Remark: When you plug in the USB key/Micro SD card before starting the device,
maybe the device can’t find the USB stick/Micro SD card. In this case, please
remove them and try again.
DVR/Micro SD RECORDING OPERATION
(Recording via MICRO SD Card is only available for the new versions)
1. Set the Screen Video Button on Video 2.
2. Take off the isolation sheet from the Remote Control Battery.
3. Press the Remote Control Button 5 to enter the Recording system, you can
see DVR system Recorder PLAY VIDEO manual on the screen.
4. Insert your USB stick/ removable hard disc etc into the USB Port, or Micro SD Card
into Micro SD Card Slot, you can see USB stick/ Micro SD Card Connected on
the screen and the LED light indicator is on.
5. Press Remote Control Button 3 to start the recording and the RECORDING
LED light is on. In recording, if you press the RECORDING button again, the DVR
will take a photo and it is saved in the USB key or Micro SD card (only available for
new versions).
6. Press Remote Control Button7 to stop recording.
7. Press Remote Control Button 1 to review recording.
8. If you need to manage your recorded pictures, press Remote Control Button 4
You can also manage the files by selecting the SETTING on PLAY VIDEO manual
on the screen.
NOTE:
DVR system sometimes need 10 - 20 seconds for reposition before it can work
properly, please let it run about 20 seconds each time when you try to record.
USB flash disk and Micro SD card max memory is 8G bit.
The recorded video files will be found in a directory of USB/Micro SD devices.
You can use the on-screen menu or press (REC) button to start recording. Press
(■/EXIT) button to stop recording. During the recording, the screen will display
recording time and time limit (up to 60 minutes).
9
Recording time limit
Sometimes you may forget to stop the recording after it is initiated. This unit is featured
with a recording time limit. The default time limit is 60 minutes. If recording time over
1 hour, the system will record with a new file
Schedule recording
You can schedule a recording in advance. Simply enable the schedule recording in the
SETUP and then the unit will ask user to setup timing. Recording schedule can be
used once. You have to set up schedule again for next recording.
Recording via USB Stick / Micro SD Card
The unit can be used to record video and voice via USB devices / Micro SD Card .The
recorded video will be stored in the USB devices / Micro SD Card and played back on
the TV screen.
Video recording format
The default video recording resolution is 640*480. One-hour recording will take up
storage of 500MB. User may select 320*240 to save storage space.
Voice recording
A microphone button located on the front panel allows the user to press the button
on to record a voice while the video is recording (This function is only available for new
versions).
Video Playing
You can use on-screen menu to enter “play video” mode. The unit will display the
recorded video and other compatible videos stored in USB stick / Micro SD Card. It
will not list the non-compatible videos.
Select the Video File.
When you enter “play video” mode, the set will display all of the available video files on the screen.
You can use [▲] or [▼] button to select desired video and press [►/ENT] button to play.
Press and hold [▲] or [▼] button to go to previous or next video.
Use [►/ENT] button to start or pause the playing .Use [■/exit] button to stop or go
back to previous menu.
The screen will display “loading, please wait …” for a few seconds before playing video.
10
