Safety
Created by EBCCW 00:06
1
X65 System
1 Safety
The machine has been designed in such a way, that it can be used and
maintained in a safe way. This holds for the application, the circumstances
and the instructions described in the manual. Any person working with or
on this machine should study the manual and follow the instructions. It is
the responsibility of the employer to make sure that the employee is famil-
iar with and follows these instructions.
The company or the country in which the machine is used may require ex-
tra safety measures. This particularly applies to the working conditions.
This manual does not describe how these are to be complied with. In case
of doubt, consult your government or safety officer!
1.1 System information
The project number and/or general drawing number shall always be speci-
fied when communicating with FlexLink with respect to the machine.
1.2 Important safety conditions
At the moment that the machine is going to be operated by a user, the fol-
lowing safety conditions must be met:
• Make sure that children or animals have no access to the machine
and its surrounding area by, for example, screening off the ma-
chine with a fence.
• Only persons who have read and understood the operating in-
structions are allowed to operate, maintain and clean the ma-
chine.
• Do not reach into the machine while it is running or on. Even if the
machine is not running, it can be ‘on’, which means start operating
automatically.
• Safety provisions, such as side plating, bottom plating, emergen-
cy stops and detectors may not be removed or deactivated while
the machine is running.
• Provide good ambient lighting to enable the operator to work well
and orderly with the machine.
