Firestone 2191 Manuel utilisateur

INSTALLATION INSTRUCTIONS

Congratulations on your purchase of a new Control

Panel Accessory kit. This kit was designed to provide

inflation control of your air helper springs. This kit will

be an asset to your vehicle, meeting nearly all of your air

supply needs.

Please take a few minutes to read through the

instructions, identify the components, and learn how to

properly install your Control Panel Accessory kit.

NOTE:

The Control Panel Accessory kit can be used with all

air helper spring products. If you are installing an air

suspensionsystem,donotinstalltheairlinetubingtothe

airspringsasstatedinthesuspensionsysteminstruction

manual. If you are adding the Control Panel Accessory

kit to an existing air suspension system, you will need to

deflate the air springs and remove the air line tubing.

NOTE ON CONNECTING THE AIR LINE TUBING:

Cut the air line tubing as squarely as possible. To

connect the air line tubing to the fittings, push the tubing

into the fittings as far as possible. If for any reason the

tubing must be removed, first release the air pressure

from the air helper spring. Push the collar toward the

body of the fitting and the pull out the tubing. To

reassemble,makesurethetubingiscutsquarelyandpush

the tubing back into the fitting.

Install the relay within three feet of the compres-

sor. Nylon ties can be used to secure any excess wire

and the relay neatly into place. Route the white wire

labeled “Switch Panel” to the control panel. Connect

the white wire to one of the white wires on the back of

the switch. The remaining white wire will be grounded

to the vehicle. Next, connect the orange wire labeled

“Comp +” to the red (positive) wire on the compres-

sor. Connect the red, fused wire labeled "Bat +" from

the relay to the battery or another 12V (positive)

source capable of supporting 20 amps. See Figure

"A".

0 150

30 120

60 90

200

400 600

800

1000

psi kPa

PSI

SINGLE AIR CONTROL PANEL 1

10 -32 x 1" MACHINE SCREW 2

10 -32 LOCK NUT 2

#10 FLAT WASHER 4

RING TERMINAL 1

WIRE CONNECTOR 2

24-8296 12-04 NAD-34167-1

2191 / 2229 / 2205

2348 / 2349 / 2357

2358 / 9110

PARTS LIST

CONTROL PANEL ACCESSORY KIT

ELECTRO-PNEUMATIC CONTROL PANEL

TOOLS REQUIRED:

• 3/16" DRILL BIT • PLIERS

• POWER DRILL • PHILLIPS SCREW DRIVER

• 3/8" DRILL BIT • UTILITY KNIFE

• WIRE CRIMPER/STRIPPER

FIGURE C

Attach the air line tubing to the control panel as shown.

Soak the end of the air line tubing (1) in hot water for a few minutes to

soften the tubing. Do not use pliers to work the tubing on to the barbed

fittings, as the tubing may be damaged.

0 150

30 120

60 90

200

400 600

800

1000

psi kPa

PSI

LOCK NUTS

WASHERS

MACHINE SREWS

CONTROL PANEL

BRACKET

WASHERS

Air Gauge Accessory Kit

Installation Procedure

POSITIVE, 12 VOLT

DASHBOARD

ILLUMINATION

CIRCUIT

GROUND

FROM AIR SOURCE

FIGURE A

ypical air line and wiring diagram for this kit. Note that air line

and wire routing may vary depending on application.

TO AIR SPRINGS

WHITE

These parts included in the 2191 / 2229 kit.

FIGURE  

Install the control panel to the dashboard or selected mounting surface.

Use the provided machine screws, lock nuts, and washers to attach the

control panel to the dashboard.

Install the control panel after the electrical and air line connections have

been made.

o inflate the air springs, hold the paddle switch up until

the desired pressure is reached.

o deflate the air springs, push the paddle switch down.

SIDE VIEW OF

CONTROL PANEL

TO AIR SPRING

FROM AIR SOURCE

FIGURE D

Install the wire connector as shown.

Slip the wire connector over the existing power wire and insert the

unstripped connecting wire into the wire connector. Close the wire

connector over the wires with pliers.0

EXISTING

POWER WIRE

CONNECTING

WIRE

PLASTIC

CONNECTOR

FIGURE E

Attach the control panel illumination wires as shown.

Attach the positive wire (red) to a dashboard illumination circuit.

Attach the negative wire (black) to a suitable ground source on the vehicle.

Should additional wire be necessary,

use 18 gage multi-strand wire.

BACK OF

GAUGE

RING

CONNECTOR

(TO GROUND)

POSITIVE WIRE

(TO DASHBOARD

ILLUMINATION WIRE)

WHITE

(TO GROUND)

20 AMP

FUSE

WHITE

(SWITCH PANEL)

ORANGE

(COMP +)

RED(+)

(BAT +)

RELAY

TO COMPRESSOR

Do Not Return This Product

to the Dealer or Distributor

If you are

• missingparts,

• experiencinginstallationproblems,or

• havetechnicalconcernsregardingthisproduct,

you may contact a Firestone Technical Service Representative at [email protected] or at 800-888-0650 (option 1, and

then option 2). Representatives are available from 7:30 a.m. – 4:30 p.m. Eastern on Monday – Friday, excluding holidays.

If you are located outside of the United States, you should rst contact your distributor or dealer directly with any issues.

When contacting Technical Service, please have the kit or part # ready, along with the make, model, and year of the vehicle.

You may also need to provide details, such as 2WD/4WD or if the vehicle has been lifted or lowered from stock height.

If you have a warranty concern, please include in your email a detailed description of the situation, a photo(s) of the

issue, and your contact information, including ship-to address.

WARRANTY COVERAGE*— The Ride-Rite™ kits, components, and accessories are warranted against defects in

workmanship and materials. This warranty does not cover service or labor charges, neglect…to the product.

PERIOD OF COVERAGE:

• Ride-Rite air springs – Lifetime Limited • Work-Rite load assists – 2 Years Limited

• Sport-Rite air springs – Lifetime Limited • Air-Rite accessories – 2 Years Limited

• Coil-Rite air springs – Lifetime Limited • Brackets, hardware, ttings, air line, and other

• Level-Rite air springs – Lifetime Limited components – 2 Years Limited

HOW TO MAKE A WARRANTY CLAIM — If you purchased your air springs in the U.S. or Canada and believe

you have a part with a warrantable defect, call Firestone directly at 1-800-888-0650.

International customers should contact their distributors or dealers directly with any problems.

(*) Please refer to the “Firestone Limited Lifetime Air Spring Warranty” for details, terns, and conditions.

21-8387 01-13 NAD-37143-1

FIRESTONE LIMITED LIFETIME AIR SPRING WARRANTY

Firestone Industrial Products Company LLC (“Firestone”) warrants that its Ride Rite Air Spring Assembly will perform

according to the manufacturer’s specifications for as long as the vehicle on which the system was originally installed

is owned by the original retail purchaser. This limited warranty does not include installation or other service charges

for replacement.

Warranty Period

The Air Spring is warranted for as long as the original purchaser owns the vehicle on which it was originally

installed. The fasteners and upper and lower brackets which accompany the air spring are warranted for a period

of twenty-four (24) months or 24,000 miles whichever occurs first. This warranty begins on the original retail

delivery date.

What is Covered

Any implied warranties are limited in duration to the coverage period of this warranty (some states do not allow

limitation on how long an implied warranty lasts so the above limitation may not apply to you). This Warranty runs

in favor of the original retail purchaser when the Ride Rite Air Spring Assembly is used under normal operating

conditions according to Firestone’s specifications and installed on the appropriate application. This warranty does not

apply to Ride Rite Air Spring Assemblies that have been improperly applied, improperly installed, used in racing or off

road applications or used for commercial purposes. In addition, the warranty will not apply to products which have

not been maintained and serviced according to the instructions that accompany the air spring assembly. The

consumer will be responsible for any costs incurred in removing the product from the vehicle and the cost to return

the air spring assembly to the dealer or installer from which it was purchased. If it is determined that the Ride Rite

Air Spring Assembly failed as a result of a manufacturing defect, Firestone will repair or replace, at its option, any

product or components subject to this warranty. You should retain a copy of your contract with your installer and

your receipt as proof of the date of installation. This warranty is non-transferable and is not assignable in any way.

Firestone specifically excludes any obligation for consequential damages or incidental expenses including claims for loss of use of

the product, loss of time, inconvenience, or commercial loss. This warranty gives you specific legal rights. You may also have other

rights that may vary from state-to-state. Some states do not allow limitations on how long an implied warranty lasts or allow the

exclusion or limitation of incidental or consequential damages. The above limitation or exclusion may not apply to you. There are

no warranties, express or implied, including implied warranty of merchantability and fitness which extend beyond this warranty.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques