Fluidwell F193-X Manuel utilisateur

F193-X

MODBUS SLAVE DISPLAY

Signal input: Modbus RTU / ASCII

Signal outputs: 4-20mA and switch outputs

Option: Intrinsically Safe

F-Series - Field mounted indicators for safe and hazardous areas. More info: www.fluidwell.com/fseries

HF193XEN_v0501_04

Page 2

SAFETY INSTRUCTIONS

Any responsibility is lapsed if the instructions and procedures as described in this

manual are not followed.

LIFE SUPPORT APPLICATIONS: The F193-X is not designed for use in life support

appliances, devices, or systems where malfunction of the product can reasonably be

expected to result in a personal injury. Customers using or selling these products for use

in such applications do so at their own risk and agree to fully indemnify the manufacturer

and supplier for any damages resulting from such improper use or sale.

Electro static discharge does inflict irreparable damage to electronics! Before installing

or opening the unit, the installer has to discharge himself by touching a well-grounded

object.

This unit must be installed in accordance with the EMC guidelines (Electro Magnetic

Compatibility).

Do connect a proper grounding to the aluminum casing as indicated if the F193-X has

been supplied with the 115-230V AC power-supply type PM. The green / yellow wire

between the back-casing and removable terminal-block may never be removed.

Intrinsically Safe applications: follow the instructions as mentioned in Chapter 5 and

consult “Fluidwell F1..-..-XI - Documentation for Intrinsic Safety”.

DISPOSAL

At the end of its life this product should be disposed of according to local regulations regarding

waste electronic equipment. If a battery is present in this product it should be disposed of

separately. The separate collection and recycling of your waste equipment will help to conserve

natural resources and ensure that it is recycled in a manner that protects the environment.

SAFETY RULES AND PRECAUTIONARY MEASURES

The manufacturer accepts no responsibility whatsoever if the following safety rules and

precautions instructions and the procedures as described in this manual are not followed.

Modifications of the F193-X implemented without preceding written consent from the

manufacturer, will result in the immediate termination of product liability and warranty period.

Installation, use, maintenance and servicing of this equipment must be carried out by authorized

technicians.

Check the mains voltage and information on the manufacturer's plate before installing the unit.

Check all connections, settings and technical specifications of the various peripheral devices

with the F193-X supplied.

Open the casing only if all leads are free of potential.

Never touch the electronic components (ESD sensitivity).

Never expose the system to heavier conditions than allowed according to the casing

classification (see manufacture's plate and chapter 4.2.).

If the operator detects errors or dangers, or disagrees with the safety precautions taken, then

inform the owner or principal responsible.

The local labor and safety laws and regulations must be adhered to.

HF193XEN_v0501_04

Page 3

ABOUT THE OPERATION MANUAL

This operation manual is divided into two main sections:

The daily use of the unit is described in chapter 2 "Operation". This instruction is meant for

users.

The following chapters and appendices are exclusively meant for electricians/technicians. These

provide an extensive description of all software settings and installing the hardware.

This operation manual describes the standard unit as well as most of the options available. For

additional information, please contact your supplier.

A hazardous situation may occur if the F193-X is not used for the purpose it was designed for

or is used incorrectly. Please carefully note the information in this operating manual

indicated by the pictograms:

A "warning" indicates actions or procedures which, if not performed correctly, may lead to

personal injury, a safety hazard or destruction of the F193-X or connected instruments.

A "caution" indicates actions or procedures which, if not performed correctly, may lead to

personal injury or incorrect function of the F193-X or connected instruments.

A "note" indicates actions or procedures which, if not performed correctly, may indirectly

affect operation or may lead to an instrument response which is not planned.

Hardware version : 02.01.xx

Software version : 02.05.xx

Manual : HF193XEN_v0501_04

Information in this manual is subject to change without prior notice. The

manufacturer is not responsible for mistakes in this material or for incidental

damage caused as a direct or indirect result of the delivery, performance or

use of this material.

in any form or by any means without written permission of your supplier.

HF193XEN_v0501_04

Page 4

CONTENTS MANUAL

Safety instructions ........................................................................................................................................... 2

Disposal .................................................................................................................................................... 2

Safety rules and precautionary measures ....................................................................................................... 2

About the operation manual ............................................................................................................................ 3

Contents manual.............................................................................................................................................. 4

1. Introduction ................................................................................................................................. 5

1.1. System description of the F193-X.......................................................................................... 5

2. Operational.................................................................................................................................. 7

2.1. General .................................................................................................................................. 7

2.2. Control panel.......................................................................................................................... 7

2.3. Operator information and functions ....................................................................................... 8

3. Configuration............................................................................................................................... 9

3.1. Introduction ............................................................................................................................ 9

3.2. Programming SETUP-level.................................................................................................... 9

3.2.1. General .................................................................................................................................. 9

3.2.2. Overview functions SETUP level ......................................................................................... 12

3.2.3. Explanation SETUP-functions.............................................................................................. 13

1 - Configure ................................................................................................................... 13

2 - Unit ............................................................................................................................ 14

3 - Decimals .................................................................................................................... 14

4 - Outputs ...................................................................................................................... 14

5 - Value.......................................................................................................................... 15

6 - Alarm set.................................................................................................................... 15

7 - Relay output............................................................................................................... 15

8 - Power management .................................................................................................. 16

9 - Analog output............................................................................................................. 16

A - Communication (optional) ......................................................................................... 18

B - Others........................................................................................................................ 18

3.2.4. Additional communication functions .................................................................................... 19

4. Installation ................................................................................................................................. 20

4.1. General directions................................................................................................................ 20

4.2. Installation / surrounding conditions .................................................................................... 20

4.3. Dimensions- Enclosure ........................................................................................................ 21

4.4. Installing the hardware......................................................................................................... 23

4.4.1. Introduction .......................................................................................................................... 23

4.4.2. Terminal connectors.................................................................................................................. 24

5. Intrinsically safe applications..................................................................................................... 30

5.1. General information and instructions ................................................................................... 30

5.2. Terminal connectors Intrinsically Safe applications ............................................................. 31

5.3. Configuration examples Intrinsically Safe applications........................................................ 33

5.4 Battery replacement instructions.......................................................................................... 35

6. Maintenance.............................................................................................................................. 36

6.1. General directions................................................................................................................ 36

Appendix A: Technical specification .............................................................................................................. 37

Appendix B: Problem solving......................................................................................................................... 39

Index of this manual....................................................................................................................................... 40

List of figures in this manual .......................................................................................................................... 40

Notes .................................................................................................................................................. 41

HF193XEN_v0501_04

Page 5

1. INTRODUCTION

1.1. SYSTEM DESCRIPTION OF THE F193-X

Functions and features

The Modbus slave display model F193-X is a microprocessor driven instrument designed as local

Modbus display with outputs which are controlled though communications as well. In total nine

different product values can be displayed, maximum four alarm switch outputs and one analog

output can be controlled.

This product has been designed with a focus on:

ultra-low power consumption to allow long-life battery powered applications (type PB / PC),

intrinsic safety for use in hazardous applications (type XI),

several mounting possibilities with aluminum or GRP enclosures for harsh industrial

surroundings,

transmitting possibilities with analog / control and communication outputs.

Communication input

This manual describes the unit with a ASCII / RTU Modbus protocol input through a RS232 / RS485

(2-wire or 4 wire). No additional inputs are available, all data is coming through the communication.

Standard outputs

Alarm output: up to four outputs can be controlled through the communication and in the mean

time a alarm message can be displayed.

(0)4-20mA / 0-10V analog output: any value within it’s range can be transmitted through

communication. The minimum and maximum signal output levels can be tuned.

For security reasons, it is also possible to enable and disable all outputs locally through the

keyboard of the F193-X.

Fig. 1: Typical application for the F193-X.

Overview typical application F193-X

(0)4-20mA

0-10V

output

RS232/RS485

Modbus

(option)

R1:

alarm output

R2:

alarm output

R3:

alarm output

R4:

alarm output

HF193XEN_v0501_04

Page 6

Configuration of the unit

The F193-X is designed to be implemented in many types of applications. For that reason, a

SETUP-level is available to configure your F193-X according to your specific requirements. SETUP

includes several important features, such as communication speed, address, measurement units

etc. All these settings can be modified through the communication as well.

All setting as are stored in EEPROM memory and will not get lost in case of power break-down or

empty battery.

To extend the battery-life time (option), please make use of the power-management functions as

described in chapter 3.2.3.

Display information

The unit has a large transflective LCD with all kinds of symbols and digits to display measuring units,

status information and key-word messages.

Options

Following options are available: isolated or active 4-20mA / 0-10V / 0-20mA analog output, full

Modbus communication RS232/485 (also battery powered), intrinsic safety, mechanic relay or active

outputs, power-supply options, panel-mount, wall-mount and weather-proof enclosures, flame proof

enclosure.

HF193XEN_v0501_04

Page 7

2. OPERATIONAL

2.1. GENERAL

The F193-X may only be operated by personnel who are authorized and trained by the

operator of the facility. All instructions in this manual are to be observed.

Take careful notice of the " Safety rules, instructions and precautionary measures " in

the front of this manual.

This chapter describes the daily use of the F193-X. This instruction is meant for users / operators.

2.2. CONTROL PANEL

The following keys are available:

Fig. 2: Control Panel.

Functions of the keys

This key is used to program and save new values or settings.

It is also used to get access to SETUP-level; please read chapter 3.

This key is used to SELECT other products or tanks.

The arrow-key is used to increase a value after PROG has been pressed

or to configure the unit; please read chapter 3.

Press this key to CLEAR an alarm.

The arrow-key is used to select a digit after PROG has been pressed or to

configure the unit; please read chapter 3.

HF193XEN_v0501_04

Page 8

2.3. OPERATOR INFORMATION AND FUNCTIONS

In general, the F193-X will always act at Operator level. The information displayed is dependant up

on the SETUP-settings. The screen refresh rate setting might be slow but after pressing a key, the

display will be updated very quickly during a 30 second period, after which it will slow-down again.

Fig. 3: Example of display information during process.

For the Operator, the following functions are available:

Display products

This is the main display information of the F193-X. After selecting any other information, it will

always return to this main display automatically.

depending on the configuration settings, it is allowed to select one or more different products

or the display will toggle automatically through all available product information.

Clear alarm

In case an alarm is generated, it can simply be cleared by pressing the CLEAR button twice. It

might however be that initialization is not possible and no other products can be selected due

to configuration settings.

Low-battery alarm

When the battery voltage drops, it must be replaced. At first "low-battery" will flash, but as

soon as it is displayed continuously, the battery MUST be replaced shortly after!

Only original batteries supplied by the manufacturer may be used, else the guarantee and

liability will be terminated. The remaining lifetime after the first moment of indication is

generally several days up to some weeks.

Alarm 01-03

When "alarm" is displayed, please consult Appendix B: problem solving.

RUN

HF193XEN_v0501_04

Page 9

3. CONFIGURATION

3.1. INTRODUCTION

This and the following chapters are exclusively meant for electricians and non-operators. In these,

an extensive description of all software settings and hardware connections are provided.

Mounting, electrical installation, start-up and maintenance of the instrument may only

be carried out by trained personnel authorized by the operator of the facility. Personnel

must read and understand this Operating Manual before carrying out its instructions.

The F193-X may only be operated by personnel who are authorized and trained by the

operator of the facility. All instructions in this manual are to be observed.

Ensure that the measuring system is correctly wired up according to the wiring

diagrams. The housing may only be opened by trained personnel.

Take careful notice of the " Safety rules, instructions and precautionary measures " in

the front of this manual.

3.2. PROGRAMMING SETUP-LEVEL

3.2.1. GENERAL

Configuration of the F193-X is done at SETUP-level. SETUP-level is reached by pressing the

PROG/ENTER key for 7 seconds; at which time, both arrows will be displayed. In order to return

to the operator level, PROG will have to be pressed for three seconds. Alternatively, if no keys are

pressed for 2 minutes, the unit will exit SETUP automatically.

SETUP can be reached at all times while the F193-X remains fully operational.

Note: A password may be required to enter SETUP. Without this password access to SETUP is

denied.

To enter SETUP-level:

HF193XEN_v0501_04

Page 10

Matrix structure SETUP-level:

SCROLLING THROUGH SETUP-LEVEL

Selection function-group and function:

SETUP is divided into several function groups and functions.

Each function has a unique number, which is displayed below the word "SETUP" at the bottom of

the display. The number is a combination of two figures. The first figure indicates the function-group

and the second figure the function. Additionally, each function is expressed with a keyword.

After selecting a sub-function, the next main function is selected after scrolling through all "active"

sub-functions (e.g. 1, 11, 12, 13, 14, 1, 2, 3, 31 etc.).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fluidwell Moniteur

Fluidwell

Fluidwell F118-P Manuel utilisateur

Fluidwell

Fluidwell F Series Manuel utilisateur

Fluidwell

Fluidwell D Series Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation