A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION, CORONA, CA USA
Fender
®
is a registered trademark of FMIC. © 2004 FMIC. All rights reserved v.040818
SS
SSpp
ppee
eecc
ccii
iiff
ffii
iicc
ccaa
aatt
ttii
iioo
oonn
nnss
ss
II
IImm
mmpp
ppoo
oorr
rrtt
ttaa
aann
nntt
tt
SS
SSaa
aaff
ffee
eett
ttyy
yy
II
IInn
nnss
sstt
ttrr
rruu
uucc
cctt
ttii
iioo
oonn
nnss
ss
TYPE: PR 644
PART NUMBER: 023-9995-000 (120V, 60Hz) USA 023-9995-030 (240V, 50Hz) AUS 023-9995-040 (230V, 50Hz) UK
023-9995-060 (230V, 50Hz) EUR 023-9995-070 (100V, 50Hz) JPN
SCALE: 12 note equal temperament
RANGE: A0 (27.5Hz)–B7 (3951.06Hz)
PRECISION: ±1 cent
CALIBRATION RANGE: 438Hz–455Hz, 1Hz steps (A4 440Hz default)
POWER CONSUMPTION: 27W
FUSE: 100V–120V models: T250mAL 220V–240V models: T150mAL
DIMENSIONS: Height: 44mm Width: 483mm Depth: 190mm
WEIGHT: 2.5kg
Product specifications are subject to change without notice.
This symbol warns the user of dangerous voltage levels localized
within the enclosure.
This symbol advises the user to read all accompanying literature for
safe operation of the unit.
∆Read, retain, and follow all instructions. Heed all warnings.
∆CAUTION: No user serviceable parts inside, refer servicing to qualified
personnel only.
∆WARNING: To prevent damage, fire or shock hazard, do not expose this unit
to rain or moisture.
∆Do not drip nor splash liquids, nor place liquid filled containers on the unit.
∆Hazardous voltages may be present within the cabinet even when the power
switch is off and the power cord is connected. Therefore, disconnect the
power cord from the rear panel power inlet before servicing. The power inlet
must remain readily operable.
∆This product should be located away from heat sources such as radiators,
heat registers, or other products that produce heat.
∆This product should be serviced by qualified service personnel when: the
power supply cord or the plug has been damaged; or objects have fallen, or
liquid has been spilled onto the product; or the product has been exposed to
rain; or the product does not appear to operate normally or exhibits a marked
change in performance; or the product has been dropped, or the enclosure
damaged.
∆This product should only be used with a cart or stand that is recommended
by the manufacturer.
∆Maintain at least 6 inches (15.25 cm)of unobstructed air space behind the
unit to allow for proper ventilation and cooling of the unit.
∆This product may be equipped with a polarized plug (one blade wider than
the other). This is a safety feature. If you are unable to insert the plug into
the outlet, contact an electrician to replace your obsolete outlet. Do not
defeat the safety purpose of this plug.
∆Only connect the power supply cord to an earth grounded AC receptacle in
accordance with the voltage and frequency ratings listed under INPUT
POWER on the rear panel of this product.
∆Protect the power supply cord from being pinched or abraded.
∆The power supply cord of this product should be unplugged from the outlet
when left unused for a long period of time, or during electrical storms.
∆Unplug the power supply cord before cleaning the unit exterior (use a damp
cloth only). Wait until the unit is completely dry before reconnecting it to
power.
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
