Fifine K651 Manuel utilisateur
2
English
3 –18
Čeština
19 –34
Slovenčina
35 –50
Magyar
51 –66
Deutsch
67 –82
Français
83 –98
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
4
WHAT´S IN THE BOX?
1. Dynamic Microphone
2. Desktop Boom Arm
3. 3/8” to 5/8” Adapter
4. Threaded Metal Ring
5. Desk Clamp
6. 2.5m USB C to USB Cable (For Mic)
7. 2.5m USB C to USB Cable (For Shock Mount)
8. Shock Mount
9. User´s Manual
5
PRODUCT DESCRIPTION
TIPS: The RGB lighting could be changed by the button on the shock mount. Each press
to change the light from colorful to green, red, dark blue, yellow, light blue, purple and
white. The shock mount has no power-off memory. You need to manually set and select
the color you like when you power on it again.
INSTALL MICROPHONE STAND ON TABLE
Microphone
Capsule
Mute Button
USB C Output
For Microphone
For Shock Mount
LED Indicator
RGB Button
USB C Output
RGB lighting
6
•Screw the lower part of the desk clamp until it is tight and secure.
•Insert the boom arm (the end without screw) into the hole of desk clamp.
•Tighten the screw.
•Screw the shock mount to the boom arm via the included adapter.
TIPS:
•Mount to your desktop via the included desk clamp accurately:
Unscrew the desk clamp and slide it over the side of your desktop, making sure that
both the top of the desk clamp and the underside are resting on flat surfaces. Overly
rounded or overhanging desktop edges do not make good mounting surfaces.
•DON´T rotate the boom arm when the screw on the desk clamp is tightened.
Loose the screw first, adjust the position of the arm, and the tighten it.
INSTALLATION QUICK GUIDE
Place the mic through the hold, then tighten the metal ring on the bottom of the shock
mount. Tips: The side with a red warning sticker should be up.
7
Tightly plug the provided USB cable into the USB output at the bottom of the
microphone. Plug the USB A connector to the USB port of your computer.
Tightly plug the other USB cable into the shock mount. And plug the USB A connector to
the USB port on your computer.
This is a unidirectional end-addressed dynamic mic. Please keep the top of the mic
facing the audio source. The best range is 2 to 4 inch.
8
MUTE BUTTON
Tap the button to mute/unmute the mic.
Make sure the LED light is white when you are going to use the mic.
COMPUTER SETUP
Apple MAC OS
•Plug the free end of the provided USB cable into the USB port on your computer.
The smile light will turn white, indicating the mic is powered. Your computer will
automatically recognize the USB device and install a driver. There may be no pop-
up window or message though.
•To select the AmpliRocket as your audio, first, open your System Preferences.
•Next, click Sound to display the Sound preference pane.
Red = Microphone is muted
White = Microphone is on
9
•Click the input tab and make certain “FIFINE MICROPHONE” is selected as the
default input device. Drag progress bar to adjust volume of input.
TIPS:
•If you want to monitor your voice when using Macbook, you must turn on any
recording software first (Audacity for example), make sure to click “Software
Playthrough(on)”, then click the record button to begin, otherwise you can not
hear any sound when you speak to the mic.
•Choose the default Dictation&Speech software when you use the speech to text
in Macbook, click "On" under Dictation window, so that your microphone can be
recognized by the software.
10
•If you’re your MAC only has USB C port, you will need a genuine Apple USB-C to
USB female adapter for connection. And pls plug the USB adapter into your Mac
first, the connect the mic with the adapter.
Windows
Plug the USB cable into your computer and the smile light will be white, indicating the
mic is powered on. Please wait for a few seconds when first time operation, since driver
of microphone takes time to automatically install. There may be no pop-up window or
message though. (If plugging USB plug in a different USB port, driver installs again).
After installation, you can test the mic by speaking to it. If the mic picks up no sound,
please follow procedures below.
•Right-click the speaker icon at the bottom right of the screen. Click “Sounds”
•Click the Sound control panel.
(Not included)
Table des matières
Langues :
Autres manuels Fifine Microphone
Fifine
Fifine K669 Manuel utilisateur
Fifine
Fifine K669B Manuel utilisateur
Fifine
Fifine K726 Manuel utilisateur
Fifine
Fifine K670 Manuel utilisateur
Fifine
Fifine K658 Manuel utilisateur
Fifine
Fifine K025 Manuel utilisateur
Fifine
Fifine AMPLIGAME A8 PLUS Manuel utilisateur
Fifine
Fifine K669B Manuel utilisateur
Fifine
Fifine T683 Manuel utilisateur
Fifine
Fifine K720 Manuel utilisateur
