Fluke ProSim 4 Manuel utilisateur
PN 3931478
January 2011, Rev. 3, 2/15
© 2011-2015 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
ProSim™4
Vital Signs Simulator
Getting Started
Warranty and Product Support
Fluke Biomedical warrants this instrument against defects in materials and workmanship for one year from the date of
original purchase OR two years if at the end of your first year you send the instrument to a Fluke Biomedical service center
for calibration. You will be charged our customary fee for such calibration. During the warranty period, we will repair or at our
option replace, at no charge, a product that proves to be defective, provided you return the product, shipping prepaid, to
Fluke Biomedical. This warranty covers the original purchaser only and is not transferable. The warranty does not apply if the
product has been damaged by accident or misuse or has been serviced or modified by anyone other than an authorized
Fluke Biomedical service facility. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
This warranty covers only serialized products and their accessory items that bear a distinct serial number tag. Recalibration
of instruments is not covered under the warranty.
This warranty gives you specific legal rights and you may also have other rights that vary in different jurisdictions. Since
some jurisdictions do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you. If any provision of this warranty is held invalid or unenforceable by a court or
other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
7/07
Notices
All Rights Reserved
Copyright 2015, Fluke Biomedical. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language without the written permission of Fluke Biomedical.
Copyright Release
Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed materials for use in service
training programs and other technical publications. If you would like other reproductions or distributions, submit a written request to
Fluke Biomedical.
Unpacking and Inspection
Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage is found, stop unpacking
the instrument. Notify the carrier and ask for an agent to be present while the instrument is unpacked. There are no special unpacking
instructions, but be careful not to damage the instrument when unpacking it. Inspect the instrument for physical damage such as bent or
broken parts, dents, or scratches.
Technical Support
For application support or answers to technical questions, either email techservices@flukebiomedical.com or call 1-800-850-4608 or
1-440-248-9300. In Europe, email techsupport.emea@flukebiomedical.com or call +31-40-2965314.
Claims
Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found, retain all packing materials in
their original condition and contact the carrier immediately to file a claim. If the instrument is delivered in good physical condition but does not
operate within specifications, or if there are any other problems not caused by shipping damage, please contact Fluke Biomedical or your local
sales representative.
Returns and Repairs
Return Procedure
All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factory location. When you return an
instrument to Fluke Biomedical, we recommend using United Parcel Service, Federal Express, or Air Parcel Post. We also recommend that
you insure your shipment for its actual replacement cost. Fluke Biomedical will not be responsible for lost shipments or instruments that are
received in damaged condition due to improper packaging or handling.
Use the original carton and packaging material for shipment. If they are not available, we recommend the following guide for repackaging:
Use a double–walled carton of sufficient strength for the weight being shipped.
Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all projecting parts.
Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the instrument.
Returns for partial refund/credit:
Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number, obtained from our Order
Entry Group at 1-440-498-2560.
Repair and calibration:
To find the nearest service center, go to www.flukebiomedical.com/service or
In the U.S.A.:
Cleveland Calibration Lab
Tel: 1-800-850-4608 x2564
Everett Calibration Lab
Tel: 1-888-99 FLUKE (1-888-993-5853)
In Europe, Middle East, and Africa:
Eindhoven Calibration Lab
Tel: +31-40-2675300
In Asia:
Everett Calibration Lab
Tel: +425-446-6945
To ensure the accuracy of the Product is maintained at a high level, Fluke Biomedical recommends the product be calibrated at least
once every 12 months. Calibration must be done by qualified personnel. Contact your local Fluke Biomedical representative for
calibration.
Certification
This instrument was thoroughly tested and inspected. It was found to meet Fluke Biomedical’s manufacturing specifications when it was
shipped from the factory. Calibration measurements are traceable to the National Institute of Standards and Technology (NIST). Devices for
which there are no NIST calibration standards are measured against in-house performance standards using accepted test procedures.
WARNING
Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards or improper
operation. Fluke Biomedical will not be responsible for any injuries sustained due to unauthorized equipment modifications.
Restrictions and Liabilities
Information in this document is subject to change and does not represent a commitment by Fluke Biomedical. Changes made to the
information in this document will be incorporated in new editions of the publication. No responsibility is assumed by Fluke Biomedical
for the use or reliability of software or equipment that is not supplied by Fluke Biomedical, or by its affiliated dealers.
Manufacturing Location
The ProSim4 is manufactured at Fluke Biomedical, 6920 Seaway Blvd., Everett, WA, U.S.A.
i
Table of Contents
Title Page
Introduction .................................................................................................................... 1
Intended Use.................................................................................................................. 1
Safety Information .......................................................................................................... 2
Symbols ......................................................................................................................... 3
Unpack the Product........................................................................................................ 3
Accessories.................................................................................................................... 4
Instrument Familiarization .............................................................................................. 6
How to Turn On the Product........................................................................................... 10
How to Change the Display Language ........................................................................... 10
Maintenance................................................................................................................... 11
How to Clean the Product.......................................................................................... 12
Battery Maintenance.................................................................................................. 13
How to Charge the Battery ................................................................................... 13
Battery Removal ................................................................................................... 15
General Specifications ................................................................................................... 16
ProSim™ 4
Getting Started
ii
Detailed Specifications .................................................................................................. 17
Normal-Sinus-Rhythm Waveform ............................................................................. 17
Arrhythmia ................................................................................................................ 17
ECG-Performance-Testing ....................................................................................... 18
Respiration................................................................................................................ 18
Invasive Blood Pressure ........................................................................................... 19
Non-Invasive Blood Pressure.................................................................................... 19
Presets and Autosequences ..................................................................................... 20
iii
List of Tables
Table Title Page
1. Simulation Types................................................................................................................... 1
2. Symbols................................................................................................................................. 3
3. Standard Accessories ........................................................................................................... 4
4. Optional Accessories............................................................................................................. 5
5. Product Controls and Connections........................................................................................ 7
6. Display Features ................................................................................................................... 9
ProSim™ 4
Getting Started
iv
Table des matières
Autres manuels Fluke Équipement de laboratoire
Fluke
Fluke ii900 Guide de démarrage rapide
Fluke
Fluke RSE600 Manuel utilisateur
Fluke
Fluke TIP900 Manuel utilisateur
Fluke
Fluke SV600 Series Manuel utilisateur
Fluke
Fluke Ti450 PRO Manuel utilisateur
Fluke
Fluke Hart Scientific 7100 Manuel utilisateur
Fluke
Fluke TiX620 Manuel utilisateur
Fluke
Fluke 6050H Manuel utilisateur
Fluke
Fluke TiR4 Manuel utilisateur
Fluke
Fluke tix640 Manuel utilisateur
Fluke
Fluke PTi120 Manuel utilisateur
Fluke
Fluke Ti200 Manuel utilisateur
Fluke
Fluke Expert Series Manuel utilisateur
Fluke
Fluke TiX500 Manuel utilisateur
Fluke
Fluke 6102 Manuel utilisateur
Fluke
Fluke ii900 Manuel utilisateur
Fluke
Fluke FlexCam Manuel utilisateur
Fluke
Fluke 7108 Manuel utilisateur
Fluke
Fluke 7037 Manuel utilisateur
Fluke
Fluke Ti90 Manuel utilisateur
Manuels Équipement de laboratoire populaires d'autres marques
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuel utilisateur
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuel utilisateur
NI
NI PXI-5422 Manuel
Collomix
Collomix Aqix Manuel utilisateur
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur
Ocean Insight
Ocean Insight FLAME-NIR+ Manuel utilisateur
