2.2 Electrical safety
The WaveAnalyzer 200A includes an AC/DC power brick to
charge the unit’s 4 18650 Li-ion batteries. The adaptor requires
single phase AC power, 100-240 V, 50/60 Hz and provides
output DC power, 24V, 2.5A to the WaveAnalyzer 200A via a
standard P1J DC plug. Maximum power consumption is 60 VA.
The AC/DC switching adaptor has a C14 power inlet, and
requires a C13 power cable to connect the instrument to an
appropriate power socket (supplied), so that the cable earths
the supplied power brick.
To avoid the possibility of injury or death, observe the following
precautions before switching on the instrument.
Connect the power cable to a power outlet with a
protective earth contact
Do not negate this protective action by using an
extension cord or power block without a protective earth
conductor
Do not interrupt the protective earth connection
intentionally
Do not block or hinder access to the instrument power
inlet or power cable plug.
Do not open the instrument enclosure. The instrument
contains no user-serviceable components. Component
replacement and internal adjustments must be made
only by qualified Finisar service personnel
A WaveAnalyzer chassis that appears damaged or
defective should be made inoperative and secured
against unintended operation until it can be repaired by
qualified Finisar service personnel
A defective, damaged or malfunctioning WaveAnalyzer
must be returned to Finisar for repair. Please contact
Finisar before shipping any unit with mechanical
safe handling of a unit with possible Lithium Ion battery
damage.