brightness)

RED 127-255

GREEN 127-255

BLUE 127-255

WHITE 127-255

AMBER 127-255

PURPLE 127-255

"2.Show Battery Icon" YES/NO

"3.Display Sleep" Open/5Sec/10S

ec/15Sec

"4.Autolock" YES/NO

"5.FAN Control" Auto/High/

Medium/Low

"6.Infrared Setting" ON/OFF

"7.Wireless Setting" ON/OFF

"8.Factory Reset" Password[----]

"Informations" "1.LED" (Temperature) 0-99℃

"2.WORK" (Hours) 001-999

"3.SOFT" (Version) 001

"4.LEVEL" (Percent) 10-100

1. 3-inch OLed display: display menu functions and parameters;

2.Button definition

Main menu function selection/exit submenu

Select the previous menu/parameter

increment

DOWN

Select the next menu/parameter decreasing

ENTER

Recognize the selected function / enter the

next menu

Switch machine operation:

When the power is off, press and hold the MENU button, after 3 seconds,

the display will light up and be in the power-on state, and you can perform

the required function operations.

When the power is on, press and hold the MENU button, after 3 seconds,

the display will turn off and the power will be cut off.

"Choose Pattern" selection pattern

Select “Choose Pattern” and press the ENTER button to confirm. The

display will show the corresponding function menu. Such as static color,

macro function color mixing, performance mode, voice control mode. Use

the UP/DOWN button to select among the functions. If you press the

ENTER button, the display will enter the next menu item, and if you press

the Menu button, you will exit to the previous menu mode. The parameters

will be automatically saved after selection.

"User Settings" user settings

Select "User Settings" (user console mode setting), press the ENTER

button to confirm, the display will enter the channel options, use the

UP/DOWN button to select "6Ch" (6 channel mode), "10Ch" (10CH

channel mode), When you press the ENTER button again, the menu will

automatically jump to the "DMX512" address setting mode. With the

UP/DOWN button, you can adjust the address code you need to set

between 1 and 512. After you select it, the parameters will be automatically

saved. If you press the ENTER key again, it will return to the main interface.

When DMX512 signal is received, the interface will display "Connection"

prompt. If the DMX512 signal is disconnected, the interface will display

"Disconnect" prompt. If you press the ENTER or MENU button, the display

will exit to the previous menu mode.

"Slave" slave mode

Select "Slave" (slave mode), press the ENTER button to confirm, "Slave

Mode!" will be displayed. Indicates that it has entered the slave receiving

mode state. After selection, the parameters will be automatically saved.

When the host signal is received, the interface will display "Connection"

prompt, if the host signal is disconnected, the interface will display

"Disconnect" prompt, if you press ENTER Or press the MENU button, the

display will exit to the previous menu mode.

"System Settings" system settings mode

Select "System Settings" (system settings mode), press the ENTER button

to enter the next menu, use the UP/DOWN button to select different

settings among the setting functions, press the ENTER or MENU button,

the display will exit to the previous Level menu mode.

DMX512 console control mode

In the "User Settings" interface, press the ENTER button to confirm.

"Channel" (channel mode) is displayed on the screen, use the UP/DOWN

button to select "6Ch" (6 channel mode) or "10Ch" (10CH channel mode) as

needed, press the ENTER button to automatically jump to "DMX512"

(DMX512 address) Code setting), use the UP/DOWN button to adjust the

address code you need to set between 1 and 512, and then you can receive

the DMX512 console control signal.

If you want to use this function, please refer to the following diagram to set

the DMX512 addresses of the first 4 fixtures:

6CH mode: 1: A001, 2: A007, 3: A015, 4: A022

10CH mode: 1: A001, 2: A011, 3: A023, 4: A035

Master and Slave machine built-in program control

When multiple fixtures are connected in the main and auxiliary mode,

except for the first one, select "Slave" (slave mode) for the other fixtures

behind, press the ENTER button to confirm, and "OK!" will be displayed.

Indicates that it has entered the slave receiving mode state. After selection,

the parameters will be automatically saved. When the host signal is

received, the interface will display a "Connection" prompt. If the DMX512

signal is disconnected, the interface will display a "Disconnect" prompt. If

you press ENTER Or press the MENU button, the display will exit to the

previous menu mode. The first light fixture is used as the host, and all

performance modes can be selected, and the auxiliary unit will be

controlled by the host to perform the same actions.

WIFI Operation mode

In the "User Settings" interface, press the ENTER button, use the

UP/DOWN button to select "Wi-Fi Mode" (WIFI mode), press the ENTER

button, the Wi-Fi icon will appear, indicating that the Wi-Fi module has

been turned on, and you can use your mobile phone at this time Set up for

connection control. Open the phone settings function, find the wireless and

network WLAN items, connect the device with the name of LED_xxx, as

shown in the figure

When the connection is successful, exit the mobile phone function settings

and open the “Led LAMP” application software, then the corresponding

mode operation can be carried out. App interface and mobile phone

operating system may be different.

DMX CHANNEL SHEET

6CH mode

Value

Function

1 0-255 Red

2 0-255 Green

3 0-255 Blue

4 0-255 White

Table des matières

Autres manuels FOS Technologies Équipement d'éclairage

FOS Technologies

FOS Technologies Pixel BladeUltra Manuel utilisateur

FOS Technologies

FOS Technologies ATLAS Tube Manuel utilisateur

FOS Technologies

FOS Technologies FOS PAR 7x10W ALU Manuel utilisateur

FOS Technologies

FOS Technologies PIXEL BAR 18 Manuel utilisateur

FOS Technologies

FOS Technologies COB PAR 200 Manuel utilisateur

FOS Technologies

FOS Technologies CYCLONE PRO D2 Manuel utilisateur

FOS Technologies

FOS Technologies VINTAGE 7 Manuel utilisateur

FOS Technologies

FOS Technologies Bar Pente Manuel utilisateur

FOS Technologies

FOS Technologies PAR 18x12WPRO RGBWA Manuel utilisateur

FOS Technologies

FOS Technologies 17R Hybrid CMY Manuel utilisateur

FOS Technologies

FOS Technologies Tour PAR 150 Manuel utilisateur

FOS Technologies

FOS Technologies PAR 18x10W Flat Manuel utilisateur

FOS Technologies

FOS Technologies Luminus Manuel utilisateur

FOS Technologies

FOS Technologies PAR 18X10WPRO IP65 Manuel utilisateur

FOS Technologies

FOS Technologies Arena Zoom Manuel utilisateur

FOS Technologies

FOS Technologies Beam 230W Hybrid Manuel utilisateur

FOS Technologies

FOS Technologies L005613 Manuel utilisateur

FOS Technologies

FOS Technologies FOS PAR 18x10W Pro Manuel utilisateur

FOS Technologies

FOS Technologies FOS GLOW II Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur