Feel-Maestro MR565 Manuel utilisateur
Сerticated in Ukraine
Виріб сертифіковано в Україні
Model/Модель: MR565
Owners manual. Food processor
Bedienungsanleitung. Küchenmaschine
Instrukcji obsługi. Robot kuchenny
Manualul proprietarului. Blender stationar
Руководство по эксплуатации. Кухонный процессор
Керівництво з експлуатації. Кухонний процесор
EN
DE
PL
UA
RU
RO
091
2
Pictures/ Bilder/Rysunki/ Figuri/ Рисунки/ Малюнки 1
Description of the appliance___________________________________________4
Gerät_______________________________________________________________13
Konstrukcja urządzenia_______________________________________________25
Structura produsului____________________________________________________36
Устройство прибора____________________________________________________47
Склад приладу________________________________________________________58
EN
DE
PL
UA
RU
RO
A
B
C
E
D
F
Puls/O/Low/High
3
Dear customer, we thank you for purchase of goods
Functionality, design and conformity to the quality standards
guarantee to you reliability and convenience in use of this device.
Please read and comply with these original instructions prior to the
initial operation of your appliance and store them for later use
of subsequent owners.
Blender is designed only for handling (mixing) liquid and not solid
products in domestic conditions.
Under condition of observance of user regulations and a special-
purpose designation, a parts of appliance do not contain unhealthy
substances.
Technical specications
Model MR565
Electrical supply:
Alternating current- AC;
Rated voltage 220-240V;
Rated frequency 50Hz;
Power consumption 350W
Protective class II
Protection class IPX0
EN
4
Number of operative speeds: 2 speeds, pulse operating mode
Regime of operation:
Blending (1,2 speeds) – continuous switching up to 2 minutes,
pause is no less than 5 minutes until the complete cooling.
Blending pulse mode – short switches up to 2 seconds alternating
with pauses, the total cycle is up to 2 min. After an operating cycle,
pause for at least 5 minutes until complete cooling.
Description of the appliance
Picture1 (page 2)
А - Plug (for lling)
B – Lid of blender jar
C – Bowl for ingredients mixing.
D – Switch / speed switch
«0» - deactivated OFF
«1» - low speed
«2» - high speed
«P» - pulse mode E – Case
F – Package base
Safety instructions
When using your appliance, basic safety precautions should
always be followed, including the following:
5
SPECIAL INSTRUCTIONS
ATTENTION!
NEVER immerse the electric drive case, cable or plug in any liquid.
NEVER touch the appliance with wet or damp hands.
ALWAYS disconnect appliance before cleaning, assembling,
disassembling, loading and unloading products
Failure to observe these rules may result in electric shock!
- DO NOT let children or untrained persons use the appliance
without supervision.
- DO NOT leave the appliance unnecessarily plugged in. Disconnect
the plug from the mains when the appliance is not being used.
- DO NOT use the power cord or the appliance in order to pull the
plug out of the socket.
- DO NOT leave the appliance exposed to the weather (rain, sun,
etc. ).
- DO NOT leave the appliance without supervision when it is
connected to the power supply.
- Close supervision is necessary when the appliance is used near
children.
- Always unplug from the plug socket when not in use and before
cleaning.
- Do not operate the appliance if damaged, after an appliance
malfunctions or it has been damaged in any manner, return to at
authorized service engineer for repair.
- In the interest of safety, regular periodic close checks should be
carried out on the supply cord to ensure no damage is evident.
Should there be any signs that the cord is damaged in the slightest
degree, the entire appliance should be returned be authorized
service engineer.
EN
6
- Do not let the cord hang over the edge of a table or counter or
touch hot surfaces. Allow unit to cool before storage.
- Do not use harsh abrasives, caustic cleaners or oven cleaners
when cleaning this appliance.
- This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
-If your device was brought from cold to warm room, do not switch
it on within 2 hours to prevent damage due to condensation on
internal parts.
-Do not use damaged nozzles.
ATTENTION!
The device has very sharp cutting blades which demand
extremely careful handling.
- Do not touch moving parts during the blender operation
- Always disconnect appliance before cleaning, assembling,
disassembling, loading and unloading products
Perform assembly and disassembly only after full stop of moving
parts.
In case of failure to observe the rules a danger of serious
damages may arise!
- THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. DO NOT
USE THE APPLIANCE FOR ANYTHING OTHER THAN INTENDED
USE.
Purchase industrial devices for commercial use.
Actions in extreme situations:
7
- If a device tumbled into water, immediately, unplug the
device, not touching to the device or water.
- In case of appearance from appliance of smoke, sparkling, strong
smell of a burn isolation, immediately stop use the device, unplug
the device, appeal to the nearest service center.
Using the appliance
With the aid of this blender you can cook wonderful soup-puree,
mayonnaise, sauces, cocktails, savories, baby foods and many
other dishes.
Keep the blender jar with the products free from foreign objects
and materials. Peel fruits and vegetables, remove pits and cut into
pieces 2х2cm in size before the beginning of handling.
Do not handle very hard products such as: serials, rice, coee, ice,
frozen products.
Grind coee only in a coee-grinder.
Inspect all parts for damages, check that the blades are properly
attached.
Make sure that the switch (D/Fig. 1) is in the «0» position
(deactivated /OFF).
Install the electric drive body (E/Fig.1) of the blender on an even,
dry and stable surface.
Install the jar (C/Fig. 1) on the body, make sure that the bottom of
the jar is fully seated in the body seat. The jar can be installed in
several positions (around the axis).
Put the products into the jar. Be sure to close the lid of the jar (B/
Fig. 1).
Connect the device to the electricity mains of 220-240 V, 50 Hz.
EN
8
Food processing in the blender jar
To avoid spillage, the blender jar must be lled with products not
exceeding the maximum mark. Many products increase in volume
during processing. Use the blender to blend the ingredients with
water or another liquid (do not blend only dry foods).
With the switch (D/Fig. 1), select the required speed 1,2 or pulse
mode.
Pulse mode works only when the switch is pushed and held down.
Speeds 1 and 2 of the continuous cycle work until the switching arm
is returned to the «0» position.
To add products during blender operation, remove the plug (A/Fig.
1) from the lid and add the ingredients through the hole in the lid
Preparation for work
- Before the rst use remove packing material, make sure that all
parts of the device are not damaged.
Before the rst use wash all removable parts with warm water and
detergent and thoroughly dry.
- It is prohibited to submerge the case of electric drive, its mains
connector and the plug in water or any other liquid.
Attention! At the time of the rst switching on the device, a specic
smell or smoke may appear for a short time. These are normal
phenomena due to the presence of preservation materials on the
electric drive motor. They shall disappear after several minutes of
the device operation.
9
Cleaning and maintenance
ATTENTION!
- Never clean the device while it is connected to the mains.
- Before cleaning disconnect the device and wait for full stop of
moving parts.
- Do not use abrasive and aggressive detergents, solvents, alkaline,
metal objects and wash-ups.
- Never submerge electric drive, its mains cable and plug in water
or other liquid, do not wash the drive in water or in a dish washing
machine.
-Wash cutting blades with special care!
Immediately after the use wash (without soaking for a long time)
the nozzles with warm soapy water using a soft nylon sponge, then
wipe with a dry clean towel. Water temperature must not exceed
60ºС. The blender can be washed in a dish washing machine;
however, the dosage of detergent must not be exceeded. After
handling some coloring products (for example, carrots) plastic parts
of the nozzle may become colored. After placing them in a dish
washing machine wipe them with vegetable oil.
After handling salty products the blender must be washed
immediately.
Let the blender completely dry.
Do not submerge and do not wash under a strong ow of water
the cover – chopper drive and the drive of wire whisk. It is
recommended to wipe them with a wet cloth; in case of strong
clogging it is allowed to wash the outside surfaces under a weak
water spray or with a wet napkin avoiding the splashes inside the
case.
EN
10
Wipe the case of the electric drive with a soft cloth and rub it dry
with a clean towel.
- Clean, wipe dry and dry the device before storage.
Storage
- Wipe and dry the appliance before storage.
- Store the appliance in a cool, dry and clean place beyond the
aссess of children and people with limited physical and mental
abilities.
Environmental protection
Old appliances contain valuable materials that can be recycled.
Please arrange for the proper recycling of old appliances. Please
dispose your old appliances using appropriate collection systems.
Subject to technical modications!
Table des matières
Langues :
