1514
Using your Fortune Radius 300
• Making calls
Lift the handset or press the handsfree key,
or, if the headset is attached, press the
headset key and wait for dial tone. Then
dial the number you require.
• Ending calls
Replace the handset or press the
handsfree button a second time, or if the
call was being made via the headset, press
the headset button.
• Receiving calls
When the phone rings, lift the handset, or
press the hands free key, or if the headset
is fitted press the headset key.
If your telephone system provides the
Caller ID service, then the telephone
number of the person calling you will be
displayed when the phone rings.
When a call is in progress the volume can
be adjusted by pressing the Vol– Vol+ or
key.
• Switching between handset, hands free
and headset mode
It is possible to start the call using the
handset, headset or hands free mode, and
to change between modes during the call.
To change between modes, just activate the
newmode, e.g. If you are using the handset
and want tochange tohands free, just
pressthe hands free button and replace
the handset, the call will automatically
transfer to hands free.
• Redial
Your Radius 300 automatically stores the
last five numbers you dialled for easy
access.
The last number you dialled can be quickly
redialled, by seizing the telephone line and
pressing Redial.
Alternatively, if you want to dial one of the
last five numbers called. When the phone is
idle, press the Redial key repeatedly until
the number you want is displayed, then
seize the telephone line by lifting the
handset, pressing hands free or if the
headset is connected, pressing the headset
button. After a short pause, the number
you want is dialled to line.
•Pause
Apause can be inserted in a dialling string
by pressing the Redial key. This will insert a
three second pause, shown as a ‘P’ on the
display.
• Calls list
Your Radius 300 will store the details of the
last30 callers in the calls list. The
information is stored in the sequence the
calls were received.
The idle display shows the number of new
calls and the number of viewed calls in the
calls list. For example the idle display:
CLIP – 05/25
Indicates you have five new calls in a list of
25 calls.
To view the caller information in the list,
press the Calls List key, the display will
show the most recent entry first, along with
the dateand time the call was received.
If the number that called you is stored in
the Radius 300’s directory with a name,
then the calls list entry will also show that
name, having looked it up in the directory.
You can step backwards and forwards
through entries in the calls list using the
/\ \/ navigation keys.
•Calling back an entry in the calls list
With the entry from the calls list shown on
the Radius 300’s display, seize the
telephone line by lifting the handset,
pressing the hands free button or if you
have a headset fitted, pressing the headset
button.
After a brief pause the telephone will dial
back the number shown on the display.
• Deleting a number from the calls list
Access the calls list and scroll to the entry
you want to delete using the /\ \/ arrows.
Then press the Del key and ‘Delete?’ will be
shown on the bottom line of the display.
Press Menu/OK to confirm the deletion and
the entry will be erased.
Press Esc. To take you back to idle
• Deleting the entire calls list:
Access the calls list, then press and hold
the delete key for two seconds, and ‘Delete
All?’ will be shown on the bottom line of
the display.
PressMenu/OK to confirm the selection.
The display will then change to ‘Sure ?’.
Pressing Menu/OK again will delete the
entirelist.
• Copying a calls list entry to the Phone
Book
You can copy a telephone number from
the calls list to the phone book on your
Radius 300.
Press the calls list key, and scroll to the
entry to be stored, and press Menu/OK to
confirm.
The display will prompt ‘Store To Book’,
press Menu/OK to confirm.
The leading digit of the telephone number
will now flash to allow you to edit the entry.
PressMenu/OK toconfirm the numeric
entry.The cursor will nowappear in the
lower line to allow the name to be entered
using the alphanumeric keypad.
For example to enter the name John:
For J, press 5 once.
For O, press 6 three times.
For H, press 4 twice.
For N, press 6 twice.
When the name has been entered press the
Menu/OK key to confirm and the display
will show Saved!
• Copying a calls list entry to a direct
Memory:
You can copy a telephone number from the
calls listto one of the direct memories on
your Radius 300.
Press the Calls List key, and scroll to the
required entry using the /\ \/ keys, or by
pressing the first character of the entry
you are looking for.
