Ezviz BC1-B2 Manuel utilisateur
1
Box Contents
Base Station (x1) *Camera Power Adapter (x1)
(for base station)
Power Adapter (x1)
(for camera)
USB Cable (x1) *Drill Template
*Magnetic Base *Screw Base *Mounting Plate
*Screw Kit Regulatory Information (x1) Quick Start Guide (x1)
• The number of cameras and their accessories depends on how many cameras are
included in the package you purchase.
• You can also purchase camera seperately as needed.
• The power adapter's appearance is subject to the actual one you have bought.
Basics
Camera
SYNC Button
Loudspeaker
Power Port
LED Indicator
Spotlight
PIR
Lens
Photoresistor
Name Description
SYNC Button • Power on: Hold for 2 seconds in shut-down state.
• Reset and get ready for pairing: Holdfor2seconds.
• Power off: Press the button three times within one second.
Power Port For charging the camera.
LED Indicator • Solid Blue: Camera starting up or being live viewed in the EZVIZ app.
• Fast-flashing Blue: Camera ready for pairing./Pairing in progress.
• Slow-flashing Red: Network exception.
• Fast-flashing Red: Camera exception.
• Solid Green: Camera fully charged.
• Slow-flashing Green: Charging.
2
Base Station
Loudspeaker
Power Button
Ethernet Port/
Network Indicator
Power Port
Reset Button
LED Indicator
Micro SD Card Slot
SYNC Button
Name Description
LED Indicator • Solid Green: The base station works properly.
• Solid Blue: The base station is not connected to the Internet.
• Flashing Blue: The base station is pairing with the camera.
• Solid White: Restore factory settings successfully.
• Flashing Red: An alarm occurs.
• Solid Red: SD card error.
SYNC Button • Short press to turn off the siren when an alarm occurs.
• Holdfor2secondstostartpairingwiththecamera(Pairingcanlastup
to 2 minutes).
Power Button Press to connect or cut off power.
Network Indicator Solid Green: The Ethernet cable is connected.
Reset Button Hold for 5 seconds to restart and reset all parameters to default.
Setup
Step 1: Charge the Camera (Optional)
Connect the camera to power outlet with the power adapter (5V 2A).
If the camera is powered off, short press the SYNC button to power on.
Power Outlet
Power Adapter
• Remove the camera from the wall before charging.
• Please do not charge the camera when the temperature exceeds 45 degrees or below 0
degrees.
• It is not allowed to charge the camera with power adapter outdoors.
• When charging, the camera will automatically turn on.
Step 2: Power on the Base Station
Connect the base station to power outlet with the power adapter (12V 1A).
Power Outlet
Power Adapter
3
Step 3: Connect the Base Station to the Internet
Connect the base station to an open LAN port on your router with Ethernet cable.
Ethernet Cable
Please make sure the router can access the Internet.
Step 4: Get the EZVIZ app
1.Connect your mobile phone to the Internet.
2.Search for EZVIZ in the App Store or Google PlayTM.
3.Download and install the EZVIZ app.
4.Launch the app and register an EZVIZ user account.
Step 5: Add the Base Station to Your EZVIZ Account
1.Login to the EZVIZ App.
2.On the Home screen, tap “+” on the upper-right corner to go to the scan QR code interface.
3.Scan the QR code on bottom of the base station or manually enter the serial number to
add the base station.
4.FollowtheEZVIZappwizardtonishnetworkcongurationofthebasestation.
5.When the base station is added to your EZVIZ account successfully, tap “Next” button to
link camera(s) to your base station.
Step 6: Pair Base Station with Camera(s)
1.Press andhold theSYNCbuttononthebasestationfor 2 seconds.TheLEDindicatorwill
ashblue.
2.Place the camera 1 to 3 ft (30 to100 cm) from the base station. Press and hold the SYNC
buttononthecamerafor2seconds.TheLEDindicatorwillfastashblue.
3.Wait for about 120 seconds, and tap to refresh the current page.
• The camera LED indicator slow-flashing red indicates the
pairing has failed, and you
can repeat above steps to try again.
• You can pair up to 4 cameras with each base station at the same time.
4
Camera Installation
Installation Location
Choose a location with a clear, unblocked field of view and with a good wireless signal to the base
station. Please keep the following tips in mind:
• Make sure the wall is strong enough to withstand three times the weight of the camera.
• Camera cannot be installed in front of an air conditioner or facing direct sunlight.
• Recommended installation height: 7-10 ft (2-3 m) above the ground.
25 ft (7.5 m)
Motion
Detection
Zone
Camera Field of View
7-10ft
(2-3 m)
• Make sure that side-to-side traffic crosses camera’s field of view. The camera’s motion sensor
is much more sensitive to side-to-side movement across its field of view than to movement
directly toward or away from the camera.
Best Detection
Poor
• It is recommended to set detection sensitivity on EZVIZ app when selecting location. Thus you
can verify if motion can be detected in the camera’s placement and adjust the sensitivity based
on the size and distance of detected object.
Installation Steps
Step 1 Place drill template ontoacleanandatsurface.
Step 2
(For the cement wall only) Drill screw holes according to the template, and insert anchors.
Step 3 Use screws to fix the mounting plate according to the template.
Step 4 Rotate the magnetic base (Fig.1) or screw base (Fig.2) to the mouting plate.
Step 5 Mount the camera to the base.
2
Drill Template
A A
Mounting Plate
Anchor
Drill Template
Screw
Magnetic Base
Camera
Fig.1 Mount by Magnetic Base
2
Drill Template
A A
Mounting Plate
Anchor
Drill Template
Screw
Screw Base
Camera
Fig.2 Mount by Screw Base
5
EXPOSURE TO RADIOFREQUENCY RF
The frequency bands and the nominal limits of transmitted power (radiated and/or conducted)
applicable to this radio device are the following:
Band Wi-Fi 2.4 GHz
Frequency From 2.412 GHz to 2.472 GHz
Power transmission (EIRP) 100 mW
For detailed information, please refer to www.ezviz.com.
Table des matières
Autres manuels Ezviz Système de sécurité
Ezviz
Ezviz T9 Manuel utilisateur
Ezviz
Ezviz C3A Manuel utilisateur
Ezviz
Ezviz EZ Wireless Kit Manuel utilisateur
Ezviz
Ezviz T3C Manuel utilisateur
Ezviz
Ezviz CS-W2D Manuel utilisateur
Ezviz
Ezviz A1 Manuel utilisateur
Ezviz
Ezviz T9 Manuel utilisateur
Ezviz
Ezviz Home Sense Manuel utilisateur
Ezviz
Ezviz CS-X5-108T Guide de dépannage
Ezviz
Ezviz Home Sense Manuel utilisateur
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur