FiveO GS Manuel utilisateur
GS / DF12P / DF12A
4" Two-way passive system
MINI ARRAY SYSTEM
Important Safety Instructions
- 2 -
1. INTRODUCTION
2. INSTALLATION TIPS
3. USEFULL DATA
4. QUICK START
5. SATELLITE LAYOUT OF THE CONNECTOR PANEL
6. SATELLITE BACK PANEL DESCRIPTION
7. SATELLITE DOWN CONNECTION
8. SATELLITE UP CONNECTION
9. SUBWOOFER BACK PANEL DESCRIPTION
10. TECHNICAL SPECIFICATIONS
11. SYSTEM CONNECTION PLATE
12. WIRE CONNECTIONS
4
4
4
5
6
8
9
10
11
13
15
19
Table of Contents
- 3 -
Introduction
Thank you for choosing the new ARRAY SERIES cabinets have been designed to provide a cost
effective high grade solution while maintainig high quality cabinet construction and optimum
components.
The array series, can be used for all types of applications including, but not limited to, churches,
conference centers and discos.
The woofer and neodymium driver combination provides excellent performance rivaling those
cabinets costing much more.
Our Professional Audio Products are designed and tested by a highly qualified engineering team
with more than 20 years of experience. Great care is placed in delivering products with excellent
performance, specifications and dependable reliability. Also great emphasis is placed in creating
and bringing to market products that can fill multiple applications and also offer customers
exceptional value.
● Speakers should be placed in a position that allows for unobstructed sound projection. In many
instances it is beneficial for speakers to elevate on tripod stands to achieve maximum dispersion
and reach. Consider speaker stand or equivalent to raise speakers.
● Using quality cables ensure best possible sound. Consider using 16 or 14 gauge cables or
equivalent.
● For best results match the speakers to a good amplifier that matches the wattage and impedance
of your speakers. Proper amplification power results in good quality audio and longer component
life. Check out.
● Avoid pointing microphone directly at an amplified speaker otherwise could cause feedback
possible damaging speaker components and your hearing.
Installation Tips
- 4 -
Wall bracket
Satellite
Quick Start
When mounting a speaker onto any stand, always ensure that the stand is on a flat, level surface,
with the legs fully extended. Be sure to check that the maximum load weight for the stands is greater
than the weight of the ARRAY SYSTEMS loudspeaker. Never use a stand with a maximum load
weight lower than the speaker. Do not attempt to mout more than one speaker on a stand at one
time.
The ARRAY SYSTEMS loudspeakers are heavy. It is recommended that a second person to help
place the cabinet on a stand.
When the speaker is placed on a stand, always check the integrity and center of gravity of the
system If the speaker can be tipped easily, or the pole is swaying, it is recommended that you lower
the height of the stand. Position the stand and route cables so that the performers and the audience
cannot tip over or trip on the system.
Subwoofer
Subwoofer
Pole Pole
Satellite Satellite
- 5 -
Satellite Layout of The Connector Panel
More module
Versatile mounting options
Compared to many other speaker designs, the satellite Series is remarkably easy to install in
several ways. It can be hung easily with chains, strong wires and cables using the accessory
brackets.
There are also options for hanging with a pre-install rame by itself or configured with a subwoofer.
There are also other options including ceiling and wall brackets as well as an adapter for use with
a dedicated stand.
One module
The direction of the bracket can be adjusted from any side.
The bracket support wall and ceiling mounting with most 8 modules .
The direction and angle can be adjusted from any side.
* Option wall bracket
- 6 -
Satellite Layout of The Connector Panel
You can insert each three different holes when connecting the rear bracket. You can obtain different
sound by different angles.
Align two units to make the latch hole in the same line. Insert the latch and lock the screw tightly.
Adjust the angles of the unit (four angles: 0°-4°-8°-12 can be adjusted), insert the rear
connecting pin into the related slot and put the latch into the hole.
Connect Manner
1
2
A system in configured by vertically stacking four speaker modules with a total driver complement
of four woofers and 12 tweeters positioned along the baffle surface, this configuration allows the
variable directivity control and low-frequency dispersion control comparable to using a large
constant-directivity horn speaker. A choice of three directivity angles---0, 4, 8 and 12 degrees can
be employed as needed.
For instance, a specific directivity angle, or each module can have its directivity independently set
for a specific coverage requirement. When two or multiple modules are connected to configure an
arc, they effectively function as an immense single speaker controlling directivity for considerably
lower frequencies. As a result, public address functions demonstrate optimal intelligibility even in
environments with long reverb times.
Adjustable sound dispersion(for example four pcs)
directivity
angle 32
directivity
angle 48
- 7 -
Satellite Layout of The Connector Panel
Minimal reflective effects
Whether mounted on the wall or ceiling, the satellite is remarkably free from the comb filter and
interference effects often encountered with other speaker designs. It can therefore produce more
low frequency output even when mounted on the wall or ceiling.
Satellite Back Panel Description
a. set the slide switch at "parallel" position to make the product in parallel.
b. Set the switch at "series" position to make products in series, but the slide switch of the last
product has to set at "parallel" position.
1
2
3
4
1) INPUT: Receive the power coming
from an external power amplifier.
2) PARALLEL: power output for
another product to parallel, parallel
and input are link.
3) SERIES: Power output for another
satellite speaker to series.
4) Slide Switch: Parallel or Series
Transform Switch
- 8 -
INPUT
Satellite Down Connection
- Power output for satellite speaker down connection
1
2
3
4
5
6
7
8
Module (1-3-5-7):
Module (2-4-6-8):
8 Module.array.
(4.ohms)
6 Module.array.
(5.33.ohms)
Module (1-3-5):
Module (2-4-6):
4 Module.array.
(8.ohms)
Module (1-3):
Module (2-4):
2 Module.array.
(4.ohms)
Module (1-2):
1 Module.array.
(8.ohms)
Module 1:
INPUT
INPUT
INPUT
INPUT
- 9 -
Satellite Up Connection
- Power output for satellite speaker UP connection
1
2
3
4
5
6
7
8
Module (1-3-5-7):
Module (2-4-6-8):
8 Module.array.
(4.ohms)
6 Module.array.
(5.33.ohms)
Module (1-3-5):
Module (2-4-6):
4 Module.array.
(8.ohms)
Module (1-3):
Module (2-4):
2 Module.array.
(4.ohms)
Module (1-2):
1 Module.array.
(8.ohms)
Module 1:
INPUTINPUTINPUTINPUTINPUT
- 10 -
Ce manuel convient aux modèles suivants
2
Table des matières
Manuels Système de haut-parleurs populaires d'autres marques
Sondpex
Sondpex Active Speaker System and Digital Music... Manuel utilisateur
JVC
JVC NX-PN7 Manuel utilisateur
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuel utilisateur
Yamaha
Yamaha NX-A01 - Speaker Sys Manuel utilisateur
SE Audiotechnik
SE Audiotechnik I-LINE Manuel utilisateur
Gemini
Gemini WRX-843 Series Manuel utilisateur