FiSHAW UB200 Manuel utilisateur
UB200
ASSEMBLY INSTRUCTIONS
1
Your FiSHAW bike box should arrive in reasonable
condition if the box is excessively damaged check to
make sure that the bike is not damaged before
accepting delivery.
Find an area to assemble the bike with plenty of
space and have the box facing the correct way up.
With a box cutter, cut the tape around the box with
out damaging the box. Store the box in case you
need to return your FiSHAW bike to us. Store the box
somewhere dry and out of the way eg. Under your
bed.
2
Remove the bike out of the box using a friend to lift
it. Place the bike somewhere, where there is plenty
of space to assemble the bike.
Remove all other contents/ accessories from
the box
3
Remove zip ties with a pair of wire cutters and all
packaging.
Take care when cutting zip ties not to
cut brake/electrical cables on the bike
Box with accessories and front bicycle skewer
with quick release which is zip tied to the front
wheel.
4
Contents of accessories box as shown.
Provided tool kit to assemble the bike
5
Front wheel skewer with quick release
Rotate the forks 180 degrees as shown by the arrow
so that it faces the opposite position it was in. The
correct direction of rotation is the one where all
brake cables are free and not wrapped around the
forks.
6
Insert the handle bar stem into the head tube of the
bike frame.
Using the correct sized allen key tighten the handle
bar stem to the desired height and make sure the
handle bars are square with the bike frame
7
Turn the bike upside down to attach the front
wheel.
Remove the plastic forks bar protector
8
Remove the plastic brake pad wedge from the
caliper, this is used to keep a space open between
the brake pads to make it easier for the brake disc
to insert between the brake pads when installing
the the front wheel to the forks.
Place the front wheel between the forks making
sure the disc brake is inserted between the brake
pads of the caliper.
9
1. Quick release
2. V shaped spring
3. Skewer (axle)
4. V shaped spring
5. Skewer nut
With the V shaped spring(4) and the skewer nut(5)
remove. Insert the skewer with the V shaped
spring(2) with the small end of the spring pointing
towards the wheel. Push the skewer all the way
through to the other side.
Autres manuels pour UB200
2
Autres manuels FiSHAW Vélo
