CDD 12V PLUS
www.ffgroup-tools.com
English | 7
make a connection from one terminal to another.
Shorting the battery terminals together may cause
f
-
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
fAvoid damage that can be caused by screws, nails and
-
f
voltage indicated on the nameplate of the charger.
f
insert jams. Be prepared for high reaction torque that
• The power tool is subject to overload or
•
f-
ing at least the highest no-load speed of the tool.
f
(including children) with reduced physical, sensory or
-
edge, unless they have been given supervision or in-
-
son responsible for their safety.
f
f
f
clamping devices or in a vice is held more securely
than by hand)
f
performing an operation where the cutting accessory
or fastener may contact hidden wiring or its own cord
(cutting accessory and fasteners contacting a “live”
f
the local utility company for assistance (contact with
-
water pipe will cause property damage or an electrical
fAlways wait until the machine has come to a complete
stop before placing it down. The tool insert can jam
and lead to loss of control over the power tool.
fDust from material such as paint containing lead,
some wood species, minerals and metal may be harm-
ful (contact with or inhalation of the dust may cause
with a dust extraction device when connectable.
f
1.
a. Before charging, read the instructions.
b.
c. Do not charge non-rechargeable batteries.
2.
a. The battery must be removed from the appliance
before it is scrapped.
b. The appliance must be disconnected from the sup-
ply mains when removing the battery.
c. The battery is to be disposed of safely.
d. Do not use non-rechargeable batteries.
e. Do not crush, open or burn the battery. Exposure
to potentially harmful materials may occur.
f. 2dry chemical extinguisher.
g. Do not expose to high temperatures >45°C. Cells
may degrade at high temperatures.
h. The battery must be charged by a constant current,
constant voltage transformer.
i. Charge battery regularly in conditions between 5°C
battery.
j. Store in a dry, well ventilated area within the rec-
ommended limits of 10°C to 30°C.
Do not use battery if it has been stored at 5°C or
less. Allow it to "normalize" at room temperature
l. During decommissioning remove the battery cell
for recycling separately to the product, which is
covered by the waste electrical and electronic
equipment directive. Insulate the terminals with
adhesive insulating tape to prevent a short circuit,
-
chine’s rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II and is designed for connec-
tion to a power supply matching that detailed on the
an extension lead is required, use an approved and
the instruction supplied with the extension lead.
fAs a substance under normal conditions of use it is not
considered a hazard to health. In the event of acciden-
tal release, measures to prevent spread must be ad-
hered. Do not contaminate rivers, waterways or drains.
fComposition of lithium-manganese, lithium-cobalt
and lithium salt as the organic solvent electrolyte
(nonaqueous liquid).
f-
-
ride and carbon monoxide may be released.
