What’s in the box
● UPA-1000 pre-amplifier unit
● USB A -> Mini USB B cable
● Phono (RCA) audio cable
● 3.5mm jack audio cable
Usage (PC capture / playback from turntable)
1. If your turntable is does not have a cable, connect the supplied RCA audio cable from the
output of your turntable to the Phono In connection on the UPA-1000.
2. Toggle the MM/MC switch on the unit to the correct setting for your phono cartridge.
3. Connect a grounding wire (not supplied) between your the grounding points on your
turntable and the UPA-1000.
4. Connect the supplied USB cable from the pre-amp to an available input on the PC /
laptop.
5. Wait for the computer to detect the device. It should be auto detected as “USB
PREAMP”. Your are then able to select this for use on your PC.
6. Selecting this device for use as an input varies depending on your operating system,
please consult your user manual for specific details for your system.
7. To start recording you will need suitable capture software. Audacity is freely available for
most operating systems if you do not have existing software:
http://audacity.sourceforge.net/
8. Once you have suitable software simply press record and start your turntable playback.
