FEIMEX FX500 Manuel utilisateur

User Manual: FX500 | A | IP | IPA

1. FIRST STEPS

Included in delivery..........................................................................................4

Inspection/guarantee....................................................................................4

Power supply......................................................................................................4

Safety warnings ...............................................................................................5

2. INTRODUCTION

Description..........................................................................................................6

Features...............................................................................................................6

Product overview.............................................................................................7

Measurements.................................................................................................. 7

3. INSTALLATION

Installation requirements............................................................................8

Connecting the DMX signal cable............................................................9

3-pin zu 5-pin transition table.................................................................9

4. INSTRUCTIONS

Control panel functions............................................................................. 10

Menu folder ......................................................................................................11

Settings..............................................................................................................12

Forming groups..............................................................................................13

Group-working (DMX512-mode)........................................................... 15

DMX 512-control mode ............................................................................. 16

Auto-program.................................................................................................17

DMX 512-channel values............................................................................17

5. APPENDIX

Service/settings ...........................................................................................24

CONTENTS

INCLUDED IN DELIVERY:

1x FEIMEX FX500 | A | IP | IPA

1x open Titanex power cable with Neutrik PowerCon plug

1x User manual

IP-Version

1x high-quality 110 ohm DMX cable with Neutrik NC3FX-HD & NC3MX-HD, each 1.20 m

INSPECTION/WARRANTY:

Please check that the delivery is complete and the state of the goods. If the packaging and/

or parts of the delivery are damaged, please immediately inform your supplier. We recommend

keeping the original packaging in case of returns.

POWER SUPPLY:

Mains voltage: AC 100-240V / 50-60 Hz

The appliance is equipped with an automatic switch-mode power supply. Please check before initial

operation, that the local mains voltage is within this range.

Up to 12 appliances (230V) can be connected to this appliance in a row, as an “end-to-end

connection“, utilising the “power-in“ and “power-out“ connections.

Help guard the environment! Ensure that your appliance is recycled at the

end of its lifespan. Your supplier can help with further information about

suitable centers for waste management in your vicinity.

1. FIRST STEPS

SAFETY WARNINGS

CAUTION! Please read the following details conscientiously before inital operation

of the appliance. They contain important information about handling and servicing

of the appliance.

The following symbols are used to indicate important information for the product and in this user

manual.

• This appliance requires stage I protection measures and therefore must be earthed.

• The power supply must be set up and maintained by a qualiﬁed technician.

• Make sure that the working current isn‘t higher or lower than the prescribed values.

• Make sure that the cables aren’t damaged and can not be damaged by sharp objects.

• The appliance must be switched owhen not in use or before approval.

• The cable must be plugged in to the socket and unplugged by hand.

• Be careful when installing the appliance. To avoid electric shock, never ever touch exposed

cables!

• Please only use high quality cable for operating the ﬁxture.

• No warranty of any kind is given in the case of modiﬁcations to the appliance.

• The maximum surrounding temperature for operation of the appliance must not fall below

-20° C and exceed 40° C.

• Never connect the appliance to a dimmer.

• Do not switch more than eight appliances in row at 120V and not more than 12 appliances at

230V.

1. FIRST STEPS

CAUTION!

Refer to user manual.

CAUTION!

LED light emission.

Risk of eye injury.

CAUTION!

Fire hazard.

CAUTION!

Hazardous Voltage.

Risk of lethal or

severe electric shock.

CAUTION!

Safety hazard. Risk

of severe injury or

death.

DESCRIPTION

• Voltage range (alternating current/AC): 100V to 230V at 50-60Hz

• Rated power: 110W

• LED-quantity: 15x4-in-1(RGBW)

• LED: 380mA

• Beam angle: Standard 30°

• Protection class: IP20-indoor-version / IP65-outdoor-version

• Product size: 990x120x145 mm

• Packaging size: 1070x160x170 mm

• Weight: 5.70 kg

FEATURES

• RGBW or RGBA-colour-mixing

• 5 individual dimmer-curves

• User-deﬁned programs

• LED-display with password protection

• Transfer of user-programs between ﬁxtures

• Operating-mode: DMX 512-connection with ID-address/master & slave…

• DMX-channels: 11 Ch. / 4 Ch. / 6 Ch. / 15 Ch. / 17 Ch. / 21 Ch. / 60 Ch.

2. INTRODUCTION

PRODUCT OVERVIEW

POWER IN

DMX OUT

POWER OUT

LED SIGNAL

POWER OUT

DMX IN

DMX OUT

INDOOR

OUTDOOR

990

145 100

120

1 2 3 45678 9 10 11 12 13 14 15 16

Hanging Clamp

Note: sold

separately

Safety Cable

Note: the cable must be

secured through the heat

sink ventilation

passageway.

DMX IN DMXOUT DMX IN DMXOUT DMX IN DMXOUT

Power-in = voltage input | DMX-in = DMX-input | LED signal = pilot light

Power-out = voltage output | DMX-out = DMX-output

MEASUREMENTS

POWER IN

DMX OUT

POWER OUT

LED SIGNAL

POWER OUT

DMX IN

DMX OUT

INDOOR

OUTDOOR

990

145 100

120

1 2 3 45678 9 10 11 12 13 14 15 16

Hanging Clamp

Note: sold

separately

Safety Cable

Note: the cable must be

secured through the heat

sink ventilation

passageway.

DMX IN DMXOUT DMX IN DMXOUT DMX IN DMXOUT

2. INTRODUCTION

INSTALLATIONS-REQUIREMENTS

• This product can be ﬂown or stood.

• For mounting in truss (suspending or standing), special clamps (trigger-clamps, half-couplers,

etc.) are necessary. These clamps are not included in delivery and must be acquired

independently.

• No ﬂammable objects may be placed within a half meter radius of the appliance.

•To avoid damage to the appliance, mounting and installation of the appliance should be handled

by a qualiﬁed professional.

• Regard safety requirements according to BGV C1.

• Make sure you use a steady platform for installation- and maintenance work. In the case of

suspending (ﬂown) installations or maintenance of such, no further persons may be under the

appliance.

3. INSTALLATION

CONNECTING THE DMX-SIGNAL-CABLE

1. Please only use high quality cable. We recommend FEIMEX Platin DMX cable. Connect the female

3-pin end of the DMX-cable to the male 3-pin input of the ﬁrst appliance.

2. Connect the female 3-pin cable end of the ﬁrst ﬁxture to the male 3-pin input-connector of

the following appliance. Repeat this procedure until you have connected the desired number of

your appliances.

3. No matter how many ﬁxtures you connect in a row, we recommend using FEIMEX Platin DMX

cables. The DMX-signal does not detoriate. An supplemental signal ampliﬁer is not necessary.

DMX IN DMXOUT DMX IN DMXOUT DMX IN DMXOUT

3-PIN ZU 5-PIN-TRANSITION-TABLE

Important! If you use a controller with a 5-pin

DMX-output-connection, you must use a

5- to 3-pol DMX-adapter for DMX IN.enden.

Line 3-Pin Female (Output) 5-Pin Male (Input)

ground/shield Pin 1 Pin 1

data (-) signal Pin 2 Pin 2

data (+) signal Pin 3 Pin 3

not used not used

(In some older desks, pin 2 is swapped with pin 3.)

DMX IN DMX OUT DMX IN DMX OUT DMX IN DMX OUT

DMX IN DMX OUT

2= DMX-

3= DMX+

1= GND

3. INSTALLATION

CONTROL-PANEL-FUNCTIONS

KNOB FUNCTION

MENU To exit the current menu or the current function.

ENTER To select the currently shown menu or to deﬁne the currently selected

value in the selected function.

UP Navigates up in the menu bar and increases the numeric value within a

function.

DOWN Navigates down in the menu bar and decreases the numeric value within a

function.

4. INSTRUCTIONS

Autres manuels pour FX500

Ce manuel convient aux modèles suivants

Table des matières

Manuels Éclairage domestique populaires d'autres marques

JONATHAN Y

JONATHAN Y JYL5019A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL6007A Manuel utilisateur

Philips

Philips Ledino 31606/11/16 Manuel utilisateur

Salus

Salus UG600 Manuel utilisateur

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Manuel utilisateur

Hunter

Hunter Bullet Spotlight Kit Manuel d'instructions

Philips

Philips Ledino 16811/87/16 Manuel utilisateur

Philips

Philips 405441213 Manuel utilisateur

Philips

Philips Halogen Light Manuel utilisateur

Pentair

Pentair GLOBRITE Manuel utilisateur

Philips

Philips 55592-30-16 Manuel utilisateur

Livoo

Livoo Night light Manuel utilisateur

Schwaiger

Schwaiger NFL45 Manuel utilisateur

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Manuel utilisateur

MOOD

MOOD CORSIN JY-16 Manuel utilisateur

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL8019 Manuel utilisateur

XTRASUN

XTRASUN XTDEOKT1 Manuel utilisateur