USER MANUAL FOR 400 WATTS POWER INVERTER
USER’S MANUAL--Read before using this equipment
More than 150 Watts by connecting RED terminal from inverter to + of battery
terminal and connect BLACK terminal from inverter to –of battery terminal. NOTE:
There will be a spark between the cable from the negative terminal of the inverter
when it is first connected to the negative terminal of the battery.
Insert the plug of your appliances intoAC socket at the front of the inverter.
Turn ON the power switch that is located at the front of the inverter, and the green
LED light will light as indicator that the is working.
CAUTION:
DO NOT USE THE INVERTER IN A POSITIVELY GROUNDED VEHICLE.
DO NOT POWER MORE THAN 150 WATTS WHEN THE POWER INVERTER IS
CONNECTED TO THE CAR CIGARETTE LIGHTER SOCKET POWER SUPPLY.
DOING SO MIGHT DAMAGE YOUR VEHICLE’S FUSE OR ELECTRICAL SYSTEM.
RECOMMENDATION
If the power inverter makes a beeping sound, turn OFF the power inverter and
disconnect all appliances from the inverter and disconnect the inverter from the
power supply. The beeping sound is the low battery warning, which indicates that the
voltage of the battery power supply is too low to operate the inverter. Start the vehicle
engine and let the battery charge before reconnecting and operating the power
inverter.
When the inverter is not in use, turn the switch to the OFF position and disconnect the
inverter from the power supply.
Disconnect the inverter before starting the vehicle’s engine.
BATTERY USE
To avoid over-discharging your vehicle’s battery, disconnect the inverter from the
battery, start and run the vehicle to maintain the battery voltage, reconnect the
inverter to the battery.
If you choose to connect the inverter directly to your battery terminals, it is important
to connect correctly with the right polarity. Connect the positive (+) RED cable from
RED terminal on the inverter to the positive (+) battery terminal and connect the
negative (–) BLACK cable from the BLACK terminal on the inverter to the negative (–)
battery terminal.