Fortec Star 5900 Manuel utilisateur

FORTEC STAR 5900 receiver installation guide

FORTEC STAR 5900 Digital Satellite Receivers

Dish Alignment Quick Start:

Stationary Dish Instructions:

Assemble your dish.

ount your dish on its mast. ake sure mast is 100% vertical and solid.

Calculate your Azimuth, Elevation, and LNBF Skew for your location here:

http://www.sadoun.com/Sat/Installation/Satellite-Heading-Calculator.htm

ake sure you compensate for magnetic deviation.

Turn your dish towards the correct Azimuth and hand tighten screws.

Adjust dish Elevation to correct value and hand tighten screws.

ount your LNBF on your dish and tilt the LNBF to compensate for polarization skew.

For example, if you are aiming the dish at IA5 97W:

In Columbus, OH: LNBF should be turned 16 degrees counter clockwise when

facing the dish.

Los Angeles: 30 degrees clockwise

New York: 30 degrees counter-clockwise

Connect your receiver to the LNBF using RG6 coaxial cable. ake sure the receiver is

"OFF" when you do that.

Turn your receiver "ON"

Motori ed Dish Instructions:

Assemble your dish.

Install your LNBF on your dish. Do not tilt or skew the LNBF

Follow the instructions on how to setup your motorized system:

http://www.sadoun.com/Sat/Installation/HH-mount-installation.htm

NOTE

Print these instructions for your reference

Page 1

FORTEC STAR 5900 receiver installation guide

Receiver Quick Start:

The highlight will be on "Dish" in the Channel Search menu screen (Pic 1). Click OK on the

remote.

Pic 1

The receiver is setup by default for IA5 (Telstar 5) and UNIVERSAL LNBF (Pic 2). Leave

all the settings as is.

Pic 2

Now adjust your dish alignment until you see the “Signal Quality" bar appears (Pic 2).

Note: If you don't see the Signal Quality bar that means your dish is not aligned to the

correct satellite. Only when you have a perfect alignment to the desired satellite is when

you will see the Signal Quality bar as shown in the pictures above (Pic 2). The signal

strength will always display some activity even if the dish is not aimed at the satellite

correctly.

Once you have the highest signal strength and signal quality possible, press OK on the

remote to save and go back to the previous menu.

Scroll down Automatic and click OK (Pic 1)

Select Telstar 5 by clicking on OK (Pic 3).

Page 2

FORTEC STAR 5900 receiver installation guide

Pic 3

Scroll down until you reach the "Scan Free Channels" (Pic 3) and press OK.

A new screen will show the scan progress.

When the scan is completed, the receiver will save the data and restart.

Congratulations, you just loaded your receiver!

While the installation is not difficult, it does require that you have some experience in electrical

wiring and minor construction techniques. Also, you may have to climb a ladder, so you'll want

to be comfortable working with heights. ost of our customers have successfully installed the

satellite system by themselves.

Installation of the system is entirely your responsibility. Guidelines and tips provided on

this website are intended to help you achieve a successful installation of your new satellite

system. You are advised to consult a professional installer if you need more support.

Professional Installation is recommended if you have difficulty locating and locking on your

favorite satellite. After you have purchased the satellite system, you may contact a

professional to install the system for you. There is a fee for installation. You can also look in the

local yellow pages under "satellites" for local installers in your area.

SADOUN SATELLITE SALES * http://www.sadoun.com * 888-519-9595

Page 3

Table des matières

Autres manuels Fortec Star Récepteur

Fortec Star

Fortec Star Lifetime Classic NA Manuel utilisateur

Fortec Star

Fortec Star INNOVATION Manuel utilisateur

Fortec Star

Fortec Star Lifetime Manuel utilisateur

Fortec Star

Fortec Star FSIR-5400NA Manuel utilisateur

Fortec Star

Fortec Star FS-4300 Manuel utilisateur

Fortec Star

Fortec Star Mercury II Digital FTA Manuel utilisateur

Fortec Star

Fortec Star FSCO 5600 V2 Manuel utilisateur

Fortec Star

Fortec Star FS-4000 Manuel utilisateur

Fortec Star

Fortec Star FS-4500 Manuel utilisateur

Fortec Star

Fortec Star PASSION+ Manuel utilisateur

Fortec Star

Fortec Star STATIONARY FTA system Manuel

Fortec Star

Fortec Star DVB-786v3 Manuel

Fortec Star

Fortec Star Digital Satellite Receiver Manuel utilisateur

Fortec Star

Fortec Star Lifetime Ultra Manuel utilisateur

Fortec Star

Fortec Star FS-4200 Manuel utilisateur

Fortec Star

Fortec Star FS-4300 Manuel utilisateur

Fortec Star

Fortec Star 786NA Manuel utilisateur

Fortec Star

Fortec Star Digital Satellite Receiver Manuel utilisateur

Fortec Star

Fortec Star MERCURY Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur