•The devices may only be operated when fully assembled.
•In hazardous areas, the devices must not be wiped or cleaned with a
dry cloth.
•The device must be switched off immediately if it is likely that it can
no longer be operated safely as a result of damaging impact or
general peculiarities (such as ingress of water or other fluids,
temperatures outside of the specified range, etc.).
•General statutory requirements or health and safety rules and
accident prevention guidelines and environmental laws must be
adhered to (e.g. the German Occupational Health and Safety
regulation).
•Users must not open the device.
•Users must not make any changes to the device. Components may
not be exchanged or replaced. If non-specified components are
used, explosion protection is no longer guaranteed.
•Ensure safe handling with firm footing and sufficient room for
movement.
•If the enclosure is in any way damaged the device must be removed
from the hazardous area immediately.
•In accordance with IEC 60079-19 and IEC 60079-17, operators of
electrical installation in hazardous areas are obliged to have them
serviced by qualified electricians.
•Do not insert any sharp objects into the enclosure or any other
openings of the handheld barcode scanner. Any openings at the
device may not be covered or blocked.
•The device and any accessories must be properly disposed of, i.e.
as legally specified, for example by a certified company.
