Flight Light L810 Manuel
MWI-05-039 – Rev. B
Installation and Maintenance Manual
Steady Burning Red Obstruction Light
FAA Type L810LED Night Vision Compatible
•Tel: 800.806.3548 (USA) or 1.916.394.2800
•www.flightlight.com
•2708 47
th
Avenue, Sacramento, CA 95822-3806
MWI-05-039 – Rev. B
MWI-05-039 – Rev. B
Table of Contents
1. Introduction .......................................................................................................................................... 1
1.1 About the manual ................................................................................................................................ 1
2. Safety Measures .................................................................................................................................... 2
3. Installation ............................................................................................................................................ 3
3.1Wirin Dia ram .................................................................................................................................... 3
3.2 Sin le Head Obstruction Li hts ........................................................................................................... 4
3.2.1 Sin le Head Obstruction Li ht with Photocell ............................................................................. 4
3.2.2 Mountin Options: ....................................................................................................................... 5
3.3 Dual Head Obstruction Li ht ............................................................................................................... 6
3.3.1 Dual Head Obstruction Li ht with Photocell ................................................................................ 6
3.3.2 Dual Head Obstruction Li ht with Flasher and Photocell ............................................................ 6
3.3.3 Dual Head Obstruction Li ht with Transfer Relay ........................................................................ 7
3.3.4 Dual Head Obstruction Li ht with Transfer Relay and Photocell ................................................. 7
3.3.2 Mountin Options: ....................................................................................................................... 8
4. Replacement Parts .................................................................................................................................... 9
5. Maintenance and Repair ..................................................................................................................... 11
6. Limited Warranty ................................................................................................................................ 12
MWI-05-039 – Rev. B
1
1. Introduction
The Flight Light model L810 NVG compatible obstruction light provides an LED-based solution
to the FAA style of steady burning red obstruction light. The product complies completely with
FAA Advisory Circular AC 150/5345-43J and FAA EB-67D and is certified to these latest
standards.
Input Voltage: 100-277VAC, 12-48VDC
Power Consumption for lights with IR: 3.4W for DC and 4W for AC
The light output wavelengths: Red 615nm, Infrared (IR) 860 nm
Applicable Specifications: FAA AC 150/5345-43J plus FAA supplemental requirements for
LED light source EB-67
Operating Temperature Range: 55 to +55 Celsius; -67 to +131 Fahrenheit
Humidity: to 95% relative humidity
Wind: Wind speeds up 150 mph
Wind Blown Rain: Exposure to wind-blown rain from any direction
Salt Fog: Exposure to salt-laden atmosphere
The installation and maintenance should be done by authorized personnel only.
For questions or guidance during the installation process, please contact our office. Our
engineers and technicians are always available to help you.
Phone number: 1-800-806-3548 (USA)
1-916-394-2800
1.1 About the manual
This manual contains important information regarding the safety, operation, and maintenance of
this product. Before using the product, read and understand all cautions warning, instructions, and
product labels. Failure to do so could result in injury and/or void the warranty.
MWI-05-039 – Rev. B
2
2. Safety Measures
You must know whether your lighting system is powered by AC or DC before installing the
fixture. AC models work on a range of 100 to 277VAC and DC models operate from 12 to
48VDC. The lights are designed to be installed in a parallel circuit, which maintains a constant
voltage and brightness for all lights.
Ensure power is off before installing or servicing lighting fixtures!
Follow the local electrical code!
Make sure the equipment is rated and approved for the environment in which you are intending
to use it. Do not operate this equipment in humid, flammable, or explosive environments unless
it has been rated for safe operation in these environments.
Use only electrical wire of sufficient gauge and insulation to handle the rated current and voltage
demand.
Route electrical wiring along a protected path. Make sure they will not be damaged by moving
equipment.
Protect components from harsh environment conditions.
Protect equipment with safety devices as specified by applicable safety regulations.
Before starting this equipment, check all safety interlocks, fire –detection systems, and protective
devices such as panels and covers. Make sure all devices are fully functional. Do not operate the
system if these devices are not working properly.
Never operate equipment with a known malfunction.
Do not attempt to operate or service electrical equipment if standing water is present.
Do not touch exposed electrical connections on equipment while the power is ON!
Wiring and electrical design should be authorized by an electrical contractor.
To provide maximum protection from surges, ensure that the system ground is tested and
provides less than 25 ohms to ground resistance.
MWI-05-039 – Rev. B
3
3. Installation
The FAA has published guide specifications for the installation and maintenance of obstruction
lighting products. FAA advisory circulars may be obtained by direct internet access or by
contacting FAA.
Direct Internet Access:
https://www.faa.gov/documentLibrary/media/Advisory_Circular/AC_70_7460-
1L_with_chg_1.pdf
FAA AC 70/7460-1L
The installation of a new complete L810 LED light is similar to that of an incandescent light
source assembly.
1. Verify that all supply power is off
2. Use the below wiring diagram and ensure your incoming power is matching the voltage
the light was built for.
3. Connect the wires from the fixture to the wires from the power source
4. Make sure the connection is done in a protected, waterproof enclosure.
3.1 Wiring Diagram
MWI-05-039 – Rev. B
4
3.2 Single Head Obstruction ights
3.2.1 Single Head Obstruction ight with Photocell
Height: 9”
Width: 5.75”
Weight: 3.30 Lbs
Height: 9”
Width: 10.5”
Weight: 4.10 Lbs
MWI-05-039 – Rev. B
5
3.2.2 Mounting Options:
A. Low Surface Mount
1. Mount box to surface
2. Install fittings or conduit using sealing compound on threads.
3. Pull supply wires into box.
4. Thread the light into the cover and run the wires through the top hole and through the gasket.
See picture below. Connect/Splice them to the incoming power cables.
5. Attach system ground wire under head of green screw in box.
6. Center cover gasket evenly. Locate pre-perforated holes in the gasket and install the gasket
so they align with the mounting holes in the box. Install cover with the two screws provided.
7. Use caulking around cover.
8. Cover the conduits that are not used with the plugs provided.
MWI-05-039 – Rev. B
6
3.3 Dual Head Obstruction ight
3.3.1 Dual Head Obstruction ight with Photocell
3.3.2 Dual Head Obstruction ight with Flasher and Photocell
Height: 9”
Width: 11”
Weight: 6.55 Lbs
Height: 15 ½”
Width: 11”
Weight: 10.20 Lbs
MWI-05-039 – Rev. B
7
3.3.3 Dual Head Obstruction ight with Transfer Relay
3.3.4 Dual Head Obstruction ight with Transfer Relay and Photocell
Height: 14”
Width: 11”
Weight: 10.50 Lbs
Height: 14”
Width: 11”
Weight: 11.25 Lbs
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Flight Light Équipement d'éclairage
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
