Follett Horizon Elite Manuel de service
Order parts online
www.follettice.com
Horizon Elite™Ice Machine Installation Instructions
for Ice Storage Bin Top-mount Applications
HCD/HMD/HCF/HMF1010RBT, HCD/HMD/HCF/HMF1410RBT,
HCD1010NBT, HMD1010NBT, HCD1410NBT, HMD1410NBT
(See model number congurator on page 2 for details.)
01113315R00
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
remote condensing
2remote condensing BIN • TOP-MOUNT
ConfigurationApplication
S RIDE™
(RIDE remote
ice delivery
equipment)
T Top-mount
400 up to
454 lbs
(206kg)
1000/1010
up to
1036 lbs
(471kg)
1400/1410
up to
1450 lbs
(658kg)
1650 up to
1580 lbs
(717kg)
V Vision™
H Harmony™
B Ice storage bin
J Drop-in
M Ice Manager
diverter valve
system
CondenserSeriesVoltageIcemaker
C 208-230/60/1 (icemaking head)
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote. If remote
unit, high side is 208-230/60/1.
E 230/50/1 (icemaking head)
Self-contained only.
F 115/60/1 (icemaking head)
Remote only. High side is
208-230/60/3.
MC Maestro™
Chewblet®
(400 Series)
HC Horizon
Chewblet
(1000, 1400,
1650 Series)
HM Horizon
Micro Chewblet
HC 1400C SVA
A Air-cooled, self-contained
W Water-cooled, self-contained
R Air-cooled, remote condensing unit
N Air-cooled, no condensing unit for
connection to parallel rack system
Chewblet®Ice Machine Model Number Configurations
CAUTION!
• This appliance should be connected by a qualied person in accordance with applicable codes.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
• Connect to potable water supply only.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory,
or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children should be
supervised to ensure that they do not play with the appliance.
• This appliance is intended to be used for household and similar applications such as staff kitchen areas
in shops, offices and other working environments; farm houses and by clients in hotels, motels and
other residential type environments; bed and breakfast type environments; catering and similar non-retail
applications.
• WARNING! To avoid a hazard due to instability of the appliance, it must be xed in accordance with the
instructions.
BIN • TOP-MOUNT remote condensing 3
Front cover
8
Internal connection
7
Ice transport tube
5
External connection
6
Louvered docking assembly
4
Bin preparation
3
Site preparation
2
Unpack
1
Read and complete the following 8 installation steps
4remote condensing BIN • TOP-MOUNT
Carefully unpack and inspect the contents of your Follett ice machine. 1
Unpack
7/16"
7/16"
➊ ➋
➌➍
➎ ➏
Unpack ice machine
1. 1
BIN • TOP-MOUNT remote condensing 5
Prepare the installation site. 2
Site preparation
Provide drainage, water supply and electrical power to within 6 feet (2m) of ice
machine in accordance with local and national codes. Outdoor installation is
not recommended and will void warranty.
➊
NEMA
5-15
➎3/8" ∅ (9,5mm)
➍
1'
➌
➋
1/4" per foot
(6,4 mm per 0,3 m)
5/8" ∅ (15,8 mm)
Electrical ➊
• 120/60/1-5 amps
Potable water supply ➋ (3/8” push-in internal connection, 3/8” OD tubing required)
• 10-70 psi (69-483kpa)
• 45-90 F (7-32 C)
• Follett recommends the use of an in-line water ltration system (item# 00130286)
• This equipment is to be installed with adequate backow protection to comply with applicable
federal, state, and local codes
Drain ➌ (3/4” MPT)
• The drain line from the ice machine must have at least 1/4” per foot pitch (6,4 mm/0,3 m)
Refrigeration lines ➍
• 5/8” ∅ (15,8 mm) diameter suction line (insulated) ➍
• 3/8” ∅ (9,5 mm) liquid line ➎
2.1 Installation site requirements
2.1
6remote condensing BIN • TOP-MOUNT
Prepare the bin. 3
Bin preparation
• Remove protective tape from
gaskets
Bin top preparation
3.1
➋
➊
➊
➌
• Apply gaskets ➊
• Install shuttle actuator ➋ through bin top
and secure with locking nut ➌
Bin top preparation
3.2
BIN • TOP-MOUNT remote condensing 7
Install the louvered docking assembly.
Louvered docking assembly 4
➊
➊
3/8˝ ∅
high pressure
line
1010, 1410:
5/8" ∅ low pressure line
1" (25,4 mm)
Stub Typ
1.88" (47,8 mm)
3.38" (86 mm)
2" (50,8 mm)
➋
• Mount louvered docking assembly ➊
• “Rough-in” the refrigerant piping ➋
2.1 Louvered docking assembly
4.1
8remote condensing BIN • TOP-MOUNT
Ice transport tube
Install the ice transport tube. 5
➋
➊
Hot Water
160 F (71 C)
➌
5.1
• Slide insulation onto ice transport tube
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with
pliers ➊ before making connection to ease assembly
• Connect ice transport tube to coupling on louvered docking station ➋
• Connect ice transport tube to shuttle actuator ➌
BIN • TOP-MOUNT remote condensing 9
Connect utilities to louvered docking assembly. 6
External connections
➋
➊
➌
• Remove access panel if necessary.
• Install drain line ➊.
The rigid drain line from the ice machine
must have at least 1/4" per foot pitch
(6,4mm/0,3m).
• Rough-in ice machine potable water
supply ➋.
3/8” push-in connection will be made at
shut-off valve inside machine.
• Apply Petrogel to barbed drain tting ➌
• Replace access panel.
Water and drain
6.1
➊
• Braze supplied expandable refrigerant
lines in place ➊
Refrigerant lines
6.2
10 remote condensing BIN • TOP-MOUNT
Connect louvered docking assembly to ice machine. 7
Internal connections
➊
• Braze refrigerant lines ➊
Refrigeration lines
7. 3
➊
➋
• Slide ice machine into louvered docking
assembly ensuring that drain tube is fully
seated on barbed drain tting ➊
• Insert ice transport tube all the way into
coupling and tighten nut rmly ➋
Ice transport tube installation
7. 1
➋
➊
• Insert potable water line into valve ➊
Water line
7. 2
• Remove twist tie
• Carefully pass cord thru opening and plug
into wall outlet
Power cord
7. 4
Table des matières
Autres manuels Follett Machine à glaçons
Follett
Follett Horizon Elite HCD1010R/N Manuel d'utilisation
Follett
Follett Horizon Elite HMF1010RJS Manuel utilisateur
Follett
Follett 7FS100A Guide de configuration
Follett
Follett HCE1400A Manuel d'utilisation
Follett
Follett HCD1000R Manuel d'utilisation
Follett
Follett HCC1000ABS Manuel utilisateur
Follett
Follett H58642 Manuel d'utilisation
Follett
Follett Maestro Plus MC-425A/W, Maestro Plus MF-425A/W, Maestro Plus... Guide de configuration
Follett
Follett MC-425A/W Guide de configuration
Follett
Follett C33985 Manuel d'utilisation
Follett
Follett HCE1400A Manuel d'utilisation
Follett
Follett T400A Guide de configuration
Follett
Follett Horizon Elite HMD1410N Manuel d'utilisation
Follett
Follett HCC1000AHS Manuel utilisateur
Follett
Follett Maestro Plus MCD425WBS Manuel utilisateur
Follett
Follett Horizon HCC1000ABT Manuel utilisateur
Follett
Follett HCE1000A Manuel d'utilisation
Follett
Follett Horizon Elite series Manuel utilisateur
Follett
Follett Horizon Elite Chewblet HCD1010RMS Manuel utilisateur
Follett
Follett Ice Pro EDB1000 Manuel
