Page 2of 18
FERRO MAGNETICS CORPORATION INDUSTRIAL CHARGER WARRANTY
For Q and Q2 High Frequency Industrial Battery Chargers
This Warranty Agreement entered into between Ferro Magnetics Corporation, "Ferro", and the Original End User is with respect to Ferro
Magnetics Corporation motive power battery charger product lines as stated above, for industrial electrical truck battery charging usage.
1.0 GENERAL: Ferro Magnetics Corporation (hereinafter called "Ferro") warrants that each new industrial battery charger supplied by
it, is of good workmanship and is free from any inherent mechanical defects, provided:
1.1 The product is installed and operated in accordance with generally accepted industrial standards and in accordance with the printed
instructions supplied with the charger.
1.2 The charger is used under conditions for which it was designed and is not subject to misuse, negligence or accident.
1.3 The charger receives proper care, protection, and maintenance under supervision of competent personnel.
1.4 The charger is used within the published performance rating for the unit involved.
1.5 The charger is used exclusively by the original end-user and by no other persons.
2.0 PERSONS COVERED: The charger is fully warranted for 3 years from the date of shipment by Ferro to the original end user, with
the following exceptions:
2.1 Power transformer is warranted for an additional 5 years parts only F.O.B. St. Louis, MO.
2.2 Primary switch contacts, fuses, bulbs, and filters are not warranted unless found to be defective prior to use.
3.0 LIMITATION OF REMEDY Any claimed defect is subject to Ferro's inspection and judgment, after the original user at its expense
has returned the defective product to Ferro Magnetics Corporation, St. Louis, MO.
3.1 Ferro's liability is limited to the repair of the defect or, at Ferro's option, the replacement of the defective parts. During the 3-year
warranty period, Ferro will bear all freight, (within the contiguous 48 states) parts, and labor costs per published warranty rate schedule
of such repair or replacement. During the last 5 years of the warranty on power transformers, Ferro will bear the cost of replacement
parts only; no labor or other services will be provided by Ferro. Ferro shall not be obligated to reimburse the original end user or any
other person for any work performed.
3.2 Replacement parts will be warranted for the remainder of the original warranty period as defined above, or for 30 days; whichever is
greater.
3.3 Ferro shall not be liable for direct or indirect, special or consequential damages in excess of such repair or replacement. In no event
shall the original end user be entitled to recover for contingent expenses resulting from, but not limited to, telephone calls, telegrams,
travel expenses, lodging, duties and taxes, labor, rental of replacement equipment, loss of business or profits or other commercial losses.
4.0 USE OF DEFECTIVE PRODUCT: Continued use of a defective charger after discovery of a defect will void all warranties.
5.0 REPAIRED EQUIPMENT: Except as authorized in writing, this warranty does not cover any equipment that has been repaired by
any party other than an authorized Ferro service agent.
6.0 MODIFIED EQUIPMENT: This warranty is void if this equipment has been modified without written permission from Ferro
Magnetics.
7.0 NOT COVERED: Failure due to imbalance of incoming A/C line, line harmonics (distortion) or disconnecting the charger while
under load will not be covered.
EXCEPT AS STATED ABOVE, ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
EXCLUDED AND ORIGINAL END USER ASSUMES ALL RISK AND LIABILITY RESULTING FROM USE OF THE PRODUCT.
FERRO NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR FERRO ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE OR USE OF THE PRODUCT AND THERE ARE NO ORAL AGREEMENTS OR WARRANTIES
COLLATERAL TO OR AFFECTING THIS WRITTEN WARRANTY.
FM_WAR_0712_QHF
