Fluke 8062A Manuel utilisateur

This manual pertains to instruments with serial number 6830XXX

or higher.

8062A

True-rms Multimeter

Instruction Manual

PN 609153

May 1997 Rev.1, 1/00

All product names are trademarks of their respective companies.

LIMITED WARRANTY & LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship

under normal use and service. The warranty period is one year and begins on the

date of shipment. Parts, product repairs and services are warranted for 90 days. This

warranty extends only to the original buyer or end-user customer of a Fluke authorized

reseller, and does not apply to fuses, disposable batteries or to any product which, in

Fluke’s opinion, has been misused, altered, neglected or damaged by accident or

abnormal conditions of operation or handling. Fluke warrants that software will oper-

ate substantially in accordance with its functional specifications for 90 days and that it

has been properly recorded on non-defective media. Fluke does not warrant that

software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to

end-user customers only but have no authority to extend a greater or different warranty

on behalf of Fluke. Warranty support is available if product is purchased through a

Fluke authorized sales outlet or Buyer has paid the applicable international price.

Fluke reserves the right to invoice Buyer for importation costs of repair/replacement

parts when product purchased in one country is submitted for repair in another coun-

try.

Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase price,

free of charge repair, or replacement of a defective product which is returned to a

Fluke authorized service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center or

send the product, with a description of the difficulty, postage and insurance prepaid

(FOB Destination), to the nearest Fluke authorized service center. Fluke assumes no

risk for damage in transit. Following warranty repair, the product will be returned to

Buyer, transportation prepaid (FOB Destination). If Fluke determines that the failure

was caused by misuse, alteration, accident or abnormal condition of operation or han-

dling, Fluke will provide an estimate of repair costs and obtain authorization before

commencing the work. Following repair, the product will be returned to the Buyer

transportation prepaid and the Buyer will be billed for the repair and return transporta-

tion charges (FOB Shipping Point).

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU

OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, IN-

CLUDING LOSS OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY

OR BASED ON CONTRACT, TORT, RELIANCE OR ANY OTHER THEORY.

Since some countries or states do not allow limitation of the term of an implied war-

ranty, or exclusion or limitation of incidental or consequential damages, the limitations

and exclusions of this warranty may not apply to every buyer. If any provision of this

Warranty is held invalid or unenforceable by a court of competent jurisdiction, such

holding will not affect the validity or enforceability of any other provision.

Fluke Corporation Fluke Europe B.V.

P.O. Box 9090 P.O. Box 1186

Everett, WA 98206-9090 5602 BD Eindhoven

U.S.A. The Netherlands

5/94

Safety Information

This meter has been designed and tested in accordance with IEC Publication

348. To ensure that the meter is used safely, follow all safety and operating

instructions in this manual. If the meter is not used as described in this man-

ual, the safety features of the meter might be impaired.

•Do not use the meter if the meter or test leads look damaged, or if you

suspect that the meter is not operating properly.

•Turn off power to the circuit under test before cutting, unsoldering, or

breaking the circuit. Small amounts of current can be dangerous.

•Do not apply more than 500V rms between a terminal and earth ground.

•Use caution when working above 60V dc or 30V ac rms. Such voltages

pose a shock hazard.

•When using the probes, keep your fingers behind the finger guards on

the probes.

•Disconnect the live test lead before disconnecting the common test lead.

Symbols

The following international symbols are used in this manual:

Important Safety Information in Manual

Diode Test

Ground

Fuse

Indicates Terminals At Which Dangerous Voltages May Exist

Battery

Table of Contents

Chapter Title Page

1 Introduction and Specifications............................................ 1-1

1-1. Introduction ............................................................................. 1-3

1-2. Specifications........................................................................... 1-4

2 Operation Instructions........................................................... 2-1

2-1. Introduction ............................................................................. 2-3

2-2. Unpacking Your Instrument..................................................... 2-3

2-3. Battery Installation or Replacement......................................... 2-3

2-4. Fuse Replacement.................................................................... 2-5

2-5. Physical Features ..................................................................... 2-6

2-6. Front Panel........................................................................... 2-6

2-7. Display................................................................................. 2-8

2-8. Signal Input Limits .................................................................. 2-9

2-9. Operation ................................................................................. 2-10

2-10. Power-On Self-Test.............................................................. 2-10

2-11. AC/DC Voltage (V)............................................................. 2-11

2-12. True RMS Measurement.................................................. 2-11

2-13. AC-Coupled AC Measurements....................................... 2-12

2-14. Waveform Comparison and Conversion.......................... 2-13

2-15. High Impedance DC Voltage........................................... 2-14

2-16. AC/DC Current (A).............................................................. 2-15

2-17. Resistance (Ω)...................................................................... 2-18

2-18. Autoranging Megohms..................................................... 2-19

2-19. Autoranging Kilohms....................................................... 2-20

2-20. Diode Test (G)................................................................... 2-21

2-21. Relative (REL)..................................................................... 2-22

2-22. Continuity ( )........................................................... 2-25

2-23. Initial Check-Out Procedure.................................................... 2-25

3 Theory of Operation............................................................... 3-1

3-1. Introduction ............................................................................. 3-3

3-2. Functional Description............................................................. 3-3

3-3. Microcomputer..................................................................... 3-3

3-4. Measurement Acquisition Chip (MAC)............................... 3-5

3-5. A/D Converter Cycle............................................................ 3-5

3-6. Voltage Measurement.......................................................... 3-8

8062A

Instruction Manual

3-7. Current Measurement .......................................................... 3-9

3-8. Resistance Measurement...................................................... 3-10

3-9. Continuity Measurement ..................................................... 3-11

4 Maintenance............................................................................ 4-1

4-1. Introduction............................................................................. 4-3

4-2. Service Information................................................................. 4-3

4-3. General Information ................................................................ 4-5

4-4. Handling Precautions for Using Static Sensitive Devices ... 4-5

4-5. Disassembly and Reassembly.............................................. 4-5

4-6. Calibration and Backup Fuse Access............................... 4-6

4-7. Main PCB Access............................................................ 4-7

4-8. LCD and Microcomputer PCB Disassembly and

Assembly......................................................................... 4-8

4-9. Backup Fuse Replacement................................................... 4-11

4-10. Cleaning............................................................................... 4-11

4-11. Performance Tests ................................................................... 4-12

4-12. Initial Procedure.................................................................. 4-12

4-13. Microcomputer and Display Test......................................... 4-12

4-14. Voltage Test......................................................................... 4-13

4-15. Resistance Test.................................................................... 4-14

4-16. Continuity Test.................................................................... 4-15

4-17. Current Test......................................................................... 4-15

4-18. Diode Test ........................................................................... 4-17

4-19. Calibration Adjustments.......................................................... 4-17

4-20. Troubleshooting....................................................................... 4-19

4-21. Self-Tests............................................................................. 4-19

4-22. Ratio Self-Test................................................................. 4-19

4-23. Switch Decoding Self-Test.............................................. 4-20

4-24. Troubleshooting Guide........................................................ 4-21

5 List of Replaceable Parts....................................................... 5-1

5-1. Introduction............................................................................. 5-3

5-2. How to Obtain Parts ................................................................ 5-3

5-3. Manual Status Information...................................................... 5-4

5-4. Newer Instruments................................................................... 5-4

5-5. Service Centers........................................................................ 5-4

6 Accessory Information .......................................................... 6-1

6-1. Introduction............................................................................. 6-3

6-2. Deluxe Carrying Case (C90).................................................... 6-3

6-3. Temperature Probes (80T-150C and 80T-150F)..................... 6-3

6-4. Current Transformer (80I-600)................................................ 6-6

6-5. High Voltage Probe (80K-6)................................................... 6-6

6-6. High Voltage Probe (80K-40)................................................. 6-7

6-7. High Frequency Probe (83RF) ................................................ 6-7

6-8. High Frequency Probe (85RF) ................................................ 6-8

6-9. Current Shunt (80J-10)............................................................ 6-9

6-10. AC/DC Current Probe (Y8100)............................................... 6-9

Contents

(continued)

iii

6-11. AC Current Transformer (Y8101)............................................ 6-10

6-12. Safety Designed Test Lead Set (TL70).................................... 6-11

6-13. Deluxe Test Lead Set (Y8134)................................................. 6-11

6-14. Slim Flex Test Lead Set (Y8140)............................................. 6-12

6-15. Cables and Adapters ................................................................ 6-12

7 Schematic Diagrams.............................................................. 7-1

8062A

Instruction Manual

List of Tables

Table Title Page

1-1. 8062A Accessories................................................................... 1-4

1-2. 8062A Specifications............................................................... 1-5

2-1. Controls, Indicators and Connectors........................................ 2-7

2-2. Input Overload Limits.............................................................. 2-9

2-3. Resistance Function Autoranges and Resolution..................... 2-19

3-1. Voltage Input Divider.............................................................. 3-9

4-1. Required Test Equipment ........................................................ 4-4

4-2. Voltage Test............................................................................. 4-13

4-3. Resistance Test......................................................................... 4-15

4-4. Current Test ............................................................................. 4-16

4-5. Switch Decoding Self-Test ...................................................... 4-21

4-6. Troubleshooting Guide............................................................ 4-22

4-7. Troubleshooting the Resistance Function: Voltage Sources

for Ranges................................................................................ 4-26

4-8. U3 (MAC) Pin Descriptions.................................................... 4-26

5-1. 8062A Final Assembly............................................................. 5-5

5-2. A1 Main PCB Assembly.......................................................... 5-9

5-3. A3 RMS PCB Assembly.......................................................... 5-13

6-1. Cables and BNC, Banana, Phone and Phono Plug Adapters... 6-12

8062A

Instruction Manual

Table des matières

Autres manuels Fluke Multimètre

Fluke

Fluke 8808A/SU Manuel utilisateur

Fluke

Fluke 707 Instructions d'installation et d'utilisation

Fluke

Fluke 374 Manuel d'utilisation et d'entretien

Fluke

Fluke 113 Manuel d'utilisation et d'entretien

Fluke

Fluke 175 Manuel utilisateur

Fluke

Fluke 8860A Manuel utilisateur

Fluke

Fluke 87 III Series Instructions d'utilisation et d'installation

Fluke

Fluke 175 Manuel d'utilisation et d'entretien

Fluke

Fluke 80 Series III Instructions d'utilisation et d'installation

Fluke

Fluke 113 Manuel utilisateur

Fluke

Fluke 365 Manuel d'utilisation et d'entretien

Fluke

Fluke 175 Manuel utilisateur

Fluke

Fluke 8508A Manuel utilisateur

Fluke

Fluke 110 Manuel utilisateur

Fluke

Fluke 28IIEX Manuel utilisateur

Fluke

Fluke CNX 3000 Manuel d'utilisation et d'entretien

Fluke

Fluke 175 Manuel utilisateur

Fluke

Fluke 27/FM Manuel utilisateur

Fluke

Fluke 112 Manuel utilisateur

Fluke

Fluke 113 Manuel utilisateur

Fluke

Fluke 77 Manuel utilisateur

Fluke

Fluke 106 Manuel utilisateur

Fluke

Fluke Biomedical MPS450 Operators Manuel utilisateur

Fluke

Fluke 110 Manuel d'utilisation et d'entretien

Manuels Multimètre populaires d'autres marques

Agilent Technologies

Agilent Technologies 34420A Manuel utilisateur

Hameg

Hameg HM 8012 Manuel utilisateur

Mastech

Mastech MY70 Manuel utilisateur

Steren

Steren MUL-300 Manuel utilisateur

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuel utilisateur

PeakTech

PeakTech 4000 Manuel d'utilisation et d'entretien

YOKOGAWA

YOKOGAWA 90050B Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuel utilisateur

Tempo Communications

Tempo Communications MM200 Manuel utilisateur

Elenco Electronics

Elenco Electronics CM-1555 Manuel utilisateur

Mastech

Mastech MS8238C Manuel utilisateur

SDAR

SDAR 830A, 830B, 830D, 830C Manuel utilisateur

RS PRO

RS PRO RS-9519BT Manuel utilisateur

BGS technic

BGS technic 8890 Manuel utilisateur

Amprobe

Amprobe Hexagon 60 Manuel utilisateur

Morris

Morris 57074 Manuel utilisateur

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Manuel utilisateur