First K9 Manuel utilisateur
1x
1x
Attach one LEGO® hard point connector to the 166 mm C
channel.
1x
2x
Connect the LEGO® 9 hole straight beam to the hard point connecter with
the two pegs.
1x
Bolt the servo mount to the 166 mm C
channel.
Assemble the baring package by connecting it
to the servo mount.
1x
Bolt a servo on to the
servo mount.
1x
2x
Attach two 288mm C channels
to the 166mm C channel.
1x
A second 166mm
C channel is
added to the
288mm C
channels.
The motor mounts
are connected to
the bottom of the
288mm C channels.
2x
1x
Bolt the 144mm L bracket to the
244mm C channels in front of the
motor mounts. This will be used
later to mount the 12V battery.
Autres manuels First Robotique
Manuels Robotique populaires d'autres marques
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Manuel utilisateur
SunFounder
SunFounder PiDog Manuel utilisateur
Universal Robots
Universal Robots UR5 Manuel utilisateur
Universal Robots
Universal Robots E Series Manuel utilisateur
YASKAWA
YASKAWA MOTOMAN-MPL80 II Manuel utilisateur
EFORT
EFORT ECR5 Manuel d'instructions
