FiveO VIRGO 100 Manuel utilisateur
VIRGO 100
PORTABLE COMBO
SYSTEM
Elettronica Montarbo srl Via O. Pigini, 8 - 62010 Montelupone (MC) - ITALY - T + 39 0733 227 1
F+ 39 0733 227 250 - [email protected] - montarbo.com - Company under control of EKO Music Group SpA
VIRGO 100
VIRGO 100
Important Safety Instructions
- 2 -
VIRGO 100
- 3 -
Table of Contents
1. FEATURES
2. DESCRIPTION OF VARIOUS PARTS
3. RECEIVER DISPLAY
4. METAL HAND MIC
5. BELTPACK MIC
6. TECHNICAL SPECIFICATION
7. CONNECTION DIAGRAM
8. BLOCK DIAGRAM
9. ACCESSORIES
10. CAUTION
4
5
8
9
10
14
15
16
17
17
VIRGO 100
- 4 -
FEATURES
● User- friendly operation.
● It is equipped with professional wireless receiving module with quartz locked, output
volume control when the wireless module works, MP3 player and AUX output can be
muted.
● Built-in one microphone input and one AUX input with individual volume controls.
● Built-in one AUX input and one line output.
● Built-in two tone (treble, bass) and master volume controls.
● Digital MP3 player with clear sound, easy operation.
● Class D power amplifier and professional two way crossover.
● Professional mounting hole for heightening this unit to meet the requirements.
● Wheel and handle for easy carriage.
● Two power supplies: AC 115-120V/220-240V, DC22.2V (LITHIUM BATTERY)
● When AC works, Power LED lights up; when battery works, Power LED and battery level
LED light up.
● When AC inputs, the battery will charge automatically, and Recharge indicator will light
red. After full recharged, the indicator will light green.
VIRGO 100
- 5 -
DESCRIPTION OF VARIOUS PARTS
Woofer
Tweeter
Antenna
Handle
Handle could only be pushed and pulled
to transport the unit on the wheels.
Do NOT use this handle to lift
the unit up!
VIRGO 100
- 6 -
DESCRIPTION OF VARIOUS PARTS
UP
● Short press: Select the "UP" frequency.
● Long Press and hold the button for 3 seconds up, enter into IR pairing mode,
simultaneously the CH code will flash, then release the button and paired with MIC IR.
● Press and hold the ”UP” button 6 seconds or more, the frequency/CH will be
progressively increased. Then it enter IR pairing mode and simultaneously CH code
will start to flash after the button is released.
SET
● Short press for one time: Enter the volume controlling mode and the volume can be
adjusted by “UP” and “DOWN”.
● Short press for two times: Enter SQUELCH controlling mode, SQUELCH can be
adjusted by “UP” and “DOWN”.
DOWN
● Short press: Select the "DOWN" frequency.
● Press and hold the ”Down” button for 3 seconds, enter swept mode and begin to
sweep the whole frequency rapidly, releasing the button, the system will select the
cleanest channels from these frequencies swept automatically. Then enter into IR
pairing mode and CH code start to flash. At this time it will pair with MIC IR.
Button for popping out the module
CH1 Volume Control
This knob is used to control the CH1 level.
CH2 Volume Control
This knob is used to control the CH2 level.
TREBLE CONTROL
This knob is used to control the treble level with range going from +10dB--10dB.
BASS CONTROL
This knob is used to control the bass level with range going from +10dB--10dB.
Master Volume control
This knob is used to control the Master level.
Battery level LED
Battery level indicator
Recharge Indicator LED
Charge indicator: lights red when charging and lights green after fully charged.
Power LED
The Power LED lights up when the amplifier is powered ON.
CH1 LINE and MIC Switch
MIC inputs when pressing MIC Switch, line inputs when the MIC Switch is popped out.
LINE1 or MIC1 Input
They are used for both balanced and unbalanced inputs.
1
2
3
4
5
6
7
8
9
10
11
12
14
13
VIRGO 100
- 7 -
DESCRIPTION OF VARIOUS PARTS
CH2 AUX Input
It is used for AUX input.
LINE OUT
It is connected to recorder or mixer.
Voice priority
When this button is engaged, CH1, RF1&RF2 will have priority over AUX and MP3
AUX and MP3 will be muted.
USB Volume control
This knob is used to control the USB player volume.
Play / Pause
Record
Press this button once and you are ready to record. Press the button again to start
record. To stop press the POWER button.
Previous song
Play the previous song.
Next song
Play the next song.
Repeat
Select between different repeat modes (repeat all, repeat one song, shuffle and
mormal playback.)
POWER (ON/OFF)
Press and hold this button for switch ON or OFF VIRGO 100.
USB PORT
For connecting with USB memory.
POWER SWITCH
If the switch is set to the position “ON”, both AC and DC supply is connected, AC
supply has priority over DC supply. When there is no AC voltage input, it will
automatically switch to DC supply and the unit keeps working during AC/DC is
switching. If the switch is set to the position “OFF”, the whole unit doesn’t work.
AC INPUT
115-120V 50-60Hz, 220-240V 50-60Hz. Please check the voltage available in your
country and how the voltage for unit is configured before attempting to connect your
unit to the main AC.
Wheel
Rubber Feet
Charging indicator LED
Lights red when charging and lights green when the battery is fully charged.
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
VIRGO 100
- 8 -
RECEIVER DISPLAY
● Standby Mode display
● Volume control display
● SQUELCH control display
SQUELCH control SQUELCH indicator
Volume control Mute or unmute AF level indicator
Frequency Channel
Current Frequency
Mic Mute indicator
Battery charge level
AF power indicator
RF power indicator
1
2
3
4
5
6
1 2 3
1 2
VIRGO 100
- 9 -
METAL HAND MIC
Status indicator
This LED displays the operation mode:
1
Power/Mute Switch
Press and hold to turn the unit on or off. Press
and release to mute or unmute the transmitter.
Battery Cover
Unscrew the battery cover and slide down to
open the MIC battery compartment.
2
3
GREEN
RED
Flashing RED
Normal Operation
Mute
Low Power
VIRGO 100H
VIRGO 100H
VIRGO 100B
VIRGO 100
- 10 -
METAL HAND MIC
BELTPACK MIC
Battery Holder
Open the battery holder by pressing the tab and lifting the cover, and insert two
standard AA (LR6) batteries here, being sure to observe the correct polarity.
WARNING: Do not insert the batteries backwards; doing so can cause severe
damage to the MIC and will void your warranty.
Input GAIN Control
This control adjusts the transmitter input sensitivity. For optimal performance, you
can use the included screwdriver to set the input GAIN control.
IR Lens
This window is used to capture the infrared signal sent from the receiver to the
transmitter during the IR UP/DOWN operation. The battery cover must be open and
the IR Lens facing towards the receiver to load the selected channel.
Plastic Screwdriver
Designed for adjusting the MIC input GAIN (See #5 Input GAIN Control HH).
Charging indicator LED
Lights red when charging and lights green after fully charged.
4
5
6
7
8
Antenna
This permanently attached transmitter antenna should be fully extended during
normal operation.
Status Indicator
This LED displays the operation mode:
Power/Mute Switch
Press and hold to turn the unit on or off. Press and release to mute or unmute the
transmitter.
GREEN
RED
Flashing RED
Normal Operation
Mute
Low Power
1
2
3
Table des matières
Autres manuels FiveO Intervenants
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur