Fleetminder MDVR-IP4/IP8 HD Manuel utilisateur

Operating Instruction for

FM MDVR-IP4/IP8 HD MDVR

Dear users, functional setting of this device requires

some expertise. Therefore, please carefully read and

fully understand the instruction before use.

Thank you for choosing our product. Difference between models or product upgrading may

result in appearance or features different from those described in the instruction; thus, it

all depends on the actual product or you can contact the manufacturer. Information

contained herein is subject to irregular change without prior notice.

This instruction is applicable for FM MDVR-IP4/IP8 HD series MDVR products. Information contained herein

may not be technically accurate. If any conflict between the product and the instruction is found during usage, it

all depends on the actual product or you can contact the manufacturer. Information contained herein is subject to

irregular change without prior notice.

1. Installation Environment

To extend the service life, please try to install the device in a place where vibration is weak;

To ensure normal heat dissipation, do not install the device in a poorly-ventilated area (such as trunk), and

also keep about 15 cm away from other objects on the same level;

The device shall be horizontally installed and protected against water, humidity and lightning; in addition,

keep the vehicle still during installation to prevent damage to the device due to falling off;

To ensure safe operation, keep the device, camera, cables and other accessories out of reach of passengers

and driver.

2. Avoid Electric Shock and Fire

8V-36V DC power supply is used for this device. Please note the positive and negative terminals during

connection to prevent short circuit;

Please power the device off before connecting any peripheral ;

Do not touch the power supply and the device with wet hands;

Do not spray liquid on the device to prevent internal short circuit or fire;

Do not place any other device directly on top of the camera;

Statement

Usage Precautions

Do not disassemble the housing without authorization to avoid damage or electric shock;

3. Transport and Handling

To prevent incidental damage to the device during transport. Handle the device with due care. The original

packaging materials and carton are preferred;

Power the device off before handling or part replacement to prevent any damage;

Table of Contents

一、Product Description.................................................................................................................................... - 1 -

1. Product Overview .................................................................................................................................. - 1 -

2. Technical Specifications......................................................................................................................... - 1 -

3.主机介绍................................................................................................................................................. - 6 -

3. Introduction to Mainframe..................................................................................................................... - 6 -

II. Device and Installation ................................................................................................................................ - 10 -

1. Installation............................................................................................................................................ - 10 -

Step 1: Open the protective cover .................................................................................................... - 10 -

Step 2: Prepare the HDD.................................................................................................................. - 10 -

Step 3: Insert the HDD..................................................................................................................... - 11 -

Step 4: Install SIM and SD cards ..................................................................................................... - 12 -

Step 5: Lock the electric lock........................................................................................................... - 12 -

Step 6: Install the mainframe ........................................................................................................... - 13 -

Step 7: Install GPS, 3G/4G, WiFi antenna....................................................................................... - 13 -

Step8：接电源线............................................................................................................................. - 14 -

Step 8: Connect the power cord ....................................................................................................... - 14 -

Step 9: Connect the display output unit ........................................................................................... - 15 -

Step 10: Alarm input and output cable............................................................................................. - 15 -

Step 11: RS232/RS485 device connection....................................................................................... - 16 -

Step 12: Connect PTZ ...................................................................................................................... - 16 -

2. Connection Method of This Solution................................................................................................... - 17 -

III. Basic Settings............................................................................................................................................. - 18 -

1. Basic Setup:.......................................................................................................................................... - 19 -

Step 1: .............................................................................................................................................. - 19 -

Step 2: set Date & Time ................................................................................................................... - 19 -

Step 3: Set Vehicle INFO ................................................................................................................. - 20 -

Step 4: User Setup............................................................................................................................ - 21 -

Step 5: Network Setup ..................................................................................................................... - 21 -

Step 6: Display Setup....................................................................................................................... - 22 -

2.Channel Mode....................................................................................................................................... - 23 -

3. Record Setup:....................................................................................................................................... - 25 -

Step 1: Enter the Record Setup interface ......................................................................................... - 25 -

Step 2: Record Basic Setup.............................................................................................................. - 25 -

Step 3: Main Code............................................................................................................................ - 26 -

Step 4: Sub-Stream Setup................................................................................................................. - 26 -

Step5：录像计划（定时录像模式下需设置）............................................................................. - 27 -

Step 5: Recording Schedule (to be set in timing record mode)........................................................ - 27 -

Step6：镜像录像设置..................................................................................................................... - 28 -

Step 6: Mirror Record ...................................................................................................................... - 28 -

Step7：SD 卡录像设置................................................................................................................... - 29 -

Step 7: SD Record............................................................................................................................ - 29 -

Step8：报警录像设置..................................................................................................................... - 29 -

Step 8: Alarm Record....................................................................................................................... - 29 -

Step9：IPC 设置 ............................................................................................................................. - 30 -

Step 9: IPC ....................................................................................................................................... - 30 -

4.报警设置：........................................................................................................................................... - 32 -

4. Alarm Setup: ........................................................................................................................................ - 32 -

Step1：进入报警设置..................................................................................................................... - 32 -

Step 1: Enter the Alarm Setup interface ........................................................................................... - 32 -

Step2：传感器设置......................................................................................................................... - 32 -

Step 2: Sensor Setup ........................................................................................................................ - 32 -

Step3：速度报警设置..................................................................................................................... - 33 -

Step 3: Speed Setup.......................................................................................................................... - 33 -

Step4：加速度报警设置................................................................................................................. - 34 -

Step 4: G-sensor Setup..................................................................................................................... - 34 -

Step5：温度报警设置..................................................................................................................... - 34 -

Step 5: Temperature Setup ............................................................................................................... - 34 -

Step6：联动报警设置..................................................................................................................... - 35 -

Step 6: Linkage Setup ...................................................................................................................... - 35 -

Step7：移动侦测报警设置（暂不支持）..................................................................................... - 36 -

Step 7: Motion Detection（coming soon）..................................................................................... - 36 -

5.系统工具：........................................................................................................................................... - 37 -

5. Configuration: ...................................................................................................................................... - 37 -

Step1:进入系统工具...................................................................................................................... - 37 -

Step1:Enter system tools.......................................................................................................... - 37 -

Step2：系统配置管理..................................................................................................................... - 38 -

Step 2: Configuration management.................................................................................................. - 38 -

Step2:设备格式化 ........................................................................................................................... - 38 -

Step 2: Formatting............................................................................................................................ - 38 -

Step3：日志搜索............................................................................................................................. - 39 -

Step 3: Log Search ........................................................................................................................... - 39 -

6.外设设置：........................................................................................................................................... - 40 -

6.Peripheral Setup:................................................................................................................................... - 40 -

Step1：进入外设设置..................................................................................................................... - 40 -

Step 1: Enter the Peripheral Setup interface..................................................................................... - 40 -

Step2：云台设置............................................................................................................................. - 40 -

Step 2: PTZ ...................................................................................................................................... - 40 -

Step3：无线宽带设置..................................................................................................................... - 41 -

Step 3: Wireless Setup...................................................................................................................... - 41 -

Step4：WiFi 设置............................................................................................................................ - 42 -

Step 4: WiFi Setup ........................................................................................................................... - 42 -

Step5：油量设置............................................................................................................................. - 43 -

Step 5: Oil Setup .............................................................................................................................. - 43 -

Step6：串口设置............................................................................................................................. - 44 -

Step 6: Serial Device Setup.............................................................................................................. - 44 -

7.录像搜索：........................................................................................................................................... - 44 -

7. Record Search: ..................................................................................................................................... - 44 -

8.系统信息：........................................................................................................................................... - 45 -

8. System Information:............................................................................................................................. - 45 -

附录 1：MDVR 常见问题及处理.................................................................................................................. - 46 -

Appendix 1: Common Questions and Answers (QA) for MDVR.................................................................... - 46 -

Appendix 2: FM MDVR-IP4/IP8 Memory Space Reference .......................................................................... - 52 -

版本升级记录 ................................................................................................................................................. - 54 -

Revision History ............................................................................................................................................. - 54 -

- 1 -

一、Product Description

1. Product Overview

FM MDVR-IP4/IP8 is a hybrid HD MDVR with combined 4 ways of HD and 4/8 ways of analog audio

& video recording and replaying specially designed for vehicles. The product adopts ARM DSP fast dual-c. ore

processor running on the Linux embedded OS, and also integrates the most advanced H.264 video

encoding/decoding in IT industry, 3G/4G network, GPS and WiFi, as well as fail-safe protection, HDD shock

absorption, HDD heating, wide voltage features. It is extensively applied in public buses, logistics vehicles, school

buses, police cars, financial convoy cars and fuel tankers.

Features:

H.264 image compression encoding supported, PAL: 00fps@720P, 200fps@960H

FM MDVR-IP4/IP8 support multi-mode HD video access (see technical specifications for details)

Air video interface is used to provide high reliability and strong anti-seismic property

Built-in 3G/4G network, GPS, WiFi (optional)

Built-in 2.5" HDD, max. 2TB HDD supported, damping technique

1 HDMI, 2 CVBS video outputs, maximum 1080P supported

Good scalability, 1 RS485 interface, 2 RS232 interfaces

8V-36V wide voltage DC supply, 12V POE power supply supported

HDD heating technique supported, operating temperature range -40℃- + 80℃

2. Technical Specifications

Item

Parameter

FM MDVR-IP4/IP8

系统

System

操作语言

Language

中文/英文

Chinese/English

操作界面

Operating

interface

图形化菜单操作界面（OSD 菜单）

Graphical user interface (OSD menu)

密码安全

Password &

security

用户密码、管理员密码两级管理

User password and Admin password management

- 2 -

视频

Video

视频输入

Video input

4路复合视频输入+4 路网络摄像头

4-way composite video input + 4-way

network camera

支持 4*720P AHD/960H/D1 摄像头

Four 720P AHD /960H/D1 cameras

supported

或支持 4*720P/1080P 网络摄像头

Or four 720P/1080P network camera

supported

或支持 2*720p AHD+2*960H 模拟

混接

Or two 720p AHD + two 960H analog

mixing supported

或支持 4*720P IPC+4*720P

AHD/960H/D1 高清混接

Or four 720P IPC + four 720P

AHD/960H/D1 HD mixing supported

路复合视频输入+4 路网络摄像头

-way composite video input + 4-

way network

camera

支持

8*960H 摄像头

Eight 960H camera supported

或支持

4*720P/1080P 网络摄像头

Or four 720P/1080P network camera

suppo

rted

或支持

4*730P IPC+8*960H/D1/CIF 高清混

接

Or four

720P IPC + eight 960H/D1/CIF

mixing supported

视频输出

Video

output

3路视频输出(1 路HDMI，最大支持 1080P、2路CVBS，其中 1个φ3.5

Phone

Jack,一个在 24PIN 连接头)

way video output (1 HDMI, max. 1080P supported, 2 way CVBS, of which one is

φ3.5 Phone Jack and the other one is 24PIN connector)

视频显示

Video

display

支持 1~8画面显示

1~8screens supported

支持

1~12 画面显示

12 screens supported

视频标准

Video

standard

PAL 制式、NTSC 制式

PAL format, NTSC format

图象压缩

Image

compression

H.264 Main profile，PAL：100 帧

720P/秒、NTSC：120 帧720P/秒

H.264 Main profile, PAL: 100 frames

720P/s, NTSC: 120 frames 720P/s

H.264 Main profile

，PAL：200 帧960H/

秒

、

NTSC：240 帧960H/秒

H.264 Main profile, PAL: 200 frames 960H/s,

NTSC: 240 frames 960H/s

音频

Audio

音频输入

Audio input

路音频输入

4 audio inputs

路音频输入

8 audio inputs

音频输出

Audio

output

2路音频输出（其中 1个φ3.5 Phone Jack,一个在 24PIN 连接头）

2 audio outputs (one is φ3.5 Phone Jack, and the other is 24PIN connector)

录音方式

Recording

mode

声音与视频同步录制

Synchronous video & audio recording

图像处理

及存储

图像格式

Image

format

CIF/D1/960H/720P/1080P 可选

CIF/D1/960H/720P/1080P optional

CIF/D1/960H

可选

CIF/D1/960H optional

- 3 -

Image

processing

and storage

视频流标准

Video

streaming

standard

ISO14496-10

视频码率

Video bit

rate

CIF: 1536Kbps ~ 128Kbps

HD1: 2048Kbps ~ 400Kbps

D1: 2048Kbps ~ 400Kbps

960H: 2048Kbps ~ 400Kbps

720P: 4096Kbps ~ 400Kbps

8级画质可选，1级画质最高，8级最低

Eight picture quality levels are available, with level 1 being

the highest and level 8

being the lowest

音频码率

Audio bit

rate

40Kbps

数据存储

Storage

最大支持 2T 硬盘/SSD

Max. 2T HDD/SSD

通讯板上 1个SD 卡，当硬盘出错时支持 SD 卡备份录像（根据 3G/4G 模块可

选）

One SD card is provided on the communication board. When the HDD is exceptional,

you can back up videos into the SD card (3G/4G module is optional)

报警

Alarm

报警输入

Alarm input

8个报警输入，可配置 1V 以下低电平报警或 5V 以上高电平报警

Eight alarm inputs. You can set the lower level alarm (1V or below) or upper level

alarm (5V or above)

报警输出

Alarm

output

1个报警输出，输出高电平 12V

One alarm output, the higher level of this output is up to 12V

通信接口

Communica

tion

interface

RS485 接口

RS485

interface

支持 1个RS485 接口

One RS485 interface supported

RS232 接口

RS232

interface

支持 2个RS232 接口

Two RS232 interfaces supported

无线通信

Wireless

内置 3G 通信模块(HSUPA/HSDPA/WCDMA/EVDO/TD-SCDMA)可选

Optional built-in 3G communication module (HSUPA/HSDPA/WCDMA/EVDO/TD

SCDMA)

4G 内置 4G 通信模块(FDD-LTE/TDD-LTE)可选

Optional built-in 4G communication module (FDD-LTE/TDD-LTE)

WiFi 内置 WiFi 模块（可选）

Built-in WiFi module (optional)

GPS

支持内置 GPS 模块，地理坐标、速度等可写入编码码流，同时可以无线上传

Writable code stream such as built-

in GPS module, geographical coordinate, rate supported; in

addition, wireless uploading is possible

- 4 -

传感器

Sensor

内置加速度传感器 G-Sensor

Built-in acceleration sensor G-Sensor

配套软件

Supporting

software

PC 端回放分析

Play-back

analysis in PC

在

PC 端回放视频文件，同时对文件中的车辆信息进行分析

Play back video file in PC, and analyze vehicle information in the file

CMS 管理软件

CMS

management

software

通过无线网络实现视频预览、

GPS

上传、报警上传及中心命令下发、参数配

置等功能

Use the wireless network to realize video preview, GPS upload, alarm upload and

command issuance and parameter configuration

软件升级

Software

upgrade

本机支持通过前置 USB2.0 接口和远程 CMS 平台升级

Front USB2.0 interface and remote CMS upgrade are possible for this device

- 5 -

产品电气参数：

Electrical Specifications:

电源输入

Power supply +8～+36V

8V～36V，使用前请确保车载蓄电池供电电压；长期超过 36V，

将烧坏机器。

8V～

36V, Check the supply voltage of the vehicle battery before use; if

it is supplied with more than 36V for a prolonged period, the device

may be damaged.

电源输出

Power output 12V

12V

（

+/-0.2V

），最大电流

:3A

12V(+/-0.2V), max. current: 3A

ACC 检测

ACC detection

≤4V 关机

Power off

≥5V 开机

Power on

视频输入阻抗

Video input

impedance

75Ω 每个视频输入阻抗：75Ω

Each video input impedance: 75Ω

视频输出电压

Video output

voltage

2Vp-p

2VP-P CVBS 输出模拟信号，显示器设备输入需要 75Ω阻抗以适应

它。

2VP-P CVBS output analog signal which should be adapted by 75Ω of

input impedance from the display unit.

I / O 接口

I/O interface

1V 以下

1V or below

低电平报警

Low level alarm

以上

5V or above

高电平报警

High level alarm

工作温度

Working

temperature

-40℃～80℃在通风良好的环境

In a well-ventilated place

Table des matières

Autres manuels Fleetminder DVR

Fleetminder

Fleetminder MDVR4 Manuel utilisateur

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur