Festivo CM Manuel utilisateur

Refrigerators, freezers and wine storage appliances

Installation and operating manual

Rev 062023

Rev 082023

3EN

Table of contents

Table of contents 3

Intended use 4

Models 4

Acceptance 4

Before using the appliance 4

Precautions 5

Installation 6

Operation principle of the appliance 14

Switches and thermostats: refrigerator and freezer 14

Switches and thermostats: wine storage appliance 15

Switching on 15

Switching off 16

Temperature adjustment: refrigerator and freezer 16

Button lock and unlock 17

Freezing 17

Temperature adjustment: wine storage appliance 17

Normal sounds of the appliance 19

Automatic defrosting 19

Storing goods 20

Cleaning 24

User maintenance 28

Malfunctions and repairing small faults 29

Error messages 30

Service 31

Warranty conditions 32

Decommissioning the appliance 32

Notes 33

Intended use

Festivo refrigeration appliances are suited to refrigerating and freezing

food. The appliances are intended for domestic use. For institutional use,

regulations concerning the sector should be considered.

Festivo refrigeration appliances have been designed and tested in

accordance with the rules and regulations in force.

Festivo refrigeration appliances can be serviced only by an authorized

service center. Repairs by unqualiﬁed persons can endanger the user of the

appliance or the environment.

Models

Appliance models in the operating instructions are: refrigerator, freezer, refrigerator freezer, and wine storage

appliance. The refrigerator comes with a FRUIT AND VEGETABLE drawer, and the freezer has a ZERO drawer as

standard equipment.

Note!

The equipment and accessories in the instruction manual pictures are not necessarily standard

equipment of the appliance(s).

Acceptance

Check the appliance before accepting it. In case you detect damages in transit to the appliance please note it

down into the transport document, and inform the shipment company and seller immediately.

Note!

The manufacturer’s warranty does not cover damages in transit!

Before using the appliance

Read the installation and operating manual carefully. It includes important information about the installation, use

and maintenance of the appliance.

Do not start to use the appliance immediately after transportation or after it has been kept in a cold place, but let

it stand in its ﬁnal location for a few hours so that the oil has time to ﬂow down into the compressor.

Refrigerator CM Freezer FM Refrigerator freezer CFM

(consists of separate appliances)

Wine storage appliance

VLM

5EN

Precautions

The appliance must be attached to the wall (A) on the top of the cabinet or

prevent the appliance of falling over in another manner. If the angle plate

does not reach the wall use a suitable connecting piece for it.The wall

mounting screw and plug Ø 6 mm (B) are taped to the inside of the device.

Before cleaning, turn off the appliance from the power switch and unplug it

from the socket.

Leave the doors open when the appliance is not in use.

Alcoholic substances and conserves containing alcohol e.g. gherkins, pickled

beetroot and lingonberry puree must be stored upright in a tightly sealed

container.

Do not store opened sparkling wine bottles in the door locker, because of

the movement of opening the door can loosen the bottle cork with a lot of

pressure and it can cause damage with its trajectory.

Do not store glass bottles with freezing liquids in the freezer. The bottle can

break. Do not store explosive substances in the refrigerator freezer.

Warning!

It is not allowed to install the appliance in a space that is too small because of possible leakage of

refrigerant forming an explosive mixture of gas. The room size should be at

least 8 m².

The appliance contains a small amount of environmentally friendly but ﬂammable refrigerant R600,

which does not damage the ozone layer or cause greenhouse effect. Check

the refrigerant piping for damages in transit or during installation. Leaking

refrigerant can injure eyes or ignite.

When noticing a refrigerant leakage:

• do not let open ﬁre into the room

• turn off power to the appliance from the main switch

• unplug the appliance from the socket

• air the room for several minutes

• contact the Festivo service center

Note!

Keep the air circulation vents free of obstacles both up and down.

Do not use mechanical tools to speed up melting the ice or other than recommended methods by the

manufacturer.

Do not damage the refrigerant piping.

Do not use any electrical equipment inside the refrigerator freezer unless it is recommended by the manufacturer.

The refrigerator freezer must be fastened to a wall following instructions on page 4.

Installation

PLACEMENT

The intended environmental temperature classiﬁcation has been indicated on the appliance nameplate. The

nameplate is situated on the right inner wall of the refrigerator.

Place the appliance in a dry and well ventilated room with a size of at least 8 m².

Do not place the appliance in the immediate proximity of a radiator, stove, or an other heat source.

Proper functioning of the refrigerator engine requires a good air circulation.The air circulation vent at the front of

the appliance should not be covered.

Note!

Manufacturer’s warranty does not cover damages that are caused by faulty installation. Check that

the cooling air circulation meets at least the instruction requirement.

The placement ﬂoor must be even, horizontal, and at the same level with the ﬁnished ﬂoor.

Frost, that is formed in the refrigerator evaporator, will be defrosted automatically by the appliance. Melt water is

lead to an evaporation dish in the compressor space. Water evaporates from the evaporation vessel automatically.

In the case of a malfunction of the unit some water can be spilled onto the ﬂoor.

Note!

Always place a safety container under the unit.

If the refrigeration assembly includes several appliance modules, install a module wide safety container under

each unit. The picture shows an example of a 120 CFM refrigerator freezer safety container assembly. The safety

container is available as additional equipment.

Alternatively, the location of the refrigerator freezer can be made watertight in other ways. A watertight base

will be raised up onto the wall so that the possible leakage water cannot enter the structure via the ﬂoor or wall

joints.

SN +10 ... +32 °C

N +16 ... +32 °C

ST +18 ... +32 °C

T +18 ... +43 °C

7EN

Check that the plastic evaporation basin on top of the compressor is

properly in place. Move the dish to its position if it has been misplaced in

transit.

Other furniture should not be fastened to the refrigerator freezer. One

should be able to pull it out for cleaning and maintenance.

INSTALLATION DISTANCES FROM OTHER DEVICES AND SURFACES

Note!

For more detailed installation dimensions and methods, see a separate installation manual that can be

downloaded address www.festivo.ﬁ the product information of the device in question.

The refrigerator freezer can be placed touching the surfaces on the back and sides. In case the Festivo appliance’s

side surface is next to another cooling unit or outer wall, a ventilation gap of 10 mm width should be left in

between the surfaces.

If the appliance is installed next to a wall it should be off the wall with at least 35 mm gap, so that the door

opens sufﬁciently and the drawers can slide freely out from inside the cabinet.

When opening, the door corner crosses the outside line of the device. If the front surface of the door of the

appliance is on the same level as the outer surface of the cabinet, leave a minimum gap of 5 mm between the

hinge side of the appliance and the cabinet.

If a full deep upper cabinet is installed above the appliance, at least 40 mm of empty air circulation shall be left

between the appliance and the upper cabinet (1). If the top cabinet is immediately above the appliance, at least

80 mm of empty space shall be left behind and above the cabinet (2). There must be at least 80 mm of empty

space between the freestanding device and the ceiling of the room (3).

1. 2. 3.

ELECTRICAL CONNECTIONS

Connect the refrigerator and freezer power cords and both refrigerator freezer power cords to a single phase

230 V 50 Hz socket. The socket fuse size is 10 A.

Only a electrician is allowed to make changes to the plugs change the power cord.

A suitable socket is a socket on the back surface at a height of 2060 mm measured from the ﬂoor surface until

the bottom edge of the socket. The socket can be in the ceiling at similar height and at a maximum of 500 mm

from the back wall.

The socket must be positioned in such a way that it is possible to pull the appliance’s plug from the socket

without having to move it.

The extra power cord cannot be pushed behind the furniture into the condeser space but it has to be left on top

of the refrigerator freezer.

Due to danger of overheating the appliance should not be connected to the power grid by means of a branch

outlet or an extension cord.

BALANCING AND LOCKING THE WHEELS: REFRIGERATOR, FREEZER AND WINE STORAGE APPLIANCE 45 VLM

Please check that the wheel locking screws

C of are open.

Push the appliance to its place. Install it

to the same level as the rest of the ﬂoor

surface.

Straighten the appliance with the adjusting

screws A (2 pcs) and tighten the locking

screws C. The work requires a 10 mm

spanner.

If the appliance tilts towards the back

even if the adjusting screws A have been

completely loosened it’s necessary to place

sheet material under the back wheels to

heighten the back edge.

120 cm wide appliances:

Turn the adjusting foot in the middle in such a way that it touches the ﬂoor.

INSTALLING FRONT PANEL OF THE PLINTH

Mount the front panel of the plinth to its place. The front panel

is attached to the plinth with two fasteners B (2 pcs). When you

have pressed the front panel in its place, lift it upwards as far as it

lifts.

FALL PREVENTION

Fasten the furniture to the wall with the angle plate on top of the

cabinet and prevent otherwise the appliance from falling over by

accident.

9EN

CONNECTING APPLIANCE COMBINATIONS OF 100 CFM AND 120 CFM TO EACH OTHER

EXTENSION ACCESSORY PACKAGE INCLUDES:

(additional equipment to individually sold

modules of 55 CM, 75 CM, 45 FM and 45 VLM)

1. Aluminum proﬁle for in between the

frames

2. Support strips for the top

3. Ceiling fastener

4. Plinth fasteners

5. Screws 4.2 and M6

Unpack the packages next to mounting location.

Adjust the appliances to a horizontal position (see

chapter ‘Balancing and locking the wheels’) and

fasten them to each other.

The frames will be attached to each other from the top (2, 3), front plinth (4)

and back plinth (4). An aluminum proﬁle cover will be installed in between the

appliances (1).

BACK PLINTH FASTENER (4)

Mount the plinth fastener to the lower edge of the plinth. Fasten the 4.2 drill

screws to the holes on the back edge and tighten the joint from both sides

evenly with M6 screws.

CEILING FASTENER (3) AND FRONT EDGE ALUMINIUM PROFILE FOR INBETWEEN THE FRAMES (1)

First install the support lists (2) on the

roof of the appliance under the top

lids and press the ceiling fastener (3)

against the ceiling.

Push the appliance to its place. Check

that the front surfaces of the frame

are on the same level.

Remove the protective tapes (1b) of

the sealing band on the aluminium

proﬁle and ﬁrst press

the top of the proﬁle into place (1).

Finally, press the aluminium proﬁle

tightly along its entire length against the front surface of the frame.

Fasten the ceiling fastener (3) 4.2 with screws (6 pcs) to the

mounting holes.

BALANCING AND LOCKING THE WHEELS

Adjust the appliances to the same level with

adjustment screws A and fasten the wheel locking

screws C. The work requires a 10 mm spanner.

FRONT PLINTH FASTENER (4)

Mount the plinth fastener to the lower edge of the

plinth. Fasten the 4.2 screws (a) to the holes on the

front edge and tighten the joint from both sides evenly

with M6 screws (b).

Mount the front panel of the plinth to its place.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Festivo Réfrigérateur

Festivo

Festivo CITYCOLD 072023 Manuel utilisateur

Festivo

Festivo Cooling Cabinet / Freezer Combination Manuel utilisateur

Festivo

Festivo 75 CFO Manuel utilisateur

Manuels Réfrigérateur populaires d'autres marques

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuel utilisateur

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuel utilisateur

Sharp

Sharp SJ-BA31IEXW2-EU Manuel utilisateur

CORBERO

CORBERO CC2300MCW Manuel utilisateur

KitchenAid

KitchenAid 2205264 Manuel utilisateur

Stengel

Stengel KU 1101 A++ Manuel utilisateur

NEFF

NEFF KI181 Series Manuel utilisateur

Hoshizaki

Hoshizaki Reach-In Manuel utilisateur

Amana

Amana ASD2524VES00 Manuel utilisateur

BOMANN

BOMANN KGC 213 Manuel utilisateur

Danby

Danby DAR044A1SLDD Instructions de montage

Samsung

Samsung RF323TE Manuel utilisateur

Beko

Beko CSA31022 Manuel utilisateur

IKEA

IKEA FROSTIG C 185 E Manuel utilisateur

Electrolux

Electrolux ER 6821 D Manuel utilisateur

True

True TS-28 Manuel utilisateur

Frigidaire

Frigidaire FSC23R5DW9 Manuel utilisateur

Beko

Beko LSP4579W Manuel utilisateur