Extreme Networks BlackDiamond 6800 Manuel utilisateur
Extreme Networks, Inc.
3585 Monroe Street
Santa Clara, California 95051
(888) 257-3000
http://www.extremenetworks.com
Asynchronous Transfer
Mode (ATM) Module
Installation and User
Guide
Published: November 2001
Part number: 121049-00 Rev. 01
ii
©2001 Extreme Networks, Inc. All rights reserved. Extreme Networks and BlackDiamond are
registered trademarks of Extreme Networks, Inc. in the United States and certain other jurisdictions.
ExtremeWare, ExtremeWare Vista, ExtremeWorks, ExtremeAssist, ExtremeAssist1, ExtremeAssist2,
PartnerAssist, Extreme Standby Router Protocol, ESRP, SmartTraps, Alpine, Summit, Summit1,
Summit4, Summit4/FX, Summit7i, Summit24, Summit48, Summit Virtual Chassis, SummitLink,
SummitGbX, SummitRPS, and the Extreme Networks logo are trademarks of Extreme Networks, Inc.,
which may be registered or pending registration in certain jurisdictions. The Extreme Turbodrive logo
is a service mark of Extreme Networks, which may be registered or pending registration in certain
jurisdictions. Specifications are subject to change without notice.
All other registered trademarks, trademarks, and service marks are property of their respective owners.
Asynchronous Transfer Mode (ATM) Module Installation and User Guide iii
Contents
Preface
Introduction xi
Terminology xii
Conventions xii
Related Publications xiii
1Overview
BlackDiamond 6800 Series Switch Overview 1-1
BlackDiamond I/O Modules 1-2
About the ATM Module 1-3
Physical Description 1-4
Feature Summary 1-6
Function Summary 1-7
2 Installing or Replacing an ATM Module
Preparing for Installation 2-1
Software and Hardware Version Requirements 2-2
Cables and Connectors 2-3
Safety Information 2-3
Tools 2-4
I/O Module Slot Locations 2-4
Inserting and Securing a Module 2-7
iv Asynchronous Transfer Mode (ATM) Module Installation and User Guide
Making Network Interface Cable Connections 2-9
Verifying the Module Installation 2-10
LED Indicators 2-10
Displayed Slot Status Information 2-10
Troubleshooting 2-10
Identifying Problem Categories 2-12
Fixing Configuration Errors 2-13
Upgrading the Switch Software Image 2-14
Upgrading the ATM Module Software Image 2-14
Upgrading the ATM Module BootROM 2-15
Fixing Power-Related Problems 2-15
Fixing Link Down Problems 2-16
Identifying Conditions for Replacing an I/O Module 2-16
Removing and Replacing an I/O Module 2-17
Tools and Equipment 2-17
Removing an I/O Module 2-17
3 Configuring the ATM Module
Basic ATM Module Configuration Information 3-2
ATM Module Characteristics 3-2
Default ATM Module Configurations 3-3
Bridging and Routing Over ATM Ports 3-3
Configuring and Monitoring ATM Ports 3-9
Configuring PVCs 3-9
Deleting PVCs 3-9
Displaying ATM Port Status Information 3-10
Displaying PVC Status Information 3-11
Configuring ATM Scrambling 3-12
Configuring and Monitoring SONET 3-14
SONET Parameters and Values 3-14
Commands for Configuring and Monitoring SONET Features
on ATM Ports 3-15
Configuring SONET Framing 3-16
Configuring SONET Clocking 3-16
Configuring the Signal Fail Threshold 3-17
Configuring the Signal Degrade Threshold 3-17
Asynchronous Transfer Mode (ATM) Module Installation and User Guide v
Configuring the Section Trace Identifier 3-18
Configuring the Path Trace Identifier 3-18
Configuring the Signal Label 3-19
Resetting SONET Configuration Parameter Values 3-20
Displaying SONET Status Information on ATM ports 3-20
SONET Events on ATM Ports 3-21
Configuring VLAN-Related Attributes 3-24
Summary of VLAN-Related Commands 3-24
Configuring Tagged VLAN 802.1p and 802.1Q Functions 3-25
Generic VLAN Registration Protocol Functions 3-28
Configuring Forwarding Database Attributes 3-28
Configuring Spanning Tree Attributes 3-28
Configuring QoS Functions 3-29
Summary of QoS-Related Commands 3-29
Configuring a QoS Profile 3-30
Classification and Replacement Policies 3-31
Configuring DiffServ 3-33
Enhanced RED Support 3-36
QoS Monitor 3-44
Intra-Subnet QoS 3-44
Additional ATM Module Support Topics 3-45
Configuring General Switch Attributes 3-45
Configuring Port Attributes 3-46
Configuring IGMP Attributes 3-48
Configuring Layer 2 and 3 Switching Attributes 3-49
Configuring Access List Attributes 3-49
Changing Image and Configuration Attributes 3-49
A ExtremeWare Command Compatibility Information
Related to the ATM Module
New Commands A-1
New ExtremeWare Commands A-2
Changed Commands A-3
Commands and Functions Not Supported A-6
vi Asynchronous Transfer Mode (ATM) Module Installation and User Guide
B Supported MIBs and Standards
ATM Support B-2
MIBs Supported for ATM B-2
SONET/SDH Support B-2
Standards Supported for SONET/SDH B-2
MIBs Supported for SONET/SDH B-2
QoS and DiffServ Support B-3
Standards Supported for DiffServ B-3
B-3
Index
Index of Commands
Asynchronous Transfer Mode (ATM) Module Installation and User Guide vii
Figures
1-1 ATM module 1-4
1-2 Front panel view of the ATM module 1-6
2-1 Slot locations in a BlackDiamond 6800 series chassis 2-6
2-2 Inserting and securing an ATM module 2-8
3-1 Bridging over ATM ports 3-6
3-2 Routing over ATM ports 3-7
3-3 Comparisons of RED and WRED operation 3-38
viii Asynchronous Transfer Mode (ATM) Module Installation and User Guide
Asynchronous Transfer Mode (ATM) Module Installation and User Guide ix
Tables
1Notice Icons xii
2Text Conventions xiii
2-1 ATM Module and Port LEDs 2-12
3-1 Summary of ATM Receive Statistics 3-11
3-2 Summary of ATM Transmit Statistics 3-11
3-3 SONET Parameters and Values 3-14
3-4 SONET Features on ATM Ports Commands 3-15
3-5 Summary of SONET Statistics 3-21
3-6 SONET Events 3-21
3-7 VLAN-related Commands 3-24
3-8 QoS-Related Commands 3-29
3-9 Default Code Point-to-QoS Profile Mapping 3-33
3-10 Assured Forwarding Classes and Three-Level
Drop Precedence 3-41
3-11 Assured Forwarding Classes and Two-Level
Drop Precedence 3-41
3-12 Mapping PHBs to QoS Profiles 3-41
3-13 Changes to General Switch Commands 3-45
3-14 Changes to Port Commands 3-47
3-15 Changes to Image Commands 3-49
A-1 New ExtremeWare Commands A-2
A-2 Summary of Commands with Enhanced Syntax A-4
A-3 Summary of Commands with Augmented Implementation A-5
A-4 Summary of Commands Not Supported for ATM Ports A-6
x Asynchronous Transfer Mode (ATM) Module Installation and User Guide
Autres manuels pour BlackDiamond 6800
6
Ce manuel convient aux modèles suivants
13
Table des matières
Autres manuels Extreme Networks Accessoires
Extreme Networks
Extreme Networks BlackDiamond 6808 Manuel d'installation et d'exploitation
Extreme Networks
Extreme Networks BlackDiamond 6800 Manuel utilisateur
Extreme Networks
Extreme Networks BlackDiamond 6800 MPLS Manuel utilisateur
Extreme Networks
Extreme Networks BlackDiamond 6808 Manuel d'installation et d'exploitation
Extreme Networks
Extreme Networks Accessory Guide de l'utilisateur
Extreme Networks
Extreme Networks BlackDiamond 6816 Manuel d'installation et d'exploitation
Extreme Networks
Extreme Networks Innovation. Simplicity. Performance. Manuel utilisateur
Extreme Networks
Extreme Networks BlackDiamond 6800 Manuel utilisateur
Extreme Networks
Extreme Networks Alpine 3802 Manuel d'installation et d'exploitation
