Five9NS R2100RS Manuel utilisateur
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 1
Five9NS R2100RS Rack Mount Server
Installation Manual
Version July 24, 2014: This version supersedes all previous versions.
2014 Five9 Network Systems LLC, 300 Main Street, Suite 12A, East Rochester, NY 14445, USA
All rights reserved.
This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation.
No part of this product or document may be reproduced in any form by any means without prior written authorization of Five9NS and its
licensors, if any.
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 2
Table of Contents
Section Description Page
1.0 General Information ....................................................................... 3
1.1 Introduction ......................................................................................... 3
1.2 Purpose of the Equipment ................................................................... 3
2.0 Application ...................................................................................... 3
2.1 Introduction .......................................................................................... 3
2.2 Typical Application ................................................................................ 3
3.0 Installation ....................................................................................... 4
3.1 Prior to Installation ................................................................................ 4
3.2 Unpacking and Inspection ..................................................................... 5
3.3 Cautions & Warnings ............................................................................. 5
3.4 Wiring ………………………............................................................................ 6
3.5 Physical Characteristics .......................................................................... 6
3.6 Electrical Characteristics ........................................................................ 6
3.7 Post-Installation Test ............................................................................. 7
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 3
R2100RS
2U Rack Mount
1.0 General Information
1.1 Introduction
This manual contains information for the proper installation of the Five9 Network
Systems, LLC. 2U Rack Mount Server, Model No: R2100RS. Also included are
physical and electrical characteristics of the unit.
1.2 Purpose of the Equipment
1.2.1 Five9NS’s R2100RS is a 2U server designed for storage and RAID
applications. It supports a large range of Intel XEON x86 processors from
dual-core to quad-core, which are carried as a part of the Intel Embedded
IA Extended Life Cycle Support. In the recommended installation, the unit
receives power from an AC power source and sits in a rack.
1.2.2 It supports Solaris which is the most scalable and secure operating
system. With Solaris, the R2100RS server provides fast performance,
near-continual uptime, and the security and reliability required from a
mission-critical system.
2.0 Application
2.1 Introduction
The R2100RS is a 100-240 Vac product that serves as a rack mount unit. It
contains an Intel motherboard and CPU. Included also in the unit are seven 2TB
Hard Drives, an 8-port RAID Card, a 4-port Ethernet Adapter, and a DVD-RW
drive.
2.2 Typical Application
Within a rack mount environment, the R2100RS will be installed above or below
other servers. Specific rack mount instructions apply to the installation process.
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 4
Please see section 3 for more details.
3.0 Installation
3.1 Prior to Installation
The R2100RS is a simple module to install. Before installation, the following items
should be considered
3.1.1 Careful consideration of the location of the R2100RS is necessary. Some
of the items to consider include:
Space to allow adequate airflow
Length of cable runs
Environmental conditions
Access for service repair (if applicable)
Note: Please see detailed instructions for rack mounting in section 3.1.3
3.1.2 The R2100RS shall be installed to conform to the standards designated by
the customer and manufacturer specifications as to the unit location and
type of installation.
3.1.3 The following rack mount instructions should be followed
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment
may be greater than room ambient. Therefore, consideration should be
given to installing the equipment in an environment compatible with the
maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be
such that the amount of air flow required for safe operation of the
equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven
mechanical loading.
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 5
D) Circuit Overloading - Consideration should be given to the connection
of the equipment to the supply circuit and the effect that overloading of
the circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be
used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit (e.g. use
of power strips)."
F) System Maintenance - Maintenance and servicing of this product is to
be performed only by trained service personnel who are knowledgeable
on the procedures and hazards associated with this product.
G) Cautions and Warnings –All caution and warning instructions noted on
the product and in the manual should be followed (see Section 3.3 below
for details).
3.2 Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the R2100RS. Verify that all
components have been included in the package per the packing list.
Inspect the unit for shipping damage.
3.2.2 If damage has occurred during shipping, a claim should be filed with
Five9NS and an RMA shall be obtained from Five9NS.
3.3 Cautions and Warnings
3.3.1 Do not remove any factory-installed screws
3.3.2 Do not install near heat sources
3.3.3 ESD (Electro Static Discharge) guidelines shall be followed when installing
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 6
the optional equipment
3.3.4 CAUTION: Risk of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
3.4 Wiring Requirements
3.4.1 The length and routing of external cables should be carefully studied and
planned before attempting installation of the equipment. Allow adequate
space for installation of cable and connectors. Avoid sharp bends.
3.5 Physical Characteristics
3.5.1 The R2100RS shall be located away from heat sources, magnetic fields
and areas with excessive dust.
3.5.2 When using a rack mount, the unit shall be rigidly mounted to its location
using the appropriate hardware
3.6 Electrical Characteristics
3.6.1 Electrical Specifications
Electrical
Input Voltage
100-240 Vac
Input Current
8-4 Amps max
Input Frequency
60-50 Hz
3.6.2 Power Switches
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 7
The R2100RS has 3 power switches: a System Power Switch and a System Reset
Switch in the front as well as a general On/Off switch on the power supply from
the back. The following diagram shows the front power switches and the rest of
the front panel controls and indicators.
The System reset switch will soft reset the system; the PSU will not cycle
the power ON / OFF.
The System power switch will power ON / OFF the system power supply
according to Motherboard BIOS setting, (if you press power switch over 4
seconds the system will power off)
The power switch on the back is a general On/Off switch providing the ability to
hard turn off the system
3.7 Post-Installation Test
Once the R2100RS is properly installed, turn the system on and verify using a
monitor that the motherboard is booting up. To test with Solaris 10, use the
following guidelines:
Login as root -> Open a shell window and type in the following commands:
Five9 Network Systems LLC. R2100RS Installation Manual
Document # 000004, V1.0, 07/24/2014 Page 8
cd /usr/sunvts/bin
./startsunvts
You will have to choose between different interfaces to run SUNvts with. Choose
the command line option and enter the following commands:
./vts_cmd list_tests
This command lists all the tests to be performed. Make sure all test are enabled.
To enable a certain test use the following: ./vts_cmd enable_test
testname
./vts_cmd set_global_options [Duration of
Testing:60,Verbose:Enable]
This will run the tests for 60 minutes.
./vts_cmd start
This will start the testing. You can stop the tests anytime using: ./vts_cmd
stop. Please refer to the SUNvts user guide for more information.
Table des matières
Autres manuels Five9NS Serveur
