effective units every 5 seconds.
B - Dynamic display：Display the working state of each unit in
real time, dynamically display the monitoring result. It also has
an alarm function. If a bottle appears red (alarm signal), the
responding unit‟s bottle is absent. Please check the production
line.In the stop condition, you can click the bottle to
enter the parameter setting interface.
a - When the unit is on dispensing mode, you can click the bottle
to enter the parameter check interface, and fine-tune the flow
rate online.
b - When the unit is in transferring mode, you can click the bottle to
enter the parameter setting interface.In this condition,you
can only change the flow rate, speed,and direction.Other
parameters can‟t be modified.
c - If the unit is not the effective unit, it will highlight errors when
clicking the bottle.
C - Choose Looping units：Click to choose the unit displaying
in the “D” area.
D - Parameter display：This area will loop display the system settings
of the effective units every 5 seconds. Click the lock sign in
the upper right corner to lock the current unit and stop loop
display.
E - Date/Time display：Displays the Date/Time in real-time.
Click to set the parameters.
F - Settingsbutton: Click this button to enter the
settingsinterface.You can select the effective unit, common
mode, and the external control settings.
G - Full speed button：Click this button to enter the full speed
interface.
H - Start/stop selection area：This area can stop or start the
working unit.
3 - Settingsinterface
PDS II
