Finlux PRO Feuille d'instructions

ELECTRIC VEHICLE CHARGER

Installation Guideline

Asennusohje

Contents

SAFETY INFORMATION................................................................................................................................2

SAFETY WARNINGS...................................................................................................................................2

GROUND CONNECTION WARNINGS.........................................................................................................3

POWER CABLES, PLUGS and CHARGING CABLE WARNINGS................................................................3

WALL MOUNTING WARNINGS...................................................................................................................3

DESCRIPTION..............................................................................................................................................4

1 - MODEL DESCRIPTION........................................................................................................4

2 - MODEL REFERENCES.........................................................................................................4

GENERAL INFORMATION..........................................................................................................................5

1 - INTRODUCTION OF THE PRODUCT COMPONENTS............................................................5

2 - DIMENSIONAL DRAWINGS..................................................................................................6

3 - ELECTRIC VEHICLE CHARGING STATION EXPLODED PICTURE........................................7

3.1 - Cable Models..................................................................................................7

3.2 - Socket Models.................................................................................................8

REQUIRED EQUIPMENT, TOOLS and ACCESSORIES.................................................................................9

1 - SUPPLIED INSTALLATION EQUIPMENT and ACCESSORIES..............................................9

2 - RECOMMENDED TOOLS......................................................................................................9

TECHNICAL SPECIFICATIONS................................................................................................................10

AUTHORIZATION.....................................................................................................................................10

MECHANIC SPECIFICATIONS..................................................................................................................11

ENVIRONMENTAL TECHNICAL SPECIFICATIONS.................................................................................11

INSTALLING CHARGE STATION.............................................................................................................12

1 - BOX CONTENTS FOR CHARGING STATION WITH SOCKET AND CABLE..........................12

2 - PRODUCT INSTALLATION STEPS.....................................................................................13

2.1 - OPENING THE COVER OF THE CHARGING STATION...................................13

2.2 - WALL MOUNT INSTALLATION........................................................................14

2.3 - SINGLE PHASE CHARGING STATION AC MAINS CONNECTION................17

2.4 - THREE PHASE CHARGING STATION AC MAINS CONNECTION...................18

2.5 - ADJUSTING CURRENT LIMITER....................................................................19

2.6 - DIP SWITCH SETTINGS..................................................................................20

2.6.1 - LOSS OF MASTER RFID CARD.................................................21

2.6.2 - DATA CABLE CONNECTION......................................................22

2.6.3 - EXTERNAL ENABLE INPUT FUNCTIONALITY..........................23

2.6.4 - LOCKED CABLE FUNCTION (Model with Socket).....................25

2.6.5 - POWER OPTIMIZER (REQUIRES OPTIONAL ACCESSORIES)...26

2.7 - LOAD SHEDDING.........................................................................................29

2.8 - MONITORING OF WELDED RELAY CONTACTS FAILURE...........................30

3 - OPEN RCD COVER..............................................................................................................32

SAFETY INFORMATION

CAUTION

RISK OF ELECTRIC SHOCK:

CAUTION: FINLUX PRO ELECTRIC VEHICLE CHARGER DEVICE SHALL BE MOUNTED BY A LICENSED OR

AN EXPERIENCED ELECTRICIAN AS PER ANY REGIONAL OR NATIONAL ELECTRIC REGULATIONS AND

STANDARDS IN EFFECT.

CAUTION

AC mains connection and load planning of the electric vehicle charging device

shall be reviewed and approved by authorities as speciﬁed by the regional

or national electric regulations and standards in effect. For multiple electric

vehicle charger installations the load plan shall be established accordingly. The manufacturer shall

not be held liable directly or indirectly for any reason whatsoever in the event of damages and risks

that are borne of errors due to AC mains supply connection or load planning.

IMPORTANT - Please read these instructions fully before installing or operating

SAFETY WARNINGS

• Keep this manual in a safe place. These safety and operating instructions must be kept in a

safe place for future reference.

• Check that the voltage marked on the rating label and do not use charging station without

appropriate mains voltage.

• Do not continue to operate the unit if you are in any doubt about it working normally, or if it is

damaged in any way - switch off the mains supply circuit breakers (MCB and RCCB). Consult

your local dealer.

• The ambient temperature range should be between –35 °C and +55 °C (–25°C and +50 °C for

RCCB equipped models: EVC04-AC***A-*) without direct sunlight and at a relative humidity

of between 5 % and 95 %. Use the charging station only within these speciﬁed operating

conditions.

• The device location should be selected to avoid excessive heating of the charging station. High

operating temperature caused by direct sunlight or heating sources, may cause reduction of

charging current or temporary interruption of charging process.

• The charging station is intended for outdoor and indoor use. It can also be used in public places.

• To reduce the risk of ﬁre, electric shock or product damage, do not expose this unit to severe

rain, snow, electrical storm or other severe weathers. Moreover, the charging station shall

not be exposed to spilled or splashed liquids.

• Do not touch end terminals, electric vehicle connector and other hazardous live parts of the

charging station with sharp metallic objects.

• Avoid exposure to heat sources and place the unit away from ﬂammable, explosive, harsh, or

combustible materials, chemicals, or vapors.

• Risk of Explosion. This equipment has internal arcing or sparking parts which should not be

exposed to ﬂammable vapors. It should not be located in a recessed area or below ﬂoor level.

• This device is intended only for charging vehicles not requiring ventilation during charging.

• To prevent risk of explosion and electric shock, ensure that the speciﬁed Circuit Breaker and

RCD are connected to building grid.

• The lowest part of the socket-outlet shall be located at a height between 0,5 m and 1,5 m

above ground level.

• Adaptors or conversion adapters are not allowed to be used. Cable extension sets are not

allowed to be used.

WARNING: Never let people (including children) with reduced physical, sensory or men-

tal capabilities or lack of experience and or knowledge use electrical devices unsupervised.

CAUTION: This vehicle charger unit is intended only for charging electric vehicles not

requiring ventilation during charging.

GROUND CONNECTION WARNINGS

• Charging station must be connected to a centrally grounded system. The ground conductor

entering the charging station must be connected to the equipment grounding lug inside the

charger. This should be run with circuit conductors and connected to the equipment grounding

bar or lead on the charging station. Connections to the charging station are the responsibility

of the installer and purchaser.

• To reduce the risk of electrical shock, connect only to properly grounded outlets.

• WARNING : Make sure that during installing and using, the charging station is constantly

and properly grounded.

POWER CABLES, PLUGS and CHARGING CABLE WARNINGS

• Be sure that charging cable is Type 2 socket compatible on charging station side.

• A damaged charging cable can cause ﬁre or give you an electric shock. Do not use this product

if the ﬂexible Charging cable or vehicle cable is frayed, has broken insulation, or shows any

other signs of damage.

• Ensure that the charge cable is well positioned thus; it will not be stepped on, tripped over,

or subjected to damage or stress.

• Do not forcefully pull the charge cable or damage it with sharp objects.

• Never touch the power cable/plug or vehicle cable with wet hands as this could cause a short

circuit or electric shock.

• To avoid a risk of ﬁre or electric shock, do not use this device with an extension cable. If the

mains cable or vehicle cable is damaged it must be replaced by the manufacturer, its service

agent, or similarly qualiﬁed persons in order to avoid a hazard.

WALL MOUNTING WARNINGS

• Read the instructions before mounting your charging station on the wall.

• Do not install the charging station on a ceiling or inclined wall.

• Use the speciﬁed wall mounting screws and other accessories.

• This unit is rated for indoor or outdoor installation. If this unit is mounted outdoors, the

hardware for connecting the conduits to the unit must be rated for outdoor installation and

be installed properly to maintain the proper IP rating on the unit.

DESCRIPTION

1 - MODEL DESCRIPTION

Model Name

MODEL DESCRIPTION: EVC04-AC**-*

EVC04 : Electric Vehicle AC Charger (Mechanical Cabinet04)

1st Asterisk (*) : Rated Power

7 : 7.4kW (1Phase Supply Equipment)

11 : 11kW (3Phase Supply Equipment)

22 : 22kW (3Phase Supply Equipment)

2nd Asterisk (*): 2nd asterisk can include combinations of the following

Blank : No RCCB

A : Charging unit with TypeA RCCB

E : Charging unit with EV / ZE Ready

Compliance

3rd Asterisk (*) : 3rd asterisk can be one the following

Blank : Case-B Connection with normal socket

T2S : Case-B Connection with shuttered socket

T2P : Case C Connection with Type-2 plug

T1P : Case-C Connection with Type-1 plug

T1PUL : Case-C Connection with Type-1 plug (UL Approved)

Cabinet EVC04

Table-1

2 - MODEL REFERENCES

Single

phase

Three

phase

Type 2

socket

output

Shut-

tered

type 2

socket

output

RCCB

Type-A

6mA

RCD

Type-2

Attached

Cable

Type-1

Attached

Cable

EVC04-AC7 x x x

EVC04-AC7A x x x x

EVC04-AC7A-T2P x x x x

EVC04-AC7A-T2S x x x x

EVC04-AC7A-T1P x x x x

EVC04-AC22 x x x

EVC04-AC22A x x x x

EVC04-AC22A-T2P x x x x

EVC04-AC22A-T2S x x x x

Table-2

GENERAL INFORMATION

1 - INTRODUCTION OF THE PRODUCT COMPONENTS

Socket Models Cable Models

7 8

Figure-1

en Socket Models

1- Status indicator LED

2- RFID Card Reader

3- Socket Outlet

4- Access cover for residual

current device

5- Product Label

6- Charging station supply inlet

gland nut

7- Charging station

communication cable gland nut

en Cable Models

1- Status indicator LED

2- Dummy Socket

3- Charging Plug

4- RFID Card Reader

5- Product Label

6- Charging station supply inlet

gland nut

7- Charging station

communication cable gland nut

8- Charging cable

2 - DIMENSIONAL DRAWINGS

315.0mm 135.0mm

460.0mm

Figure-2

3 - ELECTRIC VEHICLE CHARGING STATION EXPLODED PICTURE

3.1 - Cable Models

24568311121410

20 13

22 15

17 18

Figure-3

NO PART DESCRIPTION NUMBER NO PART DESCRIPTION NUMBER

1 Socket 1 14 RCCB Side Cover 1

2Status Information LED

Frame 1 15 RCCB Lock Bolt 1

3 Card Insulation Plate 1 16 Rear Cover 1

4 Cosmetic Label 1 17 Card Mount Metal Plate 1

5 Front Cover 1 18 Card Insulation Plate 1

6 Hinge 1 19 Cable Bush M32x1.5 2

7 Sealing Ring 1 20 Cable Bush M20x1.5 1

8 DC Sensor 1 21 Plastic Blind Flange 1

9 Rail Connection 2 22 Sealing Ring 1

10 Sealing Ring 1

11 RCCB Component 1

12 RCCB Lock Bolt 1

13 Sealing Ring 1

3.2 - Socket Models

Figure-4

NO PART DESCRIPTION NUMBER NO PART DESCRIPTION NUMBER

1 Socket 1 14 Brass Insert 8

2 Sealing Ring 1 15 Plastic Blind Flange 1

3 Cosmetic Label 1 16 Cable Bush M20x1.5 1

4Status Information LED

Frame 1 17 Plastic Blind M32X1.5 1

5 Cosmetic Label 1 18 Plastic Blind Flange 1

6 Front Cover 1 19 RCCB Lock Cylinder 1

7 Hinge 1 20 RCCB Lock Bolt 1

8 Card Mount Metal Plate 1 21 RCCB Side Cover 1

9 Card Insulation Plate 1 22 Rear Cover 1

10 Rail Connection 2

11 RCCB Component 1

12 RCCB Lock Bolt 1

13 Sealing Ring 1

REQUIRED EQUIPMENT, TOOLS and ACCESSORIES

1 - SUPPLIED INSTALLATION EQUIPMENT and ACCESSORIES

Dowels (M8x50 Plastic Dowels)

Torx T25 Security Screw (M6x75)

Torx T20 Security L-Wrench

Wrench*

Triangle Key*

Table-3

2 - RECOMMENDED TOOLS

Drill Bit 8mm Impact Drill Water Level

T25

Volt Indicator Torx T25 Security

Screwdriver Tester

Flathead Screwdriver (Tip

width 2.00-2.5 mm) Pointed Spudger Right Angle Screwdriver Adapter /

Torx T20 Security Bit

Table-4

Table des matières

Langues :

Manuels Chargeur de batteries populaires d'autres marques

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Manuel utilisateur

Enelion

Enelion Vertica Manuel utilisateur

RCA

RCA CHU6 Manuel utilisateur

ANSMANN

ANSMANN ALCT 6/24-10 Manuel utilisateur

Hitachi

Hitachi UC 18YRSL Guide de dépannage

Olympus

Olympus B-20 LPC Manuel utilisateur

Exibel

Exibel ZH1708143 Manuel utilisateur

Lenmar

Lenmar Mach 1 Manuel utilisateur

CTEK

CTEK MXS 5.0 Manuel utilisateur

ABB

ABB HT842379 Manuel utilisateur

Nitecore

Nitecore Superb Charger SC4 Manuel utilisateur

Renogy

Renogy RBC2125DS-21W Manuel utilisateur

Braun

Braun BWC02M Manuel utilisateur

CTEK

CTEK MXS 3.6 Manuel utilisateur

Black & Decker

Black & Decker BDV090 Manuel utilisateur

Trinity

Trinity DPD Manuel utilisateur

Hulkman

Hulkman Sigma 1 Manuel utilisateur

IKEA

IKEA koppla Manuel utilisateur