selected
1
ON
AM
PM
OFF
7. , , displayed, is displayed
shortly, and hour
8. To select hour press or button.
button. , ,
displayed, displayed shortly,
and minutes
10. To select minutes press or but-
ton.
button.
OFF TIME SETTING (PROGRAM 1)
1
ON
AM
PM
OFF
12. , ,
displayed, is displayed
shortly, and hour
13. To select hour, press or button.
button. , ,
displayed, displayed short-
ly, and minutes
15. To select minutes press or but-
ton.
button.
NOTE: Either continue to PROGRAM 2 and set on and off times
or stop programming at this point, and PROGRAM 2 re-
mains deactivated.
NOTE: PROGRAM 1 and 2 use the same on (Thermostatic) and
off temperatures for , and Daily Timer ( , ,
). Once a new on (Thermostatic) and / or off tempera-
ture has been set, that temperature becomes the new
default setting.
NOTE: If , or Daily Timer are programmed for PRO-
GRAM 1 and PROGRAM 2 on and off times, these be-
come the new default times. The batteries must be re-
moved to clear the PROGRAM 1 and PROGRAM 2 on
and off times and temperatures.
or Daily Timer ( , , ) selected
se-
lected” (above).
Set on time and off time for both Saturday and Sunday.
day of the week, for multiple days of the week, or for every day
of the week.
Default settings:
ON
AM
PM
OFF
TEMPERATURE
1. Press button and hold until
and set temperature (set-
ting in Thermostatic Mode) displayed.
2. To continue press button or wait.
-
es.
3. Select off temperature by pressing
the or button.
button.
NOTE: The on (Thermostatic) and off set temperatures are the
same for each day.
ON
AM
PM
OFF
DAY
5. or button to
choose between ,, , ,
.
button.
ON
AM
PM
OFF
1. Press or or button to enter
Manual Mode.
2. Press button to enter Thermostatic
Mode.
NOTE: The set temperature for Thermostatic Mode is the tem-
perature for the on time in Program Mode. Changing the
Thermostatic Mode set temperature also changes the
on time temperature in Program Mode.
4| P a ge
NOTE: The location of the remote control handset is important to assure proper temperature regulation. To obtain a
constant temperature. Flare recommends that the handset should be between 3 and 15 feet away from the appliance
but not directly above it. We also advise that the handset should be located away from any other heat source and not
in direct sunlight as this may affect the temperature sensor located in the remote handset.