FLIR DM90 Manuel utilisateur

USER MANUAL

FLIR MODEL DM90

True RMS Industrial Multimeter

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

Table of Contents

1. ADVISORIES 4

1.1 Copyright 4

1.2 Quality Assurance 4

1.3 Documentation 4

1.4 Disposal of Electronic Waste 4

2. SAFETY 4

3. INTRODUCTION 6

3.1 Key Features 6

4. METER DESCRIPTION 7

4.1 Front and Back Descriptions 7

4.2 Function Switch Positions 8

4.3 Function Buttons and Selector/Navigation Pad 9

4.3.1 MODE Button Operation 9

4.3.2 Selector/Navigation Pad Operation 10

4.4 Display Description 10

4.5 Display Icons and Indicators 11

4.5.1 Probe Detection Alert 12

4.5.2 Out-of-range warning 12

4.6 Menu Icon Bar 13

5.OPERATION 14

5.1 Powering the Meter 14

5.1.1 Auto Power Off (APO) 14

5.2 Auto/Manual Range Mode 14

5.3 Voltage and Frequency Measurements 15

5.4 Resistance Measurements 16

5.5 Continuity Test 16

5.6 Classic Diode Test 17

5.7 Smart Diode Test 18

5.8 Capacitance Measurements 19

5.9 Type K Temperature Measurements 20

5.10 Current and Frequency Measurements 20

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

5.10.1 Test Lead Current Measurements (A, mA, and µA) 21

5.10.2 FLEX Clamp Adaptor Current Measurements 24

5.11 Non-Contact Voltage Detector 25

5.12 Mode Icons and the Menu Bar 26

5.12.1 Selecting Modes using the Mode Menu Bar 26

5.12.2 VFD Mode (ACV and ACA only) 26

5.12.3 Peak Mode (ACV and ACA only) 26

5.12.4 Min/Max/Avg Mode 26

5.12.5 Frequency mode (ACV and ACA only) 27

5.12.6 Relative mode 27

5.12.7 Settings Menu 27

5.13 Data Hold and Auto Hold 28

5.13.1 Data Hold Mode 28

5.13.2 Auto Hold Mode 28

6. MAINTENANCE 29

6.1 Cleaning and Storage 29

6.2 Battery Replacement 29

6.3 Fuse Replacement 29

6.4 Disposal of Electronic Waste 29

7. SPECIFICATIONS 30

7.1 General specifications 30

7.2 Electrical Range Specifications 31

8. TECHNICAL SUPPORT 36

9. WARRANTY 37

9.1 FLIR Global Limited Lifetime Warranty 37

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

1. Advisories

1.1 Copyright

including source code may be reproduced, transmitted, transcribed or translated into

any language or computer language in any form or by any means, electronic, magnetic,

optical, manual or otherwise, without the prior written permission of FLIR Systems.

The documentation must not, in whole or part, be copied, photocopied, reproduced,

translated or transmitted to any electronic medium or machine readable form without

prior consent, in writing, from FLIR Systems.

Names and marks appearing on the products herein are either registered trademarks or

trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or

company names referenced herein are used for identification only and are the property

of their respective owners.

1.2 Quality Assurance

The Quality Management System under which these products are developed and

manufactured has been certified in accordance with the ISO 9001 standard.

FLIR Systems is committed to a policy of continuous development; therefore, we reserve

the right to make changes and improvements on any of the products without prior

notice.

1.3 Documentation

To access the latest manuals and notifications, go to the Download tab at:

. It only takes a few minutes to register online. In the download

area you will also find the latest releases of manuals for our other products, as well as

manuals for our historical and obsolete products.

1.4 Disposal of Electronic Waste

As with most electronic products, this equipment must be disposed of in an

environmentally friendly way, and in accordance with existing regulations for

electronic waste.

Please contact your FLIR Systems representative for more details.

2. Safety

Safety Notes

 Before operating the device, you must read, understand, and follow all instructions,

dangers, warnings, cautions, and notes.

 FLIR Systems reserves the right to discontinue models, parts or accessories, and other

items, or to change specifications at any time without prior notice.

 Remove the batteries if the device is not to be used for an extended period of time.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

Warning Statements

 Do not operate the device if you do not have the correct knowledge. Incorrect operation

of the device can cause damage, shock, injury or death to persons.

 Do not start a measuring procedure before you have set the function switch to the

correct position. Failure to do so can cause damage to the instrument and can cause

injury to persons.

 Do not change to the resistance mode when measuring voltage. This can cause damage

to the instrument and can cause injury to persons.

 Do not measure the current on a circuit when the voltage increases to more than 1000 V.

This can cause damage to the instrument and can cause injury to persons.

 You must disconnect the test leads from the circuit under test before you change the

range. Failure to observe this warning can damage the instrument and cause bodily

injury.

 Do not replace the batteries before you remove the test leads. This can cause damage to

the instrument and can cause injury to persons.

 Do not use the device if the test leads and/or the device show signs of damage. Injury to

persons can occur.

 Be careful performing measurements if the voltages are > 25 VAC rms or 35 VDC. There is

a risk of shock from these voltages. Injury to persons can occur.

 Do not do diode, resistance or continuity tests before you have removed the power from

capacitors and other devices under test. Injury to persons can occur.

 Be careful when performing voltage checks on electrical outlets. These checks are

difficult because of the uncertainty of the connection to the recessed electrical contacts.

You must not rely solely on this this device when determining if the terminals are not

“live”. There is a risk of electrical shock. Injury to person can occur.

 Do not touch expired/damaged batteries without gloves. Injury to persons can occur.

 Do not cause a short circuit of the batteries. This can cause damage to the instrument

and can cause injury to persons.

 Do not put the batteries into a fire. Injury to persons can occur.

Cautions

Do not use the device in a manner not specified by the manufacturer. This can cause damage to

the protection provided.

This symbol, adjacent to another symbol or terminal, indicates that the user

must refer to the user manual for further information.

This symbol, adjacent to a terminal, indicates that, under normal use, hazardous

voltages may be present.

Double insulation.

UL listing is not an indication or a verification of the accuracy of the meter

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

3. Introduction

Thank you for selecting the FLIR DM90 True RMS Digital MultiMeter with Type-K

thermocouple and work light features. The DM90 can measure voltage up to 1000V

AC/DC and includes Low-Z (low impedance), VFD (low pass filter), Non-Contact Voltage

Detector, and Smart/Classic Diode modes. This device is shipped fully tested and

calibrated and, with proper use, will provide years of reliable service.

3.1 Key Features

 6000 count 2.8” digital LCD display with bargraph

 Measures Voltage, Current (A, mA, µA), Frequency, Resistance/Continuity,

Diode, Capacitance, Non-Contact Voltage, and Temperature

 Customizable via easy-to-use Settings menu

 Automatic and Manual ranging

 Input over-voltage warning

 MIN-MAX-AVG memory

 PEAK MIN and PEAK MAX

 Flex Clamp direct input

 On-screen programming menu navigation

 CLASSIC and SMART Diode modes

 Variable-frequency drive VFD mode (low-pass filter)

 Low-Z (low impedance) mode

 Relative mode

 Data Hold and Auto Hold

 Auto Power OFF

 Safety Category Rating: CAT IV-600V, CAT III-1000V

 Equipped with batteries, test leads, alligator clips, test lead storage attachment,

Type-K thermocouple, and Quick Start Reference Guide.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

4. Meter Description

4.1 Front and Back Descriptions

Fig. 4-1 Front View

1. Work Light and NCV Detector

2. LCD Display

3. Navigation/OK buttons

4. MODE Button

5. RANGE Button

6. Work light Button

7. Rotary Function Switch

8. Positive (+) Probe Input Jack for A(Current).

9. Positive (+) Probe Input Jack for mA

(Current).

10. COM (-) Probe Input Jack

11. Positive (+) Probe Input Jack for all inputs

except Aand mA

12. Display Backlight Button

13. Cancel/Return Button

14. Display HOLD Button

1. Test Lead holder attachment mounts

2. Tripod mount (test lead holder attaches here

also)

3. Tilt Stand (Battery Compartment located

beneath the stand)

Fig. 4-2 Rear View

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

4.2 Function Switch Positions

Detect AC voltage through the non-contact sensor at the top of the meter.

Measure voltage through the probe inputs with a low-impedance load

positioned across the inputs that stabilizes the measurement.

Meter is switched OFF and in full power-saving mode.

FLEX Direct: Auxiliary channel for use with optional Flexible Current clamp or

standard clamp adaptors when > 600A measurements are required. In this

mode, the meter will display true rms ACA measurements from the connected

device. Frequency (Hz) can be displayed by pressing the MODE button.

Measure AC voltage (V) through the probe inputs.

Measure DC voltage (V) through the probe inputs.

Measure low voltage (mV) through the probe inputs. Use the MODE button to

select AC/DC voltage.

Measure temperature through the probe inputs using a thermocouple

adaptor. Use the MODE button to select Temperature (see Section 5.12.7,

Settings Menu, to select °C or °F as the default unit).

Measure resistance, continuity, capacitance, or diode through the probe

inputs. Use the MODE button to select the desired function.

Measure current through the probe inputs (A or mA). Use the MODE button to

select AC or DC.

Measure µA current through the probe inputs. Use the MODE button to select

AC or DC.

Fig. 4-3 Function Switch

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

4.3 Function Buttons and Selector/Navigation Pad

Use to select a sub-function of the primary function. See Section 4.3.1, MODE

Button Operation, for details.

From Auto range mode, press to select Manual range mode.

From Manual range mode, press < 1 second to change the range (scale). Press

> 1 second to activate Auto range mode

Press to toggle between Hold mode and normal display mode. Use the Settings

menu (see Section 5.12.7, Settings Menu) to select Data hold or Auto hold.

Use the selector/navigation pad to enable extended functionality modes and

to navigate mode menu options.

Press to cancel/exit a screen in the Settings menu (no function in the normal

mode).

Press to enable/disable the display backlight. The display backlight is ON when

the meter is powered up.

Press to enable/disable the work light.

4.3.1 MODE Button Operation

Switch Position

MODE button sequence of operation

AC → DC → °F or °C

Resistance → Continuity → Capacitance → Diode

AC → DC

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FLIR DM90 USER MANUAL Document Identifier: DM90-en-US_AA

4.3.2 Selector/Navigation Pad Operation

There are five (5) ‘soft’ Function buttons arranged in a square, as shown in Figure 4-4.

The function of these buttons changes, depending on the menu-driven sub-function

selected.

Fig. 4-4 Selector Navigation Pad

Pressing the OK button (center) selects a menu-driven option. The OK button is also

used to enter deeper sub-menus of selection screens.

The LEFT/RIGHT buttons:

In normal mode, the left/right buttons are used to move the menu cursor

In Settings mode, the left/right buttons are used to change the value of an option

The UP/DOWN buttons:

In normal mode, the up/down buttons have no function

In Settings mode, the up/down buttons are used to change an option.

4.4 Display Description

Fig. 4-5 Display Icons

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Autres manuels pour DM90

Table des matières

Autres manuels FLIR Multimètre

FLIR

FLIR DM91 Manuel utilisateur

FLIR

FLIR DM284 Manuel utilisateur

FLIR

FLIR Extech Instruments MN15 Manuel utilisateur

FLIR

FLIR Extech Instruments MN16 Manuel utilisateur

FLIR

FLIR EXTECH INSTRUMENTS DM110 Manuel utilisateur

FLIR

FLIR Extech Instruments 410 Manuel utilisateur

FLIR

FLIR DM6 Series Manuel utilisateur

FLIR

FLIR DM286 Manuel utilisateur

FLIR

FLIR MR160 Manuel utilisateur

FLIR

FLIR CM83 Manuel utilisateur

FLIR

FLIR IM75 Manuel utilisateur

FLIR

FLIR Extech EX510 Manuel utilisateur

FLIR

FLIR DM93 Manuel utilisateur

FLIR

FLIR DM284 Manuel utilisateur

FLIR

FLIR Extech Instruments 380941 Manuel utilisateur

FLIR

FLIR Extech Instruments MultiMaster MM560A Manuel utilisateur

FLIR

FLIR EXTECH INSTRUMENTS EX520 Manuel utilisateur

FLIR

FLIR DM90 Manuel utilisateur

FLIR

FLIR DM93 Manuel utilisateur

FLIR

FLIR DM93 Manuel utilisateur

FLIR

FLIR DM284 Manuel utilisateur

FLIR

FLIR Extech Instruments MG302 Manuel utilisateur

FLIR

FLIR DM90 Manuel utilisateur

FLIR

FLIR Extech 470 Manuel utilisateur

Manuels Multimètre populaires d'autres marques

Agilent Technologies

Agilent Technologies 34420A Manuel utilisateur

Fluke

Fluke 83 Manuel utilisateur

Hameg

Hameg HM 8012 Manuel utilisateur

Mastech

Mastech MY70 Manuel utilisateur

Steren

Steren MUL-300 Manuel utilisateur

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuel utilisateur

PeakTech

PeakTech 4000 Manuel d'utilisation et d'entretien

YOKOGAWA

YOKOGAWA 90050B Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuel utilisateur

Fluke

Fluke 8846A Manuel d'utilisation et d'entretien

Tempo Communications

Tempo Communications MM200 Manuel utilisateur

Elenco Electronics

Elenco Electronics CM-1555 Manuel utilisateur

Mastech

Mastech MS8238C Manuel utilisateur

SDAR

SDAR 830A, 830B, 830D, 830C Manuel utilisateur

RS PRO

RS PRO RS-9519BT Manuel utilisateur

BGS technic

BGS technic 8890 Manuel utilisateur

Amprobe

Amprobe Hexagon 60 Manuel utilisateur