EZ OS-5100RA Manuel utilisateur
Oscilloscope
Analog Readout Oscilloscope
Operation Manual
Oscilloscope
Analog Readout Oscilloscope
Operation Manual
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’sName: EZDigitalCo.,Ltd.
Manufacturer’s Address: 222-28, Nae-dong, Ojeong-gu, Bucheon-si,
Gyeonggi-do R. O. K, 421-160
Declares that the product:
Product Name: OSCILLOSCOPE
Model Numbers: OS-5100RA
OS-5100RB
Date: Feb. . 1997.
Conforms to the following product specifications:
Safety: EN 61010-1 : 1993 + A2:1995
(IEC 10101 : 1990 + A1:1992
+A2:1995, modified)
CertifiedbyTUVRheinland
EMC: EN 55011 : 1991
EN 61000-3-2 :1995
EN 61000-3-3 :1995
EN 50082-1 :1992
CertifiedbyVDE
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC.
Bucheon, Gyeonggi
CheolYoung Kim
Location QualityAssurance Manager
WARRANTY
Warranty service covers a period of one year from the date of original purchase.
In case of technical failure within a year, repair service will be provided by our service
center or sales outlet free of charge.
We charge customers for repairs after the one year warranty period has been expired.
Provided that against any failure resulted from the user’s negligence, natural disaster or
accident, we charge you for repairs regardless of the warranty period.
For more professional repair service, be sure to contact our service center or sales
outlet.
Introduction
Thank you for purchasing a EZ product. Electronic measuring instruments produced by
EZ Digital are high technology products made under strict quality control. We guarantee
their exceptional precision and utmost reliability. For proper use of the product, please
read this operation manual carefully.
NOTE
1. To fully maintain the precision and reliability of the product use it within the range
of standard setting (temperature 10℃～35℃, humidity 45%～85%).
2. After turning of power, please allow a pre-heating period of as long as some 15
minutes before use.
3. This equipment should be used with a triple line power cord for safety.
4. For quality improvement the exterior design and specifications of the product can
be changed without prior notice.
5. If you have further questions concerning use, please contact the EZ Digital service
center or sales outlet.
Safety Summary
Safety Precautions
Please take a moment to review these safety precautions. They are provided for your
protection and to prevent damage to the oscilloscope. This safety information applies to
all operator and service personnel.
Caution and warning statements.
CAUTION : Is used to indicate correct operating or maintenance proceduresinorder
to prevent damage to destruction of the equipment or other property.
WARNING : Calls attention to a potential danger that requires correct procedures or
practices in order to prevent personal injury.
Caution (refer to accompanying documents) and Warning.
Protective ground (earth) symbol.
SPEC MODEL OS-5100SRS
* Environmental Charac.
1) Temperature range for
rated operation
+10℃to +35℃(+50℉to +95℉)
2) Max. ambient operating
temperature
0℃to +40℃(+32℉to +104℉)
-20℃to +70℃(-4℉to + 158℉)
3)
Max. storage temperature
4) Humidity range for
rated operation 45% to 85% RH
5) Max. ambient operating
humidity
35% to 85% RH
* READOUT
1) Cursor Readout ΔV, ΔT, 1/ΔT
2) Frequency Counter Marking for Auto setup from 100Hz to 50MHz
3) Resoultion 1/100 DIV
* Probe Adjust
1) probe Adjustment
About 1KHz 0.5Vp-p(±2%) square wave.
Duty rate : 50%
1-3. PRECAUTION
Before you operate this instrument, follow the following procedure to ensure safe
operation and to prevent any damage to the instrument.
1-3-1. Line Voltage Selection
1. Voltage Range : 90 ~ 250VAC
2. Frequency Range : 48 ~ 440 Hz
3. Fuse : 250V / 1.6A(Time Lag)
Caution This product has the ground chassis(3 wire power cord is used).
Check whether any other equipment connecting with this product requires
the transformer before use.
Do not directly connect it to the AC power nor to the circuit directly
connected to the AC power.
Otherwise serious personal injury or damage to this product for a long time
without trouble.
1-3-2. Installation and Handling Precautions
when placing the OS-5100RA(RB) in service at your workplace, observe the following
precautions for best instrument performance and longest service life.
1. Avoid placing this instrument in an extremely hot or cold place. Specifically,
don? leave this instrument in a close car, exposed to sunlight in midsummer,
or next to a space heater.
2. Do not use this instrument immediately after bringing it in from the cold. Allow
time for it to warm to room temperature. Similarly, don? move it from a warm
place to a very cold place, as condensation might impair its operation.
3. Do not expose the instrument to wet or dusty environments.
4. Do not place liquid-filled containers (such as coffee cups) on top of this
instrument. A spill could serious damage the instrument.
5. Do not use this instrument where it is subject to servere vibration, or strong
blows.
6. Do not place heavy objects on the case, or block the ventilation holes.
7. Do not use this oscilloscope in strong magnetic fields, such as near motors.
8. Do not insert wires, tools, etc. through the ventilation holes.
9. Do not leave a hot soldering iron near the instrument.
10. Pre-heating in necessary after moving.
11. Do not place this oscilloscope face down on the ground, or damage to
the knobs may result.
12. Do not use this instrument upright while BNC cables are attached to the
rear-panel connectors. This will damage the cable.
13. Do not apply voltages in excess of the maximum ratings to the input
connectors or probes.
14. This oscilloscope is to use UL listed double insulated probes only.
1-4. ACCESSORY
The following accessaries are included in the packing of this product :
1. Operating manual : 1 copy
2. AC power cord : 1 EA
3. Probe : 2 EA (option)
4. Fuse : 2 EA
1-5. SYMBOL
Caution : refer to accompanying documents.
Danger : High Voltage.
Protective ground (earth) terminal.
1-6. SAFETY
This instrument has been designed and tested in accordance with IEC Publication
1010-1 (overvoltage category Ⅱ, pollution degree 2), Safety requirements for
electrical equipment for measurement, control, and laboratory use. The CENELEC
regulations EN 61010-1 correspond to this standard. This instruction manual
contains important information and warning which have to be followed by the user
to ensure safe operation and to retain the oscilloscope in a safe condition.
The case, chassis and all measuring terminals are connected to the protective
earth contact of the appliance inlet. The instrument operates according to
Safety Class I (three-conductor power cord with protective earthing conductor
and a plug with earthing contact).
The mains/line plug shall only be inserted in a socket outlet provided with a
protective earth contact. The protective action must not be negated by the use of
an extension cord without a protective conductor.
The mains/line plug should be inserted before connections are made to measuring
circuits.
The grounded accessible metal parts (case, sockets, jacks) and the mains/line
supply contacts (line/live, neutral) of the instrument have been tested against
insulation breakdown with 1500Vrms.
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
