Fortec Star PTI 1320 Manuel utilisateur

………………………………………………………

Precautions 1

Product Overview 2

Menu Functions 42

After- sales Service

APPENDIX 63

………………………………………………………………

………………………………………………………

…………………………………………… 6

……………………………

…………………………………………….…62

…………………………………………………………………

……………………

Operation Instructions

Table of Contents

PRECAUTION

- 1 -

Precaution

*Please read this manual carefully before the installations and operations.

Transportation Security

No heavy stress, violent vibration or water splash are allowed during transportation, storage. The

unit should be transported in separated packing. In shipments of distributor and delivery of

maintenance, any damages caused by integral packing are not covered by warranty.

Installation

Avoid heavy stress and violent vibration during installation. Don’t touch the dome cover directly

by hand. When connecting the power source, please follow all electric safety standards and only use

the power supply designated for this device. Keep the video and control signal in a decent distance

from high voltage devices and cable. Don’t apply power to dome before finishing the installation.

Internal Environment

Keep metal and inflammable material away from dome body to avoid fire short circuit and

damage. Please prevent all liquids material from entering the dome. If this occurs, please shut down

the power and pull out the plug-in. Then please inform the technical personnel immediately.

Electrical Safety

The video image would be interfered when the dome is installed near Television, radio transmitter,

voltage changer and audio amplifier.

Camera Protection

Avoid shooting very bright objects directly into the camera’s CCD (such as the sun or light fittings)

and avoid fixating the camera lens on bright static object for long time, as it will cause Irreparable

damage to the camera’s CCD.

Cleaning Method

Please don’t use abrasive and violent detergent to clean the dome. Please choose dry fabric and

neutral detergent. And please use lens paper to clean the lens.

*Internal removing, assembly, repair and operations should be only

performed by qualified service personnel.

Please use our production under the following environmental standards:

Environmental Temperature:

-35 ～60 ℃

Environmental Humidity:

<95％

Barometric Pressure:

86～106KPa

Power Supply:

DC12V/5A

PRODUCT OVERVIEW

- 2 -

Product Overview

Special Features

•High definition

H.264 compression algorithm, save the network bandwidth and hard disk storage space, aspect ratio of

16:9 and 4:3 adjust at will; h. 264 main profile level and M - JPEG video streaming can be output at full

frame speed. support for dynamic coding parameters adjustment

•Zoom and automatic focusing

With 20 x optical zoom, more than 20 times digital zoom and autofocus function, not only can provide

an ideal field of vision, but also can realize perfect automatic focus

•Double stream free switch

Support the double stream, choose the main stream or sub stream according to different application.

• Supported protocols

Support TCP/IP、PPPoE、DHCP、UDP、MCAST、FTP、SNMP 、Onvif、CGI、PSIA etc

•Voice intercom function

Support Voice intercom

• Alarm function

Support the local and network linkage signal; Provide area, mobile sensitivity detection alarm, regional

block alarm

Main Features

•Stepless speed changes, auto zoom/speed matching

• Pan 0.01~360o/S, Tilt 0.01o~120o/S, Preset: 360o/S (high speed IR speed dome)

• Pan 0.5o~35o, Tilt 0.5o~35o, Preset:35o/s (for Vari-speed IR dome)

• Auto object track with zoom in/out and motion detection (Auto Track Model)

•Timing actions for 7 days of programmable schedule

• Built-in Semi-conductor heater & digital temperature sensor

• PWM cooling fan vari-speed temperature control

• Reserved network interface and space for network module

• Pan Tilt accuracy +/- 0.1o, 256preset positions

• 8 cruising tracks, each cruising track has 32 presets

• 4 pattern tours,10 Mins memory, 500 programmable instructions

PRODUCT OVERVIEW

- 3 -

• Multi-Protocol through RS485 or coaxial cable.

• 8 auto scan with use-defined left and right boundaries and settable scan speed

• 8 Privacy Zones with defined English camera title

• Auto Compatible PELCO_P, PELCO_D compatible

• Guard Location: the dome will rotate back to preset position after a period of vacant time

• Alarm triggering: the alarm can trigger preset, auto scan, cruising and pattern tours functions

•Soft Address Function: the use can set up the dome address without uninstall the dome

Integrated Super Speed PTZ Rotator

• Delicate stepping motor, stable, sensitive and accurate

• 360° Pan and 90° Tilt range (auto-flip) without blind area

• Stepless speed change, auto zoom/speed matching

•Near / far IR Light auto matches camera zoom in/out

Built-in High Definition Day/Night Camera

• Auto iris, auto back light compensation

• Auto/manual white balance

• Auto/manual brightness control

• Auto/manual focus

• Multiple compatible camera brands including Sony, Samsung, LG, CNB, Sanyo etc.

All-weather Outdoor Design

•5 Inch High die-cast alloy aluminum construction

• High Precision Mould with high heat conductivity

•Fully enclosed isolation design for heat sink

• Nanometer Dustproof, waterproof and fog-proof lens

•IP66 Waterproof

•3000V lightning and surge current protection

Function Instructions

•Focus / PTZ Speed Auto Match

The pan/tilt rotation speed could be automatically adjusted according to the focus in/out, which

makes it much more practical for manual target tracking. (Only for the auto tracking IR speed dome)

•Auto Flip

When the camera tilts downward and goes just beyond the vertical position, the camera will

rotate 180 degrees.

•Preset Position Set up and Call Up

PRODUCT OVERVIEW

- 4 -

In the Preset function the dome stores the current pan/tilt angle, zoom and other position

parameters in its memory. When necessary the dome recalls these parameters and adjusts the camera

to a particular position. The user can store, recall and clear the presets easily and promptly by using

the keyboard controller. The dome can store up to 256 presets.

•Auto Scan

Users can set up the left and right boundaries by control keyboard. Then speed dome can scan

between this boundary. It supports up to 8 groups of scanning paths.

•Cruising Track

The preset position can be programmed to be recalled in a set of sequences. This sequence can be

set to let the camera scan from one position to the next in a cycle at a set speed. This feature is called

the “auto cruise”. The cruise sequence and dwell time of each preset can be set. It supports up to

8cruising tracks, each cruising track with 32 presets.

•Pattern Tour

Dome can memorize 600S running path or 500 programmable instructions. When start pattern

tour, speed dome will move automatically according recorded action path. It supports 4 groups of

pattern tours.

•3D Positioning

The dome automatically return to preset position if there is no operation in period of vacant time.

•Default Action

When you start up the dome camera or do not send commands over a long time, the dome

camera will return to its default functions which include the home place, auto pan, auto cruise and

pattern.

•Dome Address Setup

The dome supports up to 256 addresses and the dome will only response to the instructions given

to its own address. Please check the dip switch on the bottom of the dome for address setup.

•Privacy Mask Protection

Set black mask areas to protect the privacy zones. The black privacy locations can be set, and

support up to 8 mask zones.

•Coordinates and Directions Display

User can define the dome’s direction of due north, which will help to show up the exact moving

directions on screen. And zone title is supported to display when the dome moves to the specified

zone.

PRODUCT OVERVIEW

- 5 -

•Auto Tracking

The dome will automatically fix and track the moving object according to the user’s setup via OSD.

•Motion Detection

The dome will detect the changes in the defined video zone and trigger alarm.

It supports to 8 video Locations, each with 4 detection zones.

•PTZ and Lens Control

1) Zoom Control

Users can control zoom by keyboard to get near or far images.

2) Focus Control

The default setting is auto focus. The camera will auto focus based on the center of the video

display to get the clear image. In some special occasions, the user could do the manual focus to get the

desired image effect.

3) Auto Iris Control

Auto Iris is aiming to detect the environmental lights condition and adjust the iris to get the

stabilized brightness of the image.

4) Auto Back Light Compensation

In the highly bright background, auto back light compensation is aiming to compensate the

brightness of the dark object and adjust the background brightness to get a clear image.

5) Auto/Manual White Balance

Auto/Manual WB adjust depending on the environment light changes.

6) Day and Night Switch (Only for Day/Nigh Camera)

Speed dome camera can auto switch according to the environmental illumination changes.

7) OSD Setup (Only for camera with menu)

Call upon preset No.95 to enter into OSD menu setup interface. Click “Focus” to choose menu

items and click “Iris” to set menu contents.

•Alarm(optional)

The speed dome support 7 alarm input,1alarm output. Alarm input mode can be set up normally

open or normally closed.

OPERATION INSTRUCTIONS

- 6 -

Operation Instructions

Technical Data

Power Supply:

DC12V+10% 50W

Decoder:

Built-in

Manual Speed:

Pan:0.01o～360o/S, Tilt: 0.01o～120o/S (high speed)

Pan:0.01o～100o/S, Tilt:0.01o～100o/S (Vair-speed)

Preset Speed:

360 o/S (high speed) / 100o/S (Mid-speed)

Pan Angle:

360o continuous pan rotation

Tilt Angle:

90o(Auto Flip)

Number of Preset:

256

Preset Accuracy:

+0.1o

Alarm input&output:

7input,1 output

Auto Scan:

8 auto scan tracks, user-defined left and right boundaries and scan

speed

Auto Cruising:

8 cruising tracks, each cruising tracks has 32 preset positions,

user-defined dwell time

Pattern Tour:

4 patterns, up to 500 instructions per pattern

Guard Location:

The dome will rotate back to preset position after a period of vacant

time.

Operating Humidity:

0～90%

Operating Temp:

-35 oC +60oC

OPERATION INSTRUCTIONS

- 7 -

Main Functions Fast Call Up

Our IR Speed dome supports 220 preset positions. You can activate some special functions by

calling upon code number 65-99.

Serial

No.

Command

Fast Call Up

Note

Start Auto Scan

Call 99

Default to start auto scan

of group No.1

Start Auto Cruise

Call 98

Default to start auto

cruise of group No.1

Start Pattern Tour

Call 97

Default to start pattern

tour of group No.1

Start Auto Scan of Group

No.

Call 80+ Call pp+ Call 99

pp means：Group No.1-8

Start Auto Cruise of

Group No.

Call 80+ Call pp+ Call 98

Start Pattern Tour of

Group No.

Call 80+ Call pp+ Call 97

pp means：Group No.1-4

Close OSD Menu

Call 96 or Call 26

Open OSD Menu

Call 95or Call 25

Remote Reset

Call 94

Recover Factory Default

Call 82

OPERATION INSTRUCTIONS

- 8 -

General Operations

3.1 Factory Setting

Products have default network parameters as below for your reference when

leave our factory. These parameters can be changed according to your need.

IP:192.168.0.99(for customized camera, please refer to specific label instruction)

Subnet Mask:255.255.255.0

Gateway:192.168.0.1

WEB Port:8000

User computer network parameters:

For Windows XP example, Please change user computer IP address to the same

network segment with the speed dome camera before landing.Within the same

LAN,IP address can’t be the same, otherwise it will conflict, leading to equipment

can't work normally.

After setting the IP address,click ,open the command prompt, command

format is “ping192.169.0.99”.

User computer is connected to this IP camera successfully as below display.

Table des matières

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur