Ferno F2 Manuel utilisateur
© Ferno-Washington, Inc. / 234-3648-00 / December 2016 1
F2 Backrest Adjusting Lever
Kit 090-5996
Description
This kit includes a backrest adjusting lever for use with the F2 Monobloc
Ambulance Cot.
This manual includes parts and instructions for removing and installing
a backrest adjusting lever.
Tools Required Qty.
5 mm Hex Wrench 1 ea.
10 mm Open End Wrench 1 ea.
Parts Supplied Qty.
Backrest Adjusting Lever 1 ea.
Spring 1 ea.
Screw 1 ea.
Washer 2 ea.
Lock Nut 1 ea.
WARNING
Improper installation and use of the kit can cause injury.
Install and use the kit only as described in this manual.
Improper parts and service can cause injury. Use only
Ferno parts and Ferno-approved service on the product.
Modifying the kit can cause injury and damage. Use the
kit only as designed by Ferno.
Backrest
Adjusting
Lever
Spring
Washer (2)Lock Nut
Screw
Backrest Adjusting Lever
© Ferno-Washington, Inc. / 234-3648-00 / December 2016
F2 Backrest Adjusting Lever Kit
2
Removing the Backrest Adjusting Lever
1. Raise the backrest to its highest position.
2. Using the 5 mm hex wrench and the 10 mm open end wrench,
remove and discard the backrest adjusting lever, spring, screw,
washers and lock nut (Figure 1).
Removing the Backrest Adjusting
Lever
Compress the lever against the backrest tube
to relieve tension. This helps with removing the
screw.
1
Screw
Washer
Spring
Washer
Lock Nut
Backrest
Adjusting Lever
3
Backrest Tube
Handle
Spring
Installing the New Backrest Lever
1. Insert the 90 degree leg of the spring into the backrest adjusting
lever (Figure 2). The long end of the spring is held by the slot.
2. Hold the spring in place. Compress the long end of the spring
against the backrest tube and align the screw holes.
3. Place the lever assembly into the mount (Figure 3). Hold in place
as you complete step 4.
2
Spring
Backrest
Adjusting Lever
Slot
Installing the Backrest Adjusting
Lever
Start high in the backrest tube bracket, then
slide down.
Use an assistant as necessary.
F2 Backrest Adjusting Lever Kit
© Ferno-Washington, Inc. / 234-3648-00 / December 2016 3
4
Screw
Washer
Washer
Lock Nut
4. Place a washer on the screw and insert the screw through the
lever assembly as shown in Figure 4.
5. Place the second washer on the other end of the screw and thread
the lock nut (Figure 4).
6. Tighten the screw and lock nut.
7. Check the function of the new backrest adjustment lever. Conrm
the backrest can be adjusted to each locking position.
Limited Warranty Statement
The products sold by Ferno are covered by a limited warranty, which
is printed on all Ferno invoices. The complete terms and conditions of
the limited warranty, and the limitations of liability and disclaimers,
are also available upon request by calling Ferno at 1.800.733.3766 or
1.937.382.1451.
Repairs or Parts
EMSAR®is the only organization authorized by Ferno
to manage, service, and repair Ferno products.
Telephone (Toll-free) 1.800.73.EMSAR
Telephone (Worldwide) 1.937.383.1052
Fax (Worldwide) 1.937.383.1051
Internet www.EMSAR.com
Ferno Customer Relations
For ordering assistance or general information:
CANADA AND THE U.S.A.
Telephone (Toll-free) 1.877.733.0911
Telephone 1.937.382.1451
Fax (Toll-free) 1.888.388.1349
Fax 1.937.382.1191
Internet www.ferno.com
ALL OTHER LOCATIONS
For assistance or information, please contact your Ferno distributor.
If you do not have a Ferno distributor, please contact Ferno Customer
Relations:
Ferno-Washington, Inc., 70 Weil Way
Wilmington, Ohio 45177-9371, U.S.A.
Telephone +1.937.382.1451
Fax +1.937.382.6569
Internet www.ferno.com
1.937.382.1451
44 (0) 1274 851999
Autres manuels pour F2
1
Autres manuels Ferno Équipement médical
Ferno
Ferno SCOOP EXL Stretcher Mode d'emploi
Ferno
Ferno CHI Manuel utilisateur
Ferno
Ferno Mobile Transporter 35A Series Manuel utilisateur
Ferno
Ferno 24 MAXX Manuel utilisateur
Ferno
Ferno EZ Glide 59-T Manuel utilisateur
Ferno
Ferno 28-Z PROFlexx Manuel utilisateur
Ferno
Ferno PEZO2 Manuel utilisateur
Ferno
Ferno Viper Stretcher Manuel utilisateur
Ferno
Ferno PROFlexX Manuel utilisateur
Ferno
Ferno 50-E Manuel utilisateur
Ferno
Ferno CCT Six - M Manuel utilisateur
Ferno
Ferno 24 MAXX Manuel utilisateur
Ferno
Ferno Integrated Patient Transport & Loading System... Manuel utilisateur
Ferno
Ferno Pegasus Manuel utilisateur
Ferno
Ferno CCT Six-P Manuel utilisateur
Ferno
Ferno Pedi-Mate 678 Manuel utilisateur
Ferno
Ferno 30-NM Manuel utilisateur
Ferno
Ferno 26-S Manuel utilisateur
Ferno
Ferno 26 Cot Manuel utilisateur
Ferno
Ferno Ultra Care 4000 Manuel utilisateur
