eZLO PlugHub Manuel utilisateur
Quick Start Guide
Congratulations On
Choosing The Ezlo PlugHub Energy
And welcome to Vera, the smarter home control solution
that makes your home safer and your life easier.
It’s easy to set up your PlugHub.
Here’s hat you need to do.
Step 1
Install the Vera app on your mobile device. Just look for the in the iOS
App Store or on Google lay. If you already have the Vera app, just log in
and select Add New Controller.
Step 2
Open your Vera app and select lugHub from the controller list.
Step 3
Now put your lugHub into an outlet. It will power on automatically and the
blue LED will blink about once per second.
Step 4
The lugHub will create a temporary Wi-Fi network called lugHub_XXXX.
The Vera app will prompt you to go to the Settings menu on your mobile
device to connect to it.
If the temporary network is not visible, just tap Need Help in the app for
troubleshooting tips.
Step 5
Once you have selected the lugHub network, return to the Vera app and
follow the prompts to complete the setup process. While your lugHub
is connecting to your home Wi-Fi, it should blink once every three seconds.
Step 6
Congratulations, your lugHub has been set up successfully.
The LED will now remain a steady color.
Step 7
Now it’s time to create your Vera account. The app will walk you through
it, and once you’re done, the account will automatically be linked to your
lugHub.
Step 8
To use lugHub, you’ll want to plug in a lamp, or add other devices like sensors
or a thermostat to your Vera system. Just tap the menu icon in the top left
corner of the dashboard, select Devices, and then tap the + sign to launch the
Device airing Wizard.
Autres manuels eZLO Accessoires
