Fender LEVEL SET BUFFER Manuel utilisateur

LEVEL SET BUFFER

2LEVEL SET BUFFER

LEVEL HI-FREQ

MUTE

LOAD

1. Mute Footswitch

2. Tuner Output Jack

3. Jewel Indicator

4. Main Output Jack

5. Level

6. Hi-Freq

7. Load Switch

8. Input Jack

9. Low Battery Indicator

10. LED Kill Switch

11. DC Power Connector

LEDs

9V DC

INPUT

5 6

DESIGNED IN CALIFORNIA, U.S.A.

Thanks for purchasing the Level Set Buffer—a ﬂexible utility

pedal designed especially for electric guitar and bass. The

Level Set Buffer is designed to accomplish three main

functions. First, it provides a separate output for a stage

tuner in order to keep the signal path purer (the built-in mute

footswitch also allows silent tuning). Note that the tuner

output is always active, meaning that tuning can be done

mid-performance without having to mute the signal (if

preferred). Second, the Level and Hi-Freq controls allow

output-level compensation for different instruments,

enabling easier guitar swaps without having to adjust

multiple settings. Third, the pedal serves as a buffer that

helps maintain signal quality through multiple pedals and

cables. The Level Set Buffer is designed to be placed ﬁrst in

the signal chain, with other pedals following.

LEVEL SET BUFFER

Level

This control offers up to 12dB of volume boost or cut, with the center

position being unity gain (no level change). With the player’s main

instrument, begin by setting this control to the center position and

then dialing in the rest of the rig. Then adjust the Level control up or

down as needed depending on the output level of subsequent

guitars. Humbucking or active pickups may require a cut in gain

(counter-clockwise) while vintage single-coil type pickups might

require more gain (clockwise) to sound right.

Hi-Freq

The Hi-Freq gain control behaves similarly to the Level control,

except that it only affects very high frequencies. This control is

designed to add a little sparkle to darker pickups, or to warm up

overly bright pickups. Like the Level control, this control offers up to

12dB of boost or cut.

Load Switch

The Load Switch applies capacitance to the input and loads guitar

pickups in the same way that a traditional tube amp might. Note that

the effect can be subtle, and the results will differ depending on (as

with a tube amp) the type of pickups in use, instrument volume pot

value and setting, and cables.

Jewel Indicator

The jewel is illuminated when the pedal is not muted, letting players

know they’re ready to rock.

Mute Footswitch

This rugged footswitch mutes the main output jack, to allow for silent

tuning.

Input Jack

This is a high-impedance input suitable for electric guitar, bass,

acoustic guitars with pickup systems, keyboards and other

instruments.

Main Output Jack

This is a low-impedance output jack that connects to the amp or to

the next effect pedal in the signal chain.

Tuner Output Jack

This jack connects to a tuner’s input jack.

DC Power Connector

This is a standard, center-negative 9VDC jack for use with

appropriate power supplies.

LED Kill Switch

This switch extinguishes the LEDs that illuminate the knobs—useful in

maximizing battery life when running the pedal from batteries.

Low Battery Indicator

This red LED on the front of the battery door illuminates when battery

voltage drops below a set threshold, indicating that the battery

should be replaced soon.

Product speciﬁcations subject to change without notice

Speciﬁcations

IMPEDANCES:

POWER SUPPLY:

POWER REQUIREMENTS:

DIMENSIONS:

WEIGHT:

INPUT: 1MΩ OUTPUT LOAD: >10kΩ

One 9V battery or 9VDC regulated adapter,

5.5 x 2.1 mm barrel connector, center negative

14mA @ 9VDC

64mA, Total Current Consumption

2.75” x 4.9” x 2.5” (95.25mm x 124.5mm x 63.5mm)

.9lbs (.40kg)

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORPORATION

CORONA, CALIFORNIA, USA

Fender® is a registered trademark of FMIC.

P/N 7713288000 - REV A

Important Safety Instructions

•WARNING: To prevent damage, ﬁre or shock hazard, do not expose the unit or its AC

power to rain or moisture.

•Do not alter the AC plug of the connected power adapter

•Do not drip or splash liquids on the unit.

•No user serviceable parts inside, refer servicing to qualiﬁed personnel only.

• WARNING: The unit must only be connected to a safety agency certiﬁed, regulated,

power source (adapter), approved for useand compliant with applicable local and

national regulatory safety requirements.

• Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth

for cleaning and then wait until the unit is completely dry before reconnecting it to power.

• Ampliﬁers and loudspeaker systems, and ear/headphones (if equipped) are capable

of producing very high sound pressure levels which may cause temporary or permanent

hearing damage. Use care when setting and adjusting volume levels during use.

Languages

Manual available in Espanol, francais, Italiano, Deutch, Portugues, (Chinese)

www.fender.com/support

Expanded Owner’s Manual

Expanded Owner’s Manual available at:

www.fender.com/support

NOTES:

Table des matières

Autres manuels Fender Pédale musicale

Fender

Fender HAMMERTONE OVERDRIVE Manuel utilisateur

Fender

Fender Pinwheel Manuel utilisateur

Fender

Fender Downtown Express Manuel utilisateur

Fender

Fender HAMMERTONE DISTORTION Manuel utilisateur

Fender

Fender Pinwheel Manuel utilisateur

Fender

Fender MUSTANG FLOOR Manuel utilisateur

Fender

Fender THE PELT Manuel utilisateur

Fender

Fender Smolder Acoustic Overdrive Manuel utilisateur

Fender

Fender COMPUGILIST Manuel utilisateur

Fender

Fender MUSTANG FLOOR Manuel utilisateur

Fender

Fender Pugilist Distortion Manuel utilisateur

Fender

Fender Reflecting Pool Manuel utilisateur

Fender

Fender Blender Custom Manuel utilisateur

Fender

Fender Bubbler Chorus Manuel utilisateur

Fender

Fender ACOUSTIC PREVERB Manuel utilisateur

Fender

Fender EXP-1 Manuel utilisateur

Fender

Fender TREAD-LIGHT VOL/EXP PEDAL Manuel utilisateur

Fender

Fender THE TRAPPER Manuel utilisateur

Fender

Fender TRE-VERB Manuel utilisateur

Fender

Fender MTG Manuel utilisateur

Fender

Fender TRAPPER BASS DISTORTION Manuel utilisateur

Fender

Fender HAMMERTONE METAL Manuel utilisateur

Fender

Fender HAMMERTONE CHORUS Manuel utilisateur

Fender

Fender DUEL PUGILIST DISTORTION Manuel utilisateur

Manuels Pédale musicale populaires d'autres marques

Behringer

Behringer ULTRA WAH UW300 Manuel utilisateur

Whirlwind

Whirlwind oc-bass Manuel utilisateur

Strymon

Strymon Lex-rotary Manuel utilisateur

Behringer

Behringer PB600 Manuel utilisateur

Lexicon

Lexicon MX200 Manuel utilisateur

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuel utilisateur

Matthews Effects

Matthews Effects Whaler V2 Manuel utilisateur

Grid 1

Grid 1 Pedal Jeanie Manuel utilisateur

Amptweaker

Amptweaker tightboost Manuel utilisateur

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuel utilisateur

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuel utilisateur

BYOC

BYOC Analog Chorus Manuel

Dimavery

Dimavery EPVP-50 Manuel utilisateur

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuel utilisateur

Pro-MIDI

Pro-MIDI G25 Manuel utilisateur

DW 7000 Manuel utilisateur

FAMC

FAMC Liquid-Foot Jr. Series Manuel utilisateur

Dimavery

Dimavery EPOD-50 Overdrive Manuel utilisateur