Focal 914-HDE Manuel utilisateur

MOOG PROPRIETARY AND CONFIDENTIAL INFORMATION

THIS TECHNICAL DATA/DRAWING/DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO, AND IS THE EXPRESS PROPERTY OF MOOG

INC., OR MOOG INC. SUBSIDIARIES EXCEPT AS EXPRESSLY GRANTED BY CONTRACT OR BY OPERATION OF LAW AND IS RESTRICTED TO USE

BY ONLY MOOG EMPLOYEES AND OTHER PERSONS AUTHORIZED IN WRITING BY MOOG OR AS EXPRESSLY GRANTED BY CONTRACT OR BY

OPERATION OF LAW. NO PORTION OF THIS DATA/DRAWING/DOCUMENT SHALL BE REPRODUCED OR DISCLOSED OR COPIED OR FURNISHED

IN WHOLE OR IN PART TO OTHERS OR USED BY OTHERS FOR ANY PURPOSE WHATSOEVER EXCEPT AS SPECIFICALLY AUTHORIZED IN

WRITING BY MOOG INC. OR MOOG INC. SUBSIDIARY.

Focal Technologies Corporation

A Moog Inc. Company

77 Frazee Avenue

Dartmouth, Nova Scotia, Canada B3B 1Z4

Tel: (902) 468-2263 | www.moog.com/focal

Model 914-HDE User Manual

Fiber Optic

HD Video, Data and Ethernet Multiplexer

Document No.:

914-0601-00

Revision:

4.0

Author(s):

Date of Issue:

2017-07-21

Model 914-HDE User Manual

Focal Technologies Corporation ii

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

Document Revision History

Document

Revision

Details of Revision

Author(s)

Date

[yyyy-mm-dd]

Rev 1.0

Initial Release.

2016-02-01

Rev 2.0

Release of B1 and C1 firmware

Ethernet Link Fault Pass Through

Trade HD-SDI for Gigabit Ethernet

Optional input of LED Header

Maximum 350Mb/s Ethernet throughput in M1 mode

while 3G-SDI is plugged

3G-SDI Level B support

Update to colour coded diagnostic cable

2016-06-27

Rev 3.0

Added sections

7.0 Firmware Updates

8.0 Feature Upgrades

2016-10-13

Rev 4.0

Added sections

Quick Start Check List

Troubleshooting Section

VDX Expansion Card

2017-07-21

Reference Documents

Document

Number

Document Title and Description

914-2016-00

Model 914-HDE Configuration Drawing

914-0601-01

Model 914-HDE Diagnostic Protocol Manual

914-2020-00

Model 914 VDX Configuration Drawing

914-0401-00

Model 914 Diagnostic GUI

Model 914-HDE User Manual

Focal Technologies Corporation iii

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

TABLE OF CONTENTS

Introduction.....................................................................................................................................1-1

Setup Check List ............................................................................................................................2-1

System Overview............................................................................................................................3-2

3.1 914-HDE Versions..................................................................................................................3-4

3.2 Power......................................................................................................................................3-5

3.3 HD Video Channel..................................................................................................................3-6

3.4 Serial Data Ports ....................................................................................................................3-7

3.5 Ethernet Port...........................................................................................................................3-8

3.6 Diagnostic LEDs.....................................................................................................................3-9

3.7 Diagnostic LED Header........................................................................................................3-10

3.8 Optics....................................................................................................................................3-11

3.8.1 Flux Budget Calculation...........................................................................................3-11

3.8.2 Optical Safety ..........................................................................................................3-11

Model 914 Diagnostic GUI .............................................................................................................4-1

4.1 Installing the Model 914 Diagnostic GUI ................................................................................4-2

4.1.1 914-HDE Diagnostic Status Display..........................................................................4-4

4.1.2 914-HDE Serial Port Configuration ...........................................................................4-7

4.1.3 914-HDE Ethernet Port Configuration.......................................................................4-7

Expansion Cards............................................................................................................................5-1

5.1 914-VDX.................................................................................................................................5-1

5.1.1 914-VDX Serial Data Ports........................................................................................5-2

5.1.2 914-VDX Composite Video Channels .......................................................................5-1

5.1.3 914-VDX Power.........................................................................................................5-2

5.1.4 914-VDX Diagnostic LEDs ........................................................................................5-3

5.1.5 914-VDX Diagnostic LED Header .............................................................................5-4

5.1.6 914-VDX Expansion Channel Configuration .............................................................5-5

5.1.7 914-VDX Configuration..............................................................................................5-6

5.1.8 914-VDX Serial Port Configuration............................................................................5-7

5.1.9 914-VDX Diagnostics ................................................................................................5-8

5.2 914-EX (Preliminary Information)...........................................................................................5-9

5.3 914-DX (Preliminary Information)...........................................................................................5-9

5.4 Custom ...................................................................................................................................5-9

System Specification .....................................................................................................................6-1

6.1 Example 914-HDE L1 System................................................................................................6-1

6.2 Example 914-HDE M1 System...............................................................................................6-2

6.3 Example 914-HDE H1 System...............................................................................................6-2

Installation and Operation.............................................................................................................7-1

7.1 Installation...............................................................................................................................7-1

7.2 Bench Test..............................................................................................................................7-2

7.3 Electrical and Environmental Specifications...........................................................................7-3

7.4 Maintenance...........................................................................................................................7-3

Model 914-HDE User Manual

Focal Technologies Corporation iv

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

7.5 914-HDE Product Handling....................................................................................................7-4

7.6 Accessories ............................................................................................................................7-4

Firmware Updates ..........................................................................................................................8-1

8.1 Firmware Compatibility...........................................................................................................8-2

Feature Upgrades...........................................................................................................................9-1

Troubleshooting...........................................................................................................................10-2

10.1 Focal Technical Support Contact Information ......................................................................10-4

Model 914-HDE User Manual

Focal Technologies Corporation v

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

LIST OF TABLES

Table 1: 914-HDE Versions .......................................................................................................................3-4

Table 2: Power Connector Pinout..............................................................................................................3-5

Table 3: Serial Data Port Numbering.........................................................................................................3-7

Table 4: Serial Data Connector Pinout ......................................................................................................3-7

Table 5: Ethernet LEDs..............................................................................................................................3-8

Table 6: 914-HDE Diagnostic LEDs...........................................................................................................3-9

Table 7: 914-HDE Diagnostic LED Header Pinout ..................................................................................3-10

Table 8: Sample Flux Budget Calculation................................................................................................3-11

Table 9: J8 Diagnostic Connector Pinout...................................................................................................4-1

Table 10: Serial Data Port Numbering.......................................................................................................5-2

Table 11: Serial Data Connector Pinout ....................................................................................................5-2

Table 12: Power Connector Pinout............................................................................................................5-2

Table 13: 914-HDE Diagnostic LEDs.........................................................................................................5-3

Table 14: 914-HDE Diagnostic LED Header Pinout ..................................................................................5-4

Table 15: 914-VDX Expansion Channel Configuration..............................................................................5-5

Table 16: Signal Types and Required Bandwidths....................................................................................6-1

Table 17: Available Bandwidth by Card Version........................................................................................6-1

Table 18: Example 914-HDE L1 System Requirements............................................................................6-1

Table 19: Example 914-HDE L1 System Solution.....................................................................................6-1

Table 20: Example 914-HDE M1 System Requirements...........................................................................6-2

Table 21: Example 914-HDE M1 System Solution....................................................................................6-2

Table 22: Example 914-HDE H1 System Requirements...........................................................................6-2

Table 23: Example 914-HDE H1 System Solution ....................................................................................6-2

Table 24: Electrical Specification...............................................................................................................7-3

Table 25: Environmental Specification.......................................................................................................7-3

Table 26: Firmware Revisions....................................................................................................................8-2

Model 914-HDE User Manual

Focal Technologies Corporation vi

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

LIST OF FIGURES

Figure 1-1: 914-HDE Fiber Optic Multiplexer Card....................................................................................1-1

Figure 3-1: 914-HDE System Diagram......................................................................................................3-2

Figure 3-2: 914-HDE Top View..................................................................................................................3-3

Figure 3-3: Power Input Connector Location.............................................................................................3-5

Figure 3-4: Mini SMB Jack - Amphenol P/N 142146-75............................................................................3-6

Figure 3-5: Video Channel 1 Connector Location......................................................................................3-6

Figure 3-6: Molex Micro-fit P/N 43045-0800..............................................................................................3-7

Figure 3-7: Serial Ports 1 and 2.................................................................................................................3-7

Figure 3-8: Ethernet Port............................................................................................................................3-8

Figure 3-9: Diagnostic LEDs......................................................................................................................3-9

Figure 3-10: Diagnostic LED Header.......................................................................................................3-10

Figure 4-1: 914-HDE Diagnostic Interface Cable ......................................................................................4-1

Figure 4-2: 914-HDE Diagnostic Connector ..............................................................................................4-1

Figure 4-3: Diagnostic GUI Start Screen ...................................................................................................4-2

Figure 4-4: 914-HDE Card Info..................................................................................................................4-3

Figure 4-5: 914-HDE Voltage and Junction Temperature Information ......................................................4-4

Figure 4-6: 914-HDE Optical Link Status...................................................................................................4-5

Figure 4-7: 914-HDE Signal Status............................................................................................................4-6

Figure 4-8: 914-HDE Serial Port Configuration..........................................................................................4-7

Figure 4-9: 914-HDE Ethernet Settings .....................................................................................................4-7

Figure 5-1: 914-VDX..................................................................................................................................5-1

Figure 5-2: Molex Micro-fit .........................................................................................................................5-2

Figure 5-3: VDX Serial Ports......................................................................................................................5-2

Figure 5-4: Mini SMB Jack - Amphenol P/N 142146-75............................................................................5-1

Figure 5-5: Video Connector Locations .....................................................................................................5-1

Figure 5-6: Power Input Connector Location.............................................................................................5-2

Figure 5-7: VDX Diagnostic LEDs..............................................................................................................5-3

Figure 5-8: Diagnostic LED Header...........................................................................................................5-4

Figure 5-9: Diagnostic LED Header...........................................................................................................5-5

Figure 5-10: SW1 Position and Orientation ...............................................................................................5-5

Figure 5-11: 914-VDX Video Configuration ...............................................................................................5-6

Figure 5-12: 914-VDX Serial Port Configuration........................................................................................5-7

Figure 5-13: 914-VDX Voltages and Temperature ....................................................................................5-8

Figure 7-1: 914-HDE Dimensions..............................................................................................................7-1

Figure 8-1: Firmware Update GUI..............................................................................................................8-1

Figure 9-1: Feature Update Via Configuration Tool...................................................................................9-1

Model 914-HDE User Manual

Focal Technologies Corporation vii

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

ACRONYMS AND ABBREVIATIONS

The list below contains the acronyms and abbreviations used in this user's guide.

ACRONYM /

ABBREVIATION

DESCRIPTION

3 Gbps HD Video

BER

Bit Error Rate

CWDM

Coarse Wavelength Division Multiplexer / Multiplexing

Serial Data EXpansion

EIA

Electronic Industries Association

ESD

Electrostatic Discharge

Ethernet EXpansion

FORJ

Fiber Optic Rotary Joint

FPGA

Field Programmable Gate Array

GBE

Gigabit Ethernet

Gbps

Gigabits Per Second

High Definition

High Speed

HDE

HD-Video, Serial Data, Ethernet

I/O

Input/output

kbps

Kilobits Per Second

LC/PC

Lucent Connector / Physical Contact

LED

Light Emitting Diode

Low Speed

Mbps

Megabits Per Second

MDI/MDIX

Automatic medium-dependent interface crossover

Medium Speed

P/N

Part Number

PCB

Printed Circuit Board

PCBA

Printed Circuit Board Assembly

Standard Definition

SDI

Serial Digital Interface

SFP

Small Form-factor Pluggable (Optical Transceiver)

SMT

Surface Mount Technology

TDM

Time Division Multiplexer / Multiplexing

TTL

Transistor-Transistor Logic

VDX

Composite Video, Serial Data, EXpansion

VOAT

Variable Optical Attenuator

WDM

Wavelength Division Multiplexer / Multiplexing

Model 914-HDE User Manual

Focal Technologies Corporation 1-1

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

Introduction

The Focal Model 914 High Definition Video Multiplexer (914-HDE) is a compact and rugged video, data and

Ethernet multiplexer and fiber optic transmission system designed for industrial environments and other

applications requiring the transmission of HD video, data and Ethernet over an optical link. The 914-HDE has

been optimized for low power operation and delivery of low latency, uncompressed 3G/HD/SD-SDI video.

A series of expansion cards are available, allowing additional composite video channels, serial data channels,

and Ethernet ports to be added to any 914-HDE system without requiring extra fibers of wavelengths.

This manual provides 914-HDE users with detailed information relevant to the design, configuration, installation,

and operation of the 914-HDE system. This manual and the appropriate reference documents should be

reviewed prior to installation or configuration of the multiplexer system.

Figure 1-1: 914-HDE Fiber Optic Multiplexer Card

Model 914-HDE User Manual

Focal Technologies Corporation 2-1

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

Setup Check List

The purpose of this section is to provide a check list that can be followed to setup 914-HDE systems both

physically and through electronic configuration. Details regarding each step can be found in the manual via the

referenced section links.

1. Expansion cards:

a. 914-VDX: Set dip switch to appropriate setting, refer to Section 5.1.6.

i. The (bottom) card closest to the 914-HDE should be set to OFF, OFF (Expansion 1).

2. Mounting cards:

a. 4 mm minimum clearance under the 914-HDE.

b. 16.15 mm (nominal) standoffs of 2-56 type between cards.

c. Thermal gap material to provide conductive cooling to an enclosure should be placed under

the 914-HDE.

d. Refer to Section 7.1.

3. Connect console to remote via LC to LC fiber jumper. For short links, attenuation is required. 10 dB is

the suggested minimum attenuation in the fiber link. For flux budget calculations refer to Section 3.8.1.

4. Connect the diagnostic port on console 914-HDE to a local COM port of a computer running the 914

Diagnostic GUI. Refer to Section 4.0.

5. Connect the 914-HDE to a DC power supply with 5 V to 12 V power. Refer to Section 3.2. Verify all

system voltages in the 914 Diagnostic GUI.

6. Configure all cards via Diagnostic GUI:

a. Configure console HDE

i. Serial protocol. Refer to Section 4.1.2.

ii. Ethernet auto-negotiate settings. Refer to Section 4.1.3.

b. Configure console VDX

i. Remote vs console. Refer to Section 5.1.7.

ii. Video direction. Refer to Section 5.1.7.

iii. Serial protocol. Refer to Section 5.1.8.

c. Configure remote HDE

i. Serial protocol. Refer to Section 4.1.2.

ii. Ethernet auto-negotiate settings. Refer to Section 4.1.3.

d. Configure remote VDX

i. Remote vs console. Refer to Section 5.1.7.

ii. Video direction. Refer to Section 5.1.7.

iii. Serial protocol. Refer to Section 5.1.8.

e. Turn the power off, wait 10 seconds and power up again. Confirm settings using the 914

Diagnostic GUI.

7. Connect video, Ethernet and serial as required. Verify plug status and activity in the 914 Diagnostic

GUI.

a. HD Video –Refer to Section 3.3.

b. Ethernet –Refer to Section 3.5.

c. Serial Ports –Refer to Section 3.4.

d. Composite Video –Refer to Section 5.1.2.

8. Perform bench level testing to verify links. Refer to troubleshooting Section 10.0.

9. Install cards in system, ensure good thermal contact via mounting hardware, thermal gap pads, and

heat spreaders. Refer to Section 7.3.

10. Verify and monitor the FPGA and SFP temperatures and voltages during operation. All values should

remain in green.

Model 914-HDE User Manual

Focal Technologies Corporation 3-2

A Moog Inc. Company Document Number: 914-0601-00 Rev. 4.0

System Overview

914-HDE systems are used as pairs (one remote and one console) to provide a transparent HD video and data

link over optical fiber(s). The installed optical transceivers determine the maximum optical link speed, fiber type,

number of fibers (1 or 2), and link distance. The card version sets the operational bandwidth, which is

independent from the optical data rate. The optical link uses a proprietary data protocol ensuring reliable

transmission with extremely low latency using highly efficient and dynamic bandwidth utilization.

Typically, the uplink (remote to console) and downlink (console to remote) are combined on a single fiber –

multimode or singlemode (standard) –with a passive optical coupler known as a wavelength division multiplexer

(WDM). Standard systems operate with 1310 nm uplink and 1550 nm downlink wavelengths. In larger systems,

multiple 914-HDE units may be combined on a single fiber using a coarse wavelength division multiplexer

(CWDM) to take advantage of the high bandwidth of optical fiber.

Figure 3-1 illustrates an example of a 914-HDE system configuration using a standard, standalone 914-HDE,

which supports the multiplexing of one (1) 3G/HD/SD-SDI channels, two (2) bidirectional RS-232 / RS-485 /

RS-422 serial data channels and one (1) Gigabit Ethernet channel over a single optical fiber.

Note that the HD video source (e.g. from an HD camera) is connected at the remote end. The HD video output

is provided at the console end (e.g. to an HD monitor).

The expansion connector supports 6 expansion card ports: 2 low speed and 4 medium speed ports. Optional

expansion cards are detailed in Section 5.0.

The external fiber optic system includes optical components such as optical connectors and a Fiber Optic Rotary

Joint (FORJ).

Figure 3-1: 914-HDE System Diagram

Table des matières

Autres manuels Focal Multiplexeur

Focal

Focal 907 Manuel utilisateur

Manuels Multiplexeur populaires d'autres marques

Campbell

Campbell AM416 Manuel utilisateur

Paradyne

Paradyne SIM2000 Manuel utilisateur

Panasonic

Panasonic WJFS616 - SWITCHER Manuel utilisateur

Lanex

Lanex TM-77 Manuel utilisateur

Bosch

Bosch VSS8394/01T Manuel utilisateur

Quark-Elec

Quark-Elec QK-A035 Manuel utilisateur

ADTRAN

ADTRAN Frameport 768 Manuel utilisateur

Elo TouchSystems

Elo TouchSystems E247 Manuel utilisateur

Paradyne

Paradyne Hotwire 8786 Manuel utilisateur

RFL Electronics

RFL Electronics 9508D UCC Manuel utilisateur

Miranda

Miranda AMX-101i Mode d’emploi

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Manuel utilisateur

GE StoreSafe SDVR-10 Manuel utilisateur

Pickering

Pickering 40-613 Manuel utilisateur

Pickering

Pickering 40-667C Manuel utilisateur

American Fibertek

American Fibertek MTX-8410C Manuel utilisateur

ADC

ADC HiGain ELU-319 5E Manuel utilisateur

Paradyne

Paradyne Hotwire 8774 Manuel utilisateur