Protection of the environment
Disposal of packaging and product
Comply with the current regulations on sorted waste disposal.
Sites exposed to ionizing radiations
If the product has been exposed to ionizing radiations, implement the necessary safety measures for the
protection of people. If the product needs to be despatched, inform the carrier and the recipient accordingly,
so that appropriate safety measures can be put in place.
Spare parts
When contacting Flowtech to request technical information or spare parts, always indicate the product type
and code.
Product warranty
For information on the warranty refer to the documentation of the sale contract.
Transportation and Storage
Packaging inspection
1. Check that quantity, descriptions and product codes match the order.
2. Check the packaging for any damage or missing components.
3. In case of immediately detectable damage or missing parts:
• Accept the goods with reserve, indicating any findings on the transport document, or
• Reject the goods, indicating the reason on the transport document.
• In both cases, promptly contact Flowtech from whom the product was purchased.
Unpacking and inspection of the unit
1. Remove packing materials from the product.
2. Release the product by removing the screws and/or cuing the straps, if fied.
CAUTION: Cut and abrasion hazard
Always wear personal protective equipment.
3. Check the product for integrity and to make sure that there are no missing components.
4. In case of damage or missing components, promptly contact Flowtech.
Unit handling
The unit must be harnessed and lied as shown in Figure 1.
• The product and its components may be heavy: risk of crushing
• Always wear personal protective equipment
• Manual handling of the product and its components must be in compliance with the current
regulations on “manual load handling”, to avoid unfavourable ergonomic conditions causing
• risks of back-spine injury.
• Use cranes, ropes, liing straps, hooks and clasps that comply with current regulations and that are
suitable for the specific use
• Make sure that the harnessing does not damage the unit
• During the liing operations, always avoid sudden movements that could compromise the stability of
the load
• During handling, make sure to avoid injury to people and animals, and/or damage to property.
flowcon VSD - G Inverter
7
