Festo MPA-ASI-VI Manuel utilisateur

Manual

pneumatics MPA-S

Valve terminal with

MPA-S pneumatics

Type:

MPA-FB-...

MPA-CPI-...

MPA-MPM-... and

MPA-ASI-...

Manual

534 241

en 1108e

[750 435]

MPA-S Valve Terminal

Contents and general instructions

Festo P.BE-MPA-EN en 1108e

Original de.......................................

Edition en 1108e..................................

Designation P.BE-MPA-EN...........................

Order no. 534 241.................................

Internet: http://www.festo.com

E-Mail: service_international@festo.com

The reproduction, distribution and utilization of this

document as well as the comunication of its contents to

others without express authorization is prohibited.

Offenders will be held liable for the payment of damages.

utility module or design.

Contents and general instructions

II Festo P.BE-MPA-EN en 1108e

Contents and general instructions

III

Festo P.BE-MPA-EN en 1108e

Contents

Intended use VII..........................................................

Range of application and certifications VII.....................................

Target group VIII..........................................................

Service VIII...............................................................

Instructions on this manual IX..............................................

Important user instructions X..............................................

1. Summary of components 1-1........................................

1.1 The MPA-S valve terminal 1-3........................................

1.2 Overview of variants 1-4.............................................

1.2.1 Electrical variants 1-4.......................................

1.3 Valve terminal design 1-8............................................

1.4 Description of components 1-9.......................................

1.4.1 Sizes 1-14..................................................

1.4.2 Valves 1-14.................................................

1.4.3 Pressure sensor plate 1-17....................................

1.4.4 Pneumatic supply plate 1-18..................................

1.4.5 Electrical supply plate 1-18....................................

1.4.6 Pressure zone separation 1-18.................................

1.4.7 Vertical stacking 1-23........................................

1.5 Operation and connection elements 1-33................................

1.5.1 Manual override (MO) 1-34....................................

1.6 Display components 1-37.............................................

1.6.1 Pressure sensor plate 1-39....................................

1.6.2 Proportional-pressure regulator 1-40............................

1.6.3 Proportional-pressure regulator with LCD display 1-41.............

Contents and general instructions

IV Festo P.BE-MPA-EN en 1108e

2. Fitting 2-1........................................................

2.1 General instructions on mounting and dismounting 2-3...................

2.2 Mounting variants 2-4..............................................

2.2.1 Mounting/dismounting on H-rails 2-5..........................

2.2.2 Mounting/dismounting on walls 2-9...........................

2.2.3 Standard fastening points of the valve terminal 2-10...............

2.2.4 Additional fastening of the valve terminal 2-11....................

2.3 Mounting/removing the inscription label holder 2-13......................

3. Installation 3-1...................................................

3.1 Compressed air preparation 3-3......................................

3.1.1 Operation with unlubricated compressed air 3-3.................

3.1.2 Operation with lubricated compressed air 3-4....................

3.2 General instructions on installation 3-6................................

3.3 Connecting the MPA-S valve terminal 3-8...............................

3.3.1 Pilot control (pilot air supply) 3-8..............................

3.3.2 MPA-S valve terminal with pressure zone separation 3-10...........

3.3.3 Operation of the MPA-S valve terminal with

reversible pressure regulators 3-12.............................

3.3.4 Setting the pressure regulating valve 3-12.......................

3.3.5 Controller with rigid threaded connection (MPA1) 3-16.............

3.3.6 Vacuum/low pressure operation 3-16...........................

3.3.7 Connecting the pneumatic lines 3-19............................

3.4 Installing the tubing 3-22.............................................

3.4.1 Common pneumatic lines 3-24.................................

3.4.2 Connecting the electric cables 3-25.............................

3.5 Address assignment of the valves 3-30..................................

3.5.1 MPA-S valve terminal with CPX terminal 3-30.....................

3.5.2 MPA-S valve terminal with CPI module or AS-Interface 3-32..........

3.5.3 MPA-S valve terminal with multi-pin plug connection 3-32...........

Contents and general instructions

Festo P.BE-MPA-EN en 1108e

4. Commissioning 4-1................................................

4.1 General instructions 4-3.............................................

4.1.1 Before commissioning 4-3....................................

4.1.2 Pressure build-up in the overall supply 4-4......................

4.2 Manual override (MO) 4-6...........................................

4.3 Checking the valves and the valve/actuator combination 4-8...............

4.4 Fitting/removing the manual override caps (optional) 4-13.................

4.5 LED display of the valves 4-15.........................................

4.6 Commissioning instructions for the proportional pressure regulator 4-18......

4.7 Fault finding 4-20...................................................

4.7.1 Impairment of function 4-20...................................

4.7.2 Operating states of the pneumatic system 4-22...................

5. Maintenance and conversion 5-1.....................................

5.1 General instructions 5-3.............................................

5.2 Dismantling the MPA-S valve terminal 5-4..............................

5.3 Maintenance of the MPA-S valve terminal 5-5...........................

5.3.1 Cleaning the flat plate silencer 5-5.............................

5.3.2 Replace the flat plate silencer or the exhaust plate 5-6............

5.3.3 Replacing valves or blanking plates 5-6.........................

5.3.4 Replace the proportional pressure regulator 5-9.................

5.3.5 Replacing electronics modules 5-10.............................

5.3.6 Replacing the sub-base, supply plate or MPA-S end plate 5-18.......

5.3.7 Replacing the interlinking boards 5-21...........................

5.4 Converting the MPA-S valve terminal 5-25...............................

5.4.1 Conversion to internal or external pilot air supply 5-25.............

5.4.2 Converting the MPA-S valve terminal to different pressure zones 5-30.

5.4.3 Adding valve positions 5-34...................................

5.4.4 Adding an electrical supply plate (only for MPA-S valve terminal

with CPX terminal or CPI interface) 5-38..........................

5.4.5 Adding a pressure sensor plate 5-40............................

5.4.6 Adding a proportional pressure regulator 5-41....................

Contents and general instructions

VI Festo P.BE-MPA-EN en 1108e

A. Technical appendix A-1.............................................

A.1 Technical data A-3..................................................

A.1.1 Product key A-20............................................

A.2 Festo accessories A-20...............................................

B. Supplementary component summary B-1..............................

B.1 Overview of valve position components B-3.............................

B.2 Separating the MPA-S valve terminal from the CPX terminal B-13............

C. Index C-1.........................................................

Contents and general instructions

VII

Festo P.BE-MPA-EN en 1108e

Intended use

The MPA-S valve terminals documented in this manual are

intended for installation into a machine or automated system.

The user must at all times observe the safety regulations

specified in this manual as well as the instructions concerning

the designated use of the relevant MPA-S valve terminal. The

MPA-S valve terminals may only be used as follows:

– as intended in an industrial environment

– in original status without unauthorised modifications.

Only the conversions or modifications described in the

documentation accompanying the product are permitted.

– in perfect technical condition.

When commercially available components, such as actuators,

are connected, the specified limits for pressures,

temperatures, electrical data, torques etc. must be

maintained. Comply with the regulations of the trade

associations and the German Technical Control Board (TÜV)

and the VDE conditions or relevant national regulations.

Range of application and certifications

The product fulfils the requirements of the EU directives and

is marked with the CE marking symbol.

Standards and test values, which the product observes and

fulfils, can be found in the section “Technical data”.

The product-relevant EU directives can be found in the

declaration of conformance.

Contents and general instructions

VIII Festo P.BE-MPA-EN en 1108e

Certain product configurations have been certified by the

Underwriters Laboratories Inc. (UL) for the USA and Canada.

These configurations are marked as follows:

UL Recognized Component Mark for Canada and the United

States

Only for connection to an NEC Class 2 supply.

Raccorder Uniquement a un circuit de Classe 2.

Note

Observe the following if the UL requirements are to be

complied with in your application:

– Rules for observing the UL certification can be found in

the separate UL-specific documentation. The relevant

technical specifications listed there also apply here.

– The technical data in this documentation may show

values deviating from this.

Target group

This manual is directed exclusively toward technicians trained

in control and automation technology.

Service

Please consult your local Festo repair service if you have any

technical problems.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Festo bornier

Festo

Festo CPV..-DI01 series Manuel de la liste des pièces

Festo

Festo CPV GE-IB-8 Series Manuel utilisateur

Festo

Festo CPV-SC-DP Manuel de la liste des pièces

Festo

Festo VTSA Series Manuel utilisateur

Festo

Festo VABM-B10-30E Series Manuel utilisateur

Festo

Festo MPA Series Manuel utilisateur

Festo

Festo CPV -GE-ASI-8E8A-Z Series Manuel utilisateur

Festo

Festo MPAL-VI Manuel utilisateur

Festo

Festo VIFB9-02 Series Manuel utilisateur

Festo

Festo CPV GE-IL Series Manuel de la liste des pièces

Festo

Festo CPVSC1-EPR Series Manuel utilisateur

Festo

Festo CPX-AB-2-M12-RK-IB Manuel utilisateur

Festo

Festo CPX-FB33 Instructions d'utilisation et d'installation

Festo

Festo CPA VI Series Manuel utilisateur

Festo

Festo VTSA Series Instructions d'utilisation et d'installation

Festo

Festo VIFB-02- Series Manuel utilisateur

Festo

Festo CPV -GE-ASI-8E8A-Z Series Manuel de la liste des pièces

Festo

Festo CPV GE-IB-8 Series Manuel utilisateur

Festo

Festo CPE PRS Series Manuel utilisateur

Festo

Festo CPV GE-ASI-4E4A-Z-CE Series Manuel utilisateur

Festo

Festo CPV GE-CO2-8 Series Manuel utilisateur

Festo

Festo VTSA-ASI 4E4A-Z Series Manuel utilisateur

Festo

Festo CPX-AB-2-M12-RK-IB Manuel utilisateur

Festo

Festo VABM-B10-30E Series Manuel utilisateur

Manuels bornier populaires d'autres marques

Russound

Russound EZB-1SC Manuel utilisateur

Siemens

Siemens MOBY FC 56 Manuel de la liste des pièces

Panasonic

Panasonic TY-FB8TA Manuel utilisateur

NI SCXI-1379 Manuel utilisateur

ABB

ABB ZLS924 Guide de l'utilisateur

Stahl

Stahl 8146/2 Manuel utilisateur

Crestron

Crestron CLT-1FAN4 Manuel utilisateur

Sony

Sony CBX-H11 Manuel utilisateur

Hubbell

Hubbell BASETRAK PB2 Series Manuel utilisateur

Crestron

Crestron CLT-2DIM2 Manuel utilisateur

Omron

Omron XW2B-40J6-2B Mode d’emploi

Lenz

Lenz XpressNet Digital plus LA152 Manuel du propriétaire

National Instruments

National Instruments BNC-2120 Manuel utilisateur

Autonics

Autonics ABS Series Manuel utilisateur

National Instruments

National Instruments VXI-TB-196 Manuel utilisateur

Crestron

Crestron CLT-4HSW4 Manuel utilisateur

Siemens

Siemens SINAMICS G130 Manuel utilisateur

National Instruments

National Instruments TBX-68S Manuel utilisateur