FEIG MWD BP Manuel utilisateur

Instruction Manual

07/21/2006

Manual MWD BP.doc

Radar Motion Detector – MWD BP

Instruction Manual Radar Motion Detector MWD BP 2/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

General

Lange Straße 4

35781 Weilburg

Germany

The indications made in these operating instructions may be altered without previous notice.

With the edition of these instructions, all previous editions become void.

Composition of the information given in this manual has been done to the best of our knowledge. FEIG ELEC-

TRONIC does not guarantee the correctness of the details given in these instructions and may not be held liable

for damages ensuing from incorrect installation.

Since, despite of all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.

The installation instructions given in this manual are based on advantageous boundary conditions. FEIG ELEC-

TRONIC does not give any guarantee promise for perfect function of the traffic detector in a cross surrounding.

Copy or reproduction of these instructions, even if only partial, as well as translation into other languages is for-

bidden unless a written consent has been granted by FEIG ELECTRONIC. This also applies to the complete or

partial storage of these operating instructions on modern input- and output media for further processing in data

processing systems.

Please read the operating- and safety instructions thoroughly before putting the motion detector into opera-

tion !

Instruction Manual Radar Motion Detector MWD BP 3/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

Contents

1 Functional description____________________________________4

2 Installation _____________________________________________5

2.1 Place of installation _________________________________________________________ 5

2.2 Hints for planning and installation:____________________________________________ 5

3 Parameter Entry _________________________________________6

3.1 Open Parameter Entry ______________________________________________________ 6

3.2 Change Parameter__________________________________________________________ 6

3.3 Close Parameter Entry ______________________________________________________ 7

3.4 Show Service Parameter_____________________________________________________ 7

4 Standard Parameter List __________________________________8

5 Service Parameter List____________________________________9

6 Profiles ________________________________________________9

7 Notes _________________________________________________10

8 Connections ___________________________________________10

9 Technical data _________________________________________10

10 Type Approval _________________________________________11

10.1 Europe (CE)______________________________________________________________ 11

10.2 USA (FCC) / Canada (IC)___________________________________________________ 12

11 Safety instructions______________________________________13

Instruction Manual Radar Motion Detector MWD BP 4/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

1 Functional description

The MWD BP is a radar motion detector with direction identification, which has been especially designed for

applications in the area of industrial gate- and barrier systems. In some cases, the operational parameters may also

be adjusted with an infrared remote control.

Motion detection is done according to the Doppler’s principle. The sensor sends out 24 GHz microwaves. These

microwaves are reflected by objects in motion and thus their frequency changes. The sensor receives these altered

frequencies and analyses them. Thus, each motion within the detection range is recorded, analyzed by a logic and

transmitted to the gate- resp. barrier control by connecting potential-free change-over contacts.

Range of application:

Entry-/access recognition for the drive of industrial gate- and barrier systems

Special features:

•Insensitive to fluctuations of temperature and humidity

•Distinction vehicles/persons

•Suppression of cross traffic

•Object tracking for slow objects

•Reversible and cutoff direction logic

•Adjustable sensitivity

•Application specific parameter profiles

•Two channel with individual parameter setting

•Two potential-free relay contacts

•Large supply voltage range - AC or DC

•Adjustment of operational parameters by key buttons or infrared remote control and 7-segment display

•Compact plastic housing

•IP 65 housing

•Easy and fast installation with mounting bracket

Instruction Manual Radar Motion Detector MWD BP 5/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

2 Installation

2.1 Place of installation

The device is centrally mounted above the area to be monitored. Both wall- and ceiling mounting are possible. The

maximum mounting height is 7m.

2.2 Hints for planning and installation:

•The device has to be mounted vibrationless.

•In order to avoid incorrect release, there must not be any objects in motion within the radiation field.

•There must not be any fluorescent tubes within the radiation field of the detector.

•It should be avoided that the radiation fields of two motion detectors overlap, since this may lead to incorrect

releases.

•Do not install behind objects, building coverings or elements.

•If the motion detector is exposed to rain or snow, it should be adjusted to directional recognition.

•If conductive floors are used and the radiation direction is almost vertical, incorrect releases may be caused

by reflections.

Instruction Manual Radar Motion Detector MWD BP 6/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

3 Parameter Entry

3.1 Open Parameter Entry

a) Remote Control MWD RC

Symbol Key Key-

press Description Action Display

Example

1. ii-Button short Channel 1: displayed address

Channel 2: displayed address + 1 Actual device address is displayed

with blinking digit and decimal point Ñ1.Ò

2a. 1..4 value 1..4 short Direct confirmation

of device address Display first parameter name L.

Volume + 2.

2b. Volume - short Select address value Increment or decrement value.

Changed values doesn’t blink ! F

3b. On/Off short Indirect confirmation

of device address Display first parameter name L.

b) Buttons on Motion Detector MWD BP

The left button is functionally assigned to the On/Off-button on remote control MWD RC.

Right button is equivalent to the Volume +- button .

Key Key-

press Description Action Display

Example

1. Right or Left short Channel 1: displayed address

Channel 2: displayed address + 1 Actual device address is displayed

with blinking digit and decimal point Ñ1.Ò

2. Right short Select address value Increment or decrement value.

Changed values doesn’t blink ! 2.

3. Left short Confirmation

of device address Display first parameter name L.

3.2 Change Parameter

Before changing parameter values you have to open the parameter entry as described above.

a) Remote Control MWD RC

Symbol Key Key-

press Description Action Display

Example

Volume + d.

1. Volume -

short

(long)

Change parameter name

(long: quick selection)

Display parameter name with char-

acter and decimal point. P.

2. On/Off short Return to display

parameter value Actual parameter value is displayed

without decimal point. 1

Volume + 2.Ò

3. Volume -

short

(long)

Change parameter value

(long: quick selection)

Display changed parameter value

with blinking decimal point. 0.Ò

4a. On/Off short Undo changes Display actual parameter value again

(without decimal point) 1

4b. On/Off long Save new parameter value Decimal point expires after success-

ful saving. 2

5. On/Off short Return to display

parameter name Display parameter name with char-

acter and decimal point. d.

Instruction Manual Radar Motion Detector MWD BP 7/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

b) Buttons on Motion Detector MWD BP

Key Key-

press Description Action Display

Example

1. Right short

(long) Change parameter name

(long: quick selection) Display parameter name with char-

acter and decimal point. d.

2. Left short Return to display

actual parameter value Actual parameter value is displayed

without decimal point. 1

3. Right short

(long) Change parameter value

(long: quick selection) Display changed parameter value

with blinking decimal point. 2.Ò

4a. Left short Undo changes Display actual parameter value again

(without decimal point). 1

4b. Left long Save new parameter value Decimal point expires after success-

ful saving. 2

5. Left short Return to display

parameter name Display parameter name with char-

acter and decimal point. d.

3.3 Close Parameter Entry

a) Remote Control MWD RC

Symbol Key Key-

press Description Action Display

Example

1. On/Off long Close parameter entry

from standard parameter menu

service parameter menu display off

b) Button on Motion Detector MWD BP

Key Key-

press Description Action Display

Example

1. Left long Close parameter entry

from standard parameter menu

service parameter menu display off

c) automatic

60 s after last keypress on the remote control or directly on the motion detector parameter entry is closed automati-

cally.

3.4 Show Service Parameter

To display the Service Parameter you have first to open the parameter entry as described in chapter 3.1.

Service Parameter names are displayed with blinking character and static decimal point.

Menu navigation is conform to the navigation of standard parameter.

a) Remote Control MWD RC

Symbol Key Key-

press Description Action Display

Example

1. F+ or F- - long Activate service parameter from

standard parameter menu Display first service parameter name ÑA.

b) Button on Motion Detector MWD BP

The left button is functionally assigned to the On/Off-button on remote control MWD RC.

The right button is equivalent to the Volume +- button.

Button Key-

press Description Action Display

Example

1. Left and Right long Activate service parameter from

standard parameter menu Display first service parameter name ÑA.

Instruction Manual Radar Motion Detector MWD BP 8/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

4 Standard Parameter List

7-Segment Display

Parameter Name Parameter

Name Value Range Parameter Definition

Sensitivity Level L. 1..9,

A..F

1 = low

7 = middle

9 *

F = high

direction d. 0..20 = off

1 = approaching *

2 = departure

human detection h. 0..3

0 = off *

1 = low

3 = high

vehicle detection u. 0..3

0 = off *

1 = low

3 = high

Cross traffic suppression C. 0..3

0 = off *

1 = low

3 = high

Object tracking O. 0..3

0 = off *

1 = low

3 = high

relay function r. 0..4

0 = off

1 = channel 1 * (for channel 1)

2 = channel 2 * (for channel 2)

3 = channel 1 OR channel 2

4 = channel 1 AND channel 2

output on delay time t. 0..F0 = 0s *

1..F = 0.2s .. 3.0s (value x 0.2s)

output off delay Time T. 0..F

0 = 0s

1 = 0.2s (value x 0.2s)

2 = 0.4s *

3..F = 0.6s .. 3.0s

relay operating mode o. 0..10 = normally de-energized *

1 = normally energized

Profiles P. 0..90 = parameter changed after profile setting (only displayed !)

1 = Profile No 1: initiate Factory Setting *

2..9 = Profile No. 2..9

* factory setting

Note:

Resetting to factory values can be effected by parameter name “profile” with parameter value “1”. Alternatively

press both keys while switching power supply on.

Instruction Manual Radar Motion Detector MWD BP 9/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

5 Service Parameter List

7-Segment Display

Parameter Parameter

Name Value Range Parameter Definition

device Address A. 1..9,

b..d

1 = 1 *

: (only odd address)

d = 13

miscellaneous Settings S. 0..3

0 = all off **

1 = key operation on, display relay output off

2 = only display relay status off **

3 = key operation and display relay output on *

firmware information i. - show Firmware-Version on display:

- manually, with „ “-Button for each character

- automatically, with „i“-Button one character per second

* factory setting

** Key operation is always available in the first 15 minutes after power on regardless of the parameter setting. If the display of the relay

output is deactivated, only the decimal point is commonly used to show the relay status of both channels.

6 Profiles

Profile No. 1234 56789

Channel 1 2 1 2 1 2 1 21212121212

Sensitivity

Level 999999999

Direction appr. appr. appr. appr. appr. appr. appr. appr. appr.

Human

Detection - - - =2- - - =2- - -

Vehicle

Detection - - --=2- --=2- -

Cross

Traffic

Suppr. - - - - -=2- - -=2-

Detection

Object

Tracking - - - - --=2- --=2

On delay ---------

Off delay 400 ms 400 ms 400 ms 400 ms 400 ms 400 ms 400 ms 400 ms 400 ms

Assign-

ments

(Logic) Ch1 Ch2 Ch1 - Ch1 Ch2 Ch1 Ch2 Ch1 Ch2 Ch1 Ch2 Ch1 Ch2 Ch1 Ch2 Ch1 Ch2

Relay

Working

Principle AP AP AP AP AP AP RP RP RP

Remarks

Factory

Setting:

additional

parameter

(e.g. device

address =1)

will be

initialized

too.

Channel 2:

Relay output

off

same as

Factory

Setting

without

initializing

additional

parameter

Channel 1 :

only persons

Channel 2 :

only vehicles

Channel 1 :

all objects

Channel 2 :

cross traffic

suppression

Channel 1 :

all objects

Channel 2 :

slow motion

object

tracking

Profile No. 4,

but with RP

Profile No. 5,

but with RP

Profile No. 6,

but with RP

Ch1 = Channel 1 Ch2 = Channel 2

AP = normally de-energized RP = normally energized appr. = approaching direction

Instruction Manual Radar Motion Detector MWD BP 10/13

Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH

7 Notes

-The MWD BP is a 2 channel device. While opening parameter entry first the odd address used to open chan-

nel 1 will displayed. The following even device address activates channel 2.

-In factory settings relay 1 with change over contacts is assigned to channel 1 (display „|.“) and relay 2 with

normally open contact is assigned to channel 2 (display „| |.“). It is possible to change relay assignments via

parameter entry.

-Only the odd device address of channel 1 can be changed. The address of channel 2 results from the following

even address.

-Common parameter (e.g. firmware info, profiles...) can be displayed/changed with even or odd device ad-

dress.

8 Connections

1Com

1NO

1GND 24V NO

2Com

1234567

Backside view, Contact status for power off

9 Technical data

Dimensions 135x65x130mm (BxHxT)

Protective system IP 65

Power supply 12-27 V AC / 12-30 V DC

Power consumption typ. 1,0 W, max. 2,4 W

Admissible working temperature -20 °C .. +60 °C

Storing temperature -30 °C .. +75 °C

Air moisture < 95 % not condensing

Transmit frequency typ. 24,125 GHz

Output power (EIRP) typ. 40 mW, max. 100 mW

Output relay

max. switching load 1 A / 30 V AC/DC (resistive load)

min. switching load 1 mA / 5 V DC

Use external protective wiring for inductive load !

Maximum mounting height 7 m

Table des matières

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur