Ligh
Ma
t
in
S
S
w
w
i
it
t
c
c
h
h Ma
Li
i
g
n
ht
S
Sw
w
iy
i
c
t
h
ch
1)
Theory of energy storage system: System converts energy from battery to electric
energy for DC or AC use.
2)
Theory of DC output: System converts the energy in the battery into electric
energy for DC use.
3)
Theory of AC output:System converts the energy in the battery into
electric energy for AC use.
4)
Theory of DC input:The energy storage system charges the battery with the
energy from the solar charging panel or other output of DC charger.
5)
The system uses lithium battery,for safety,in leaving the factory,the battery
has 30%to 50%of capacity.Before first use, it is recommended filling up with power
after full discharge.
6)
When the battery capacity is shown to be 20%, the system is likely to be cut off.
It is recommended to stop using and recharge before the battery reused.
7)
When the battery is 20%, normally it takes 4-6 hours to fill the battery under normal
charging conditions.
8)
Non-manufacturer-equipped charging wires and chargers may cause battery failure
or damage.
②
When need to start function ④light,should press function ①main switch in turn,
then press function ②light switch.When function ①main switch needs to be kept
on, the function ④light can be controlled separately by function ②light switch.
