Formula FD40292-20 Manuel utilisateur
1
CURA retrofitting for E-Bike
Service Manual –
This manual contains informations regarding the CURA standard brake retrofitting for E-Bike.
2
Index
Important informations...............................................................................................................................................3
Parts list..........................................................................................................................................................................3
Exploded view...............................................................................................................................................................4
Required tools...............................................................................................................................................................5
Upgrade CURA E-Bike................................................................................................................................................5
3
Important informations
IMPORTANTE
Repeatedly using our products in extreme conditions requires more frequent servicing.
Using unrecommended high-pressure washing methods, using unrecommended
spare parts, solvents and lubricants not recommended by Formula reduce the life
span of our products.
IMPORTANTE
Formula recommends only ORIGINAL spare parts and lubricant products.
Formula recommends consulting servicing technicians for these activities.
INFORMAZIONI DI SICUREZZA
Always wear nitrile gloves and safety glasses when working on the shock
absorber. Ensure correct disposal of waste materials and liquids.
Parts list
Part number
Description
Position
FD40292-20
KIT UPGRADE CURA EBIKE (HIGO)
1, 2, 3, 4, 5
4
Exploded view
5
Required tools
▪Torque wrench with 3 mm tool.
▪Allen key 3 mm
▪Torx T10 key
▪Formula mineral oil
Upgrade CURA E-Bike
Procedure
Remove the oil inside the brake system using the bleeding screw on the master cylinder and on the caliper, using a
Torx T10 key. Dispose the oil correctly.
1. Remove the bleeding screw in the middle bleeding hole (6) on the master cylinder with a Torx T10 key.
2. Place the O-Ring (1) in its seat on the bleeding screw included in the kit (2). Tight the knob (3) until the end of its
stroke.
6
3. Tight the bleeding screw assembled in step 2 in the middle bleeding hole on the master cylinder. Use a torque
wrench with 3 mm tool and a torque of 2 Nm.
4. Unscrew the lever pivot (7 and 8). Remove the dust seal (9) and the seeger (10), so that the lever and the pushrod
can be removed.
7
5. Place the magnet (5) in its seat on the piston(11) without removing it from its seat. Place back the lever, inserting
the seeger and the dust seal back. To put the dust seal back use a not sharpened tool, in order to not damage the
dust seal itself. Tight the lever pivot using a torque wrench with 3 mm tool (3 Nm) and a 3 mm allen key.
6. Place the reed sensor (4) unitl it fits well.
7. Bleed the brake with Formula mineral oil. For the correct procedure, follows the video on Formula’s YouTube
Channel: Bleeding CURA.
8
https://www.rideformula.com/it/
FORMULA S.r.l.
Via Erbosa, 63 - 59100 Prato (Italia)
Tel. +39 0574 603 609
Fax +39 0574 611 046
Reg. Imprese Prato / C.F. / P.IVA 02081070977
PEC: formula-italy@legalmail.it
Cap. Soc. 500.000,00 € i.v.
The content of this document can be altered without notice. All rights reserved.
Revision 0 –July 2023
Table des matières
Autres manuels Formula Accessoires pour vélos
Formula
Formula THIRTYFIVE QR15 Manuel utilisateur
Formula
Formula 4 Racing Manuel utilisateur
Formula
Formula MD1 Manuel
Formula
Formula R1 Racing Manuel utilisateur
Formula
Formula Linea Manuel utilisateur
Formula
Formula 151239 Series Manuel utilisateur
Formula
Formula MOD Manuel utilisateur
Formula
Formula NERO R Manuel utilisateur
Formula
Formula TECH SUSPENSION TJ2 Manuel utilisateur
