Fenix intl ReadyPay Manuel utilisateur

ReadyPay

Power System

User Manual

Table of Contents

i ii

1 Quick Start Guide

The solar panel can be placed on the ground or be

mounted on the roof, and should directly face the sun.

Keep the ReadyPay battery out of direct sun.

Place solar panel

in the sun

Press button to

start charging

Solar Charging

Charge light will turn

on while charging

Plug solar panel

into ReadyPay

red to red / black to black

Error Reset

Battery Charge Level

Empty

Using ReadyPay Power

Battery Level Lights

Charge Light

Lock Light

Wakeup Button

Locked Unlocked

ReadyPay Controls

ReadyPay Quickstart Guide

ReadyPay Modes

Locked Unlocked

Safely store the remote.

Accessories

Incorrect CodeCorrect Code

Once you have entered the num-

bers correctly, the ReadyPay will

make the ’happy code’ sound. The

lights will ash from the bottom to

the top showing that you have

entered a correct code.

With your remote directly pointed

towards the Power System, press *

followed by the 8 digit ReadyPay

code (from SMS), then #.

For example: *12345678#

Press the power button.

Page

1 Quick Start Guide i

2 Kit Contents 2

2.1 Location of Contents in Box 4

3 Usage Instructions

3.1 ReadyPay Power System 5

3.2 Charging Connections

3.2.1 Using Banana Pins to Charge 8

3.2.2 Using Bare Wires to Charge 10

3.2.3 Multiple Charging Connections 12

3.3 Charging with a Solar Panel 14

3.4 Charging from Grid 16

3.5 Lightbar, Wire & Car Lighter Plug 18

3.6 Big Pin USB Cable 20

3.7 USB Cable 22

3.8 3:1 Switch Hub 24

4 ReadyPay Payments & Codes 26

5 ReadyPay Power System Uses 29

6 Technical Specications 30

7 Common Issues 38

8 Call Customer Service When 42

9 Healthy Power System Tips 44

10 Frequently Asked Questions 46

11 Warranty, Service & Support 51

Table of Contents

iii

1 Quick Start Guide

ReadyPay Remote ReadySquid Cable

With Tips

USB Phone Charging

Cable with Tips

Grid Charger

ReadyPay Power System Solar Panel

2 Kit Contents

These are included in every ReadyPay Power System kit:

Accessory for making ReadyPay Payments:

Additional contents will depend upon kit purchased.

Car Lighter to

USB Adapter

Additional contents will depend upon kit purchased.

Big Pin Phone

Charging Cable

Lightbar String,

Wire & Switch

3:1 Switch Hub

4 5

Battery Level Lights

Charging Light

Lock Light

Power Button for wakeup, reset

and checking battery level

USB ports

(x2)

Car Lighter

Ports

2.1 Location of Contents in Box 3.1 ReadyPay Power System

The Power Button wakes up the ReadyPay Power

System when it is in sleep mode. It also resets the

Power System if there is an error. When pressed, the

Battery Level Lights on the Power System will turn on.

Notes

rIf there is an error, all 4 Battery Level Lights will ash.

rIf the device does not respond to a button press, a charge source

should be connected. If it then does not respond to a button press, the

Power System needs service.

The Battery Level Lights show how much energy is in

the battery. Press the Power Button to see how many

lights turn on.

1 light: almost empty

2 lights: more than 1/4 full

3 lights: more than 1/2 full

4 lights: more than 3/4 full

If the bottom light ashes three times then turns off,

the battery is empty and must be recharged.

Note You can start charging at any time. Always try to make the battery

full. Charging the battery with the Solar Panel from empty to full will

take a full day in bright sunlight.

Solar Panel included, separately, on top

ReadyPay Power System

Accessories & User Manual

2.1 Location of Contents in Box

The charging light turns on when the ReadyPay

Power System is receiving power from the Solar

Panel or Grid Charger.

The Lock Light will blink/ash with each press of

the ReadyPay remote when a number is entered.

If the Lock Light turns on when you press

the Power Button, it has a few different modes/

meanings:

Solid On:

If the Lock Light turns on and does not blink, the

Power System is locked. You will need to enter an

unlock code to continue using your Power System.

While locked, you can continue to charge your

Power System for three days. After three days you

will not be able to charge the battery. Also, when

locked, you will not be able to use the USB or Car

Lighter adapter ports to withdraw power. See

section 4 “ReadyPay Payments & Codes” for further

details on obtaining unlock codes.

Blink/Flash:

If the Lock Light is blinking/ashing 1 time per

second, the Power System is too warm for charging.

The Power System will not start charging until it has

cooled down to an acceptable temperature.

Fast Blink/Flash:

If the Lock Light is blinking/ashing very quickly,

the Power System needs to be serviced. Please

contact ReadyPay Customer Service for instructions

on how to return your Power System for service.

6 7

3.1 ReadyPay Power System

The USB ports are for charging phones, phone

batteries, and running 5 volt DC devices with a USB

connection.

The Car Lighter Adapter (CLA) Ports are for operating

the LED Lightbars, car chargers for phones, and other

devices that can be powered by 12V DC car batteries.

The black and red terminals are used for connecting

the Solar Panel or the Grid Charger. Always match red

to red, black to black. When using a non-Fenix charger,

black is negative, red is positive.

Notes

rDo not connect the red and black terminals with anything metal.

Doing so may damage your Power System.

rSerial Number is located on the bottom of the Power System.

rDon't tamper with your battery. This will void your warranty. Call

ReadyPay Customer Service if your Power System needs repair.

Bind terminal (black)

7Bind terminal (red)

Step 3 Push the red Banana Pin from the Grid Charger or

Solar Panel into the bottom of the red bind terminal.

Note Be sure to connect red to red.

Step 4 This is a good connection.

3.2.1 Using Banana Pins to Charge

Step 1 Twist each terminal closed.

Step 2 Push the black Banana Pin from the Grid Charger or

Solar Panel into the bottom of the black bind terminal.

Note Be sure to connect black to black.

1110

Step 4 This is a good connection.

Note You can also wrap the bare wire around the metal portion of the bind

terminal rather than through the hole.

3.2.2 Using Bare Wires to Charge

Step 2 Make sure that the wires from your charger have

at least 1 cm of bare wire exposed. Insert the exposed

portion of the wire into the hole in each bind terminal.

Step 3 Twist each terminal closed onto the wire.

Note Finger tightened is sufcient. Be sure to connect black to black and

red to red. Do not touch metal between the red and black terminals. Doing

so may damage your Power System.

Step 1 Unscrew each bind terminal.

Note You can use this process if the banana pins of your solar panel or Grid

Charger break or get damaged.

3.2.3 Multiple Charging Connections

Step 1 To connect additional Solar Panels using Banana Pins,

push additional Banana Pins through the holes in the rst

Banana Pins.

Note Be sure to connect black to black and red to red. Do not connect the red and

black terminals with anything metal. Doing so may damage your Power System.

Step 2 This is a good connection.

12 13

Step 1 To connect additional Solar Panels using bare wires

or a mix of wires and Banana Pins, rst insert the wires using

the wire wrap method. Then insert the Banana Pins.

Step 2 This is a good connection.

Step 1 Insert the Banana Pins from the Solar Panel cable into

the red and black terminals on the back of the ReadyPay

Power System.

Note Be sure to connect black to black and red to red. Do not touch metal

between the red and black terminals. Doing so may damage your Power System.

Step 2 Place the Solar Panel in direct sunlight, and then

press the Power Button on the ReadyPay Power System

to start charging.

DOs

rIt is okay for the Solar Panel to get wet (from

rain, etc).

rSolar Panels with other kinds of tips on their wires can be

used with your Power System by cutting

the wires and attaching with the ‘bare wire method’ as

shown on page 10.

rSolar Panels can be permanently installed on the roof

(highly recommended), or carried inside

each night.

DON'Ts

rDO NOT place the Power System in direct sunlight. Keep

the Power System cool. The Power System should not get

wet. Keep it dry.

rDO NOT connect the Power System to Solar and Grid

adapters at the same time.

3.3 Charging with a Solar Panel

1514

Table des matières

Manuels Onduleur populaires d'autres marques

Fourgroup

Fourgroup Easy Manuel utilisateur

Velleman

Velleman PI300M Manuel utilisateur

Sungrow

Sungrow SG350HX-US Manuel utilisateur

WilTec

WilTec 61897 Manuel utilisateur

SMA

SMA SUNNY BOY STORAGE 2.5 Manuel utilisateur

Simplicity

Simplicity LANDLORD 316 Manuel utilisateur

Santak

Santak SMAX 3000 Manuel utilisateur

ATON

ATON RA.Store-3 Manuel utilisateur

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuel utilisateur

Tektronix

Tektronix CFG250 Manuel utilisateur

Champion

Champion 200989 Manuel utilisateur

Vanner

Vanner 20-500 Series Manuel utilisateur

GE GEP Manuel utilisateur

Astrel Group

Astrel Group Power Reducer Guide rapide

MULTIQUIP

MULTIQUIP GDP-5H Mode d’emploi

GoWISE

GoWISE PS1007 Manuel utilisateur

Promate

Promate PM13500D ES Manuel utilisateur

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuel utilisateur

fenix intl ReadyPay Manuel utilisateur

Manuels Onduleur populaires d'autres marques