F&S Bondtec LAB-Tester LT-101 Manuel utilisateur
Service Manual Page 1
Service Manual Page 2
About this quick guide:
Service Manual Page 3
Table of contents
ABOUT THIS QUICK GUIDE: 2
4
4
5
5
5
6
6
6
7
7
8
8
8
8
9
10
11
12
13
13
13
14
15
15
16
16
16
16
17
17
18
Service Manual Page 4
Secure the bond tester off and before switching it
on again:
Service Manual Page 5
Mounting the protective cage
Remove the head cable.
Open the 4 fastening screws on the test head
Careful removal of the test head
Service Manual Page 6
Remove the axis cable.
Open the 4 fastening screws
Service Manual Page 7
Degrease and clean the spindle and linear guides
with cleanroom cloths and industrial alcohol or
spirit.
Then re-lubricate the spindle and the linear guides
with a machine grease suitable for cleanroom use.
(e.g.: ISOFLEX Klüber NBU 15)
Available under the order number VK-DIV-B00007
Service Manual Page 8
Service Manual Page 9
Service Manual Page 10
Autres manuels F&S Bondtec Équipement de test
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
