Extreme USB Intelix Series Manuel utilisateur
USB 2.0 DIGI-USB2-4P
4-Port USB 2.0 100m CAT 5e/6/7 Extender System
User Guide
Thank you for purchasing the DIGI-USB2-4P Extender System.
Please read this guide thoroughly.
This document applies to Part Numbers: 01-00448, 01-00449, 01-00450, 01-00451, 01-00537, 02-00028, and
02-00029.
FCC Radio Frequency Interference Statement Warning
This device complies with Part 15 of the FCC rules. Operaon is subject to the following two condions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received
including interference that may cause undesired operaon.
CE Statement
We declare under our sole responsibility that the USB 2.0 DIGI-USB2-4P, to which this declaraon relates, is in
conformity with European Standard EN 55022, EN 61000 and EN 55024.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulaons for the collecon and recycling of all waste electrical and
electronic equipment (WEEE). Implementaon of WEEE regulaons may vary slightly by individual EU member
states. Please check with your local and state government guidelines for safe disposal and recycling or contact
your naonal WEEE recycling agency for more informaon.
Product Operaon and Storage
Please read and follow all instrucons provided with this product, and operate for intended use only.
Do not aempt to open the product casing as this may cause damage and will void warranty. Use only the
power supply provided with this product. When not in use, product should be stored in a dry locaon between
-20°C and 70°C.
Contents
Introduction.............................................................................................................3
DIGI-USB2-4P Product Contents.................................................................................................... 3
About the DIGI-USB2-4P................................................................................................................... 3
The Local Extender ............................................................................................................................. 4
The Remote Extender ........................................................................................................................ 5
Installing the DIGI-USB2-4P System ......................................................................6
Requirements ....................................................................................................................................... 6
Preparing Your Site ............................................................................................................................. 6
Installing the Local Extender .......................................................................................................... 7
Connecting the Local Extender to the Remote Extender .................................................... 7
Installing the Remote Extender .................................................................................................... 7
Checking the Installation ................................................................................................................. 8
Connecting a USB Device................................................................................................................. 9
Compatibility ........................................................................................................................................ 9
USB Extender Mounting Options .........................................................................10
Option 1: USB Extender Mounting Kit .......................................................................................10
Option 2: USB Extender Direct Surface Mounting ................................................................11
Troubleshooting ....................................................................................................12
Technical Glossary.................................................................................................13
Specifications.........................................................................................................14
Introducon
This guide provides product informaon for the USB 2.0 DIGI-USB2-4P, installaon instrucons and
troubleshoong guidelines. The instrucons in this guide assume a general knowledge of computer installaon
procedures, familiarity with cabling requirements and some understanding of USB devices.
NOTE: Notes provide addional informaon that could be useful.
CAUTION: Cauons provide important informaon about an operaonal requirement.
USB 2.0 DIGI-USB2-4P Product Contents
Your DIGI-USB2-4P is packaged with:
• Local Extender
• Remote Extender
• USB 2.0 Cable
• Remote Extender AC Internaonal Power Adapter
• US Power Cable
• Quick Start Guide
About the DIGI-USB2-4P
The USB 2.0 DIGI-USB2-4P incorporates ExtremeUSB® technology, enabling users to extend USB beyond the
standard 5m cable limit for USB 2.0 peripheral devices. The DIGI-USB2-4P extender system is composed of two
individual units: the Local Extender and the Remote Extender and has the following key features:
• 100m of extension when directly connected over CAT 5e/6/7 cables
• Support for new USB 3.0 host controllers and devices
• Support for bulk and HID type devices (storage and mouse/keyboard types)
USB 3.0 devices will perform at USB 2.0 speeds if extended through the DIGI-USB2-4P.
note
3
note
The DIGI-USB2-4P includes the ExtremeUSB® suite of features:
• Transparent USB extension
• True plug and play; no soware drivers required
• Works with all major operang systems: Windows®, OS X® and Linux®
The Local Extender
The local extender unit connects to the computer using a standard USB 2.0 cable. Power for this unit is provided
by the host computer.
Front View
Rear View
ITEM TYPE DESCRIPTION
1 Power LED (Blue) LED turns on when power is supplied.
LED is o when no power is supplied by the host computer.
2 Link LED (Green)
Indicates a valid ExtremeUSB link is established between the local and remote
extenders.
LED turns on when link between local and remote extender is established.
LED is o when there is no link between local and remote extenders.
LED is slow blinking when the unit is aempng to establish a link.
3 Host LED (Green)
LED turns on when the DIGI-USB2-4P system is properly enumerated on the
host computer.
LED blinks when in a suspended state.
4Acvity LED
(Amber)
Indicates data transmission is occurring between local and remote extenders.
LED blinks intermiently with or without a USB device connected.
When the local and remote extenders are in suspend mode, the LED is o.
5Cong Reserved for manufacturer use.
6 Mode Reserved for manufacturer use.
7 USB Host Port Used to connect the local extender unit to the host computer. Accepts Type B
connector into the local extender unit.
8 Link Port (RJ45) Accepts RJ45 connector for CAT5e/6/7 cabling to connect the local extender unit
to the remote extender unit.
4
The Remote Extender
The remote extender unit provides USB Type A ports for standard USB devices. The remote extender unit allows
you to connect up to four USB devices directly. Addional devices may be connected by aaching up to four USB
hubs to the remote extender unit. The remote extender is powered by an external AC adapter and can supply
up to 600mA to each USB port.
Front View
Rear View
ITEM TYPE DESCRIPTION
1 USB Device Ports Accepts USB device(s) using Type A connectors.
2 Power LED (Blue) LED turns on when power is supplied, o when no power is supplied.
3 Link LED (Green) Indicates a valid ExtremeUSB link is established between the local and remote
extenders.
LED turns on when link between local and remote extenders is established.
LED is o when there is no link between local and remote extenders.
4 Host LED (Green) Indicates that the DIGI-USB2-4P system is properly enumerated on the host
computer. The LED blinks when in a suspended state.
5Acvity LED
(Amber)
Indicates data transmission is occurring between local and remote extenders.
LED blinks intermiently with or without a USB device connected.
When the local and remote extenders are in suspend mode, the LED is o.
6 DC Power Port Connects to the AC power supply. Required at the remote extender for proper
operaon.
7Cong Reserved for manufacturer use.
8 Mode Reserved for manufacturer use.
9 Link Port (RJ45) Accepts RJ45 connector for CAT 5e/6/7 cabling to connect the local extender
to the remote extender unit.
5
Local Extender
Host Computer
Remote Extender
All USB Devices
Up to100m between extenders over CAT 5e/6/7
Installing the DIGI-USB2-4P System
Requirements
To complete the installaon, you will require the following items that are not included with this system:
• USB compable computer (host computer) with a USB compliant operang system
• USB compable device(s)
• CAT 5e/6/7 Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling),
or CAT 5e/6/7 cabling with two informaon outlets and two CAT 5e/6/7 patch cords with RJ45
connectors (if using premise cabling).
Preparing Your Site
Before installing the DIGI-USB2-4P, you will need to prepare your site:
1. Place the computer where desired and set it up.
2. Ensure to locate the USB device(s) within a cable-length distance of 100m to the computer. If not,
adjust the locaon of the devices and/or computer accordingly.
3. If you are using surface cabling, install the CAT 5e/6/7 cabling as desired and terminate it with the
appropriate RJ45 ends.
4. If using premise cabling (in-building network infrastructure), ensure your cabling does not exceed
100m and that it meets CAT 5e/6/7 specicaon.
If you are using premise cabling, ensure CAT 5e/6/7 cabling is installed between the two locaons
and if necessary patched together. CAT 5e/6/7 informaon outlets should be located near the
computer and the USB device(s), and the total length, including patch cords must be less than 100m.
Cable installaon is important, parcularly if high throughput applicaons are used. When installing, ensure the cable is
installed away from, or isolated from potenal sources of interference such as electrical wiring, uorescent lighng, etc.
When terminang cables, ensure the matching RJ45 connector is used for the cable type. For example, if CAT 6 cable is
used, then CAT 6 compable RJ45 connectors must be used. If this care is not taken, the benets of higher grade
cabling may not be realized.
note
6
CAT 5e/6/7 Link Cable
USB cable
Installing the Local Extender
1. Place the local extender near the computer.
2. Connect the supplied USB cable between the local extender host port and a USB port on the
host computer.
Connecng the Local Extender to the Remote Extender
With Surface Cabling
1. Connect the CAT 5e/6/7 cable into the Link port of the Local Extender.
2. Connect the CAT 5e/6/7 cable into the Link port of the Remote Extender.
With Premise Cabling
1. Connect a CAT 5e/6/7 patch cable (not provided) into the informaon outlet near the host computer.
2. Connect the patch cable into the Link port of the local extender.
3. Connect a CAT 5e/6/7 patch cable (not provided) into the informaon outlet near the USB devices.
4. Connect the patch cable into the Link port of the remote extender.
Installing the Remote Extender
1. Place the remote extender near the USB device(s).
2. Assemble the power adapter and country specic power cord together and connect them into a
suitable AC outlet.
3. Connect the power adapter to the remote extender.
7
Checking the Installaon
1. On the local and remote extenders, check that the Power, Status, Link and Host LEDs are on.
If the Host or Link LEDs are permanently o, then the cabling between the local and remote
extenders may not be installed properly or is defecve.
2. For Windows users (XP, 7, 8), open Device Manager to conrm that the DIGI-USB2-4P has installed
correctly. Expand the entry for Universal Serial Bus controllers by clicking the “+” sign. If the
DIGI-USB2-4P has been installed correctly, you should nd it listed as a “Generic USB Hub”.
To open Device Manager in Windows XP:
Right click “My Computer” then select: Properes >> Hardware tab >> Device Manager
To open Device Manager in Windows 7:
Open the Start menu, right click on “Computer” then select: Manage >> Device Manager
To open Device Manager in Windows 8, 8.1 or 10:
Right click the Start Menu and then select: Device Manager
3. For OS X users, open the System Proler to conrm that the DIGI-USB2-4P has installed correctly.
In the le hand column under Hardware, select “USB” and inspect the right hand panel.
If the DIGI-USB2-4P has been installed correctly, you should nd it listed as a “Hub” under the
USB High-Speed Bus/USB Bus.
To open System Proler in OS X:
Open the Finder, select Applicaons, then open the Ulies folder and double click on the System Proler icon.
4. If the DIGI-USB2-4P is not detected correctly or fails to detect, please consult the Troubleshoong
secon in this guide.
note
note
note
8
note
Connecng a USB Device
1. Install any soware required to operate the USB device(s). Refer to the documentaon for the USB
device(s), as required.
2. Connect the USB device to the device port on the remote extender.
3. Check that the device is detected and installed properly in the operang system.
Compability
The USB 2.0 DIGI-USB2-4P complies with USB 1.1 and USB 2.0 specicaons governing the design of USB
devices. However, it is not possible to guarantee that all USB devices or hosts will be compable with the DIGI-
USB2-4P, as there are a number of dierent characteriscs that may impact the operaon of USB devices over
extended distances.
9
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Extreme USB Extenseur
Extreme USB
Extreme USB VU4500 Manuel utilisateur
Extreme USB
Extreme USB HDMI + USB 2.0 Extender Manuel utilisateur
Extreme USB
Extreme USB RV1850 Manuel utilisateur
Extreme USB
Extreme USB RG2304N Manuel utilisateur
Extreme USB
Extreme USB VU5353 Manuel utilisateur
Extreme USB
Extreme USB VU4500 Manuel utilisateur
Extreme USB
Extreme USB USB 2.0 RG2304 Network Series Manuel utilisateur
Extreme USB
Extreme USB Ranger 2301GE-LAN Manuel utilisateur
Extreme USB
Extreme USB RG2312 Manuel utilisateur
Extreme USB
Extreme USB RV2850 Manuel utilisateur
Extreme USB
Extreme USB USB 1.1 RV1850 Manuel utilisateur
Extreme USB
Extreme USB VU5200 Manuel utilisateur
Extreme USB
Extreme USB USB 2.0 RG2311 Manuel utilisateur
Extreme USB
Extreme USB USB 1.1 RV1850 Manuel utilisateur
Extreme USB
Extreme USB ADI Icron USB 2.0 Ranger 2304PoE Manuel utilisateur
Extreme USB
Extreme USB USB 2.0 RG2224 Manuel utilisateur
Extreme USB
Extreme USB USB 3.0 SP3022 Manuel utilisateur
Extreme USB
Extreme USB VU5100 DVI + USB 2.0 Manuel utilisateur
Extreme USB
Extreme USB USB 3.0 SP3022 Manuel utilisateur
Extreme USB
Extreme USB RG2311 Manuel utilisateur
