Fnirsi GC-01 Manuel utilisateur
GC-01
Nuclear Radiation
Detector User Manual
CATALOG
Notice to user
01
1. Product Description
01
2.Key features
01
3.Product parameters
02
4.The button description
03
5. How to operate
03
6. Conversion of radioactive units
07
7.NOTE
08
8. Instrument maintenance
09
9.Production information
09
This product uses a Geiger-Miller counter.Counter for detecting the
intensity of ionizing radiation (beta particles, gamma rays and
x-rays).Use a gas tube or a small chamber as a probe.When the voltage
applied to the probe reaches a certain range.Each time the ray is ionized
in the tube to produce a pair of ions, it can be amplified to produce an
electric pulse of the same size.And recorded by the connected electronic
device.The number of rays per unit time thus measured.The alarm
threshold measurement rate can be arbitrarily selected.
1. Product Description
●Please read this instruction manual and operation instructions
carefully,Follow the instructions in the manual,In order to make the
detector function fully.
●Please keep this manual
●Dont use this equipment in a flammable and explosive environment.
●Replaced used batteries and discarded instruments cannot be
disposed of with household waste.Please handle according to relevant
national or local laws.
●When there are any quality problems with the instrument or
questions about using the instrument.You can contact "FNIRSI" online
customer service or the manufacturer.We will solve it for you as soon as
possible.
Notice to user
●Detect x ray，γ rays and β rays.
●High sensitivity, can be used in various environments.
●Data is saved during shutdown.
●High-definition LCD display.The status display is clear at a glance.
2.Key features
01
3.Product parameters
●Light/Vibration/Sound 3 combined alarm modes to choose.
●Real-time clock display.
●The product can preset dose rate and cumulative dose alarm
threshold.
Product name
Size
Types of detection rays
dose equivalent rate
Energy range
Language
Sensitivity
Dosage unit
Power supply
Alarm method
Cumulative
dose equivalent
Detector
Nuclear radiation detector
120x78x27mm
γ rays, x rays, β rays
0.00-1000μSv/h（10mSv/h）
48keV-1.5Mev≤±30% (for 137Cs-)
Chinese/English switch
80CPM/μSv（For Co-60）
μSv/h,μGy/h,mR/h,cps,cpm Switch
1100mAh lithium battery
light, vibration, sound
Energy Compensation GM Tube
(Geiger Counter Meter)
0.00μSv-500.0mSv
02
4.The button description
5. How to operate
●Left/Back key: Return to the upper
menu from the lower menu
●Right key/setting key: Enter the
setting menu/enter the lower menu
●Power on/off key/OK key: Switch
on/Off/Confirm
●Up key: Switch options up and down
●Down key: Switch options up and
down
Short press the power button to turn it on.Long press the power
button to shut down.
①Power on/off
03
Automatically enter this
page after booting, and
monitor parameters:
●Real-time detection amount,
displayed in the upper left panel
●Average value/Maximum value
●Current dose alarm value
●Cumulative dose alarm value
●Cumulative stored dose rate
Press the left and right keys
to switch to the waveform
detection page as follows:
●Waveform monitoring
●Current dose rate real-time value
●Maximum value
●Minimum
Setting Options:
●Unit settings
●Alarm settings
●System clock
●Alarm mode
●Display settings
Long press the right key/setting key to enter the setting
menu.Long press the left button/back button on the setting page
to return to the monitoring page.Press the up and down keys to
switch the setting options.
②Monitoring interface
③ Settings
04
Press the right button to
enter the lower level to set
five measurement units:
●μSv/h
●μGy/h
●mR/h
●CPS
●CPM
3.1 Unit setting
●Current dose alarm value
● Cumulative dose alarm value
●The accumulated dose is reset
to zero
Long press the right key/setting key to enter the setting
menu.Press the up and down keys to switch the setting
options.Press the right button to enter the lower settings to
set or change the values of the following options:
3.2 Alarm settings
05
Long press the right key/setting key
to enter the setting menu.Press the
up and down keys to switch the
setting options.Press the right
button to enter the lower level
settings to set the date and time.
3.3 System Clock
Long press the right key/setting key
to enter the setting menu.Press the
up and down keys to switch the
setting options.Press the right
button to enter the lower level
settings.On or off:
●Indicator
●Vibration
●Sound
3.4 Alarm mode
Long press the right key/setting key
to enter the setting menu.Press the
up and down keys to switch the
setting options.Press the right
button to enter the lower settings:
●Screen brightness adjustment
●Switch between Chinese/English
3.5 Display Settings
06
Radioactive staff: 20mSv/year (10μSv/hour)
General public: 1mSv/year (0.52μSv/hour)
6. Conversion of radioactive units
①International Standards (1990)
1μSv/h=100μR/h 1nc/kg.h=4μR/h
1μR=1γ(The unit used for prospecting in the pronuclear industry)
Radioactivity:
1Ci=1000mCi
1mCi=1000μci
1Ci=3.7×1010Bq =37GBq
1mCi=3.7×107Bq =37MBq
1μCi=3.7×104Bq=37KBq
1Bq=2.703×10-11Ci=27.03pci
Exposure:
1R=103mR=106μR
1R=2.58×10-4c/kg
Absorption metering:
1Gy=103mGy=106μGy
1Gy=100rad 100μrad=1μGy
Metering equivalent:
1Sv=103mSv=106μSv
1Sv=100rem 100μrem=1μSv
Other:
1Sv is equivalent to 1Gy 1g radium=0.97Ci≈1Ci
Radon unit:
1Bq/L=0.27em=0.27×10-10Ci/L
②Unit conversion
07
Radon unit:
1Bq/L=0.27em=0.27×10-10Ci/L
7.NOTE
A=A0eλ-t t=T1/2 ；
A0 The known source strength A is how much time has elapsed,According
to the radioactive decay calculation table look-up table calculation.
The intensity of the radioactive source is inversely proportional to
the square of the distance.
X=A.г/R2A: The activity of the point source;R: Distance from source;
г: Exposure rate constant
Note: Ra-226 (t 1608) г=0.825 ren. m2/hour. Curie
Cs—137 (t 29.9 years) г= 0.33 ren. m2/hour. Curie
Co—60 (t 5.23 years) г=1.32 ren. m2/hour. Curie
Nuclear radiation detectors are sophisticated instruments.Please be
careful.The following recommendations will facilitate instrument mainte-
nance and prolong life.
According to the radioactive decay calculation table, look
up the table to calculate the radioactive shielding:
③Calculation of radioisotope decay values
④The relationship between radioactive source and distance
Radioactive
source
Cesium-137
Iridium-192
Cobalt-60
Halving
0.65
0.55
1.10
1/10
2.2
1.9
4.0
Halving
1.6
1.3
2.0
1/10
5.4
4.3
6.7
Halving
4.9
4.3
6.3
1/10
16.3
14.0
20.3
Pencil Iron Concrete
Halved and reduced to 1/10 value (cm) for different substances
08
Table des matières
Autres manuels Fnirsi Capteur de sécurité
